Evo Pro User Manual Item no: 5152501 Need Help? Email: Service@XRockerNation.co.uk Phone: 01274 683 109 www.XRockerNation.co.uk IMPORTANT: You must keep your original retail receipt as proof of purchase. Welcome to X Rocker!
Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favourite games with glorious audio!
To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!
Table of contents Box contents and control panel overview
Wireless Connection guide: TV (All consoles)
Wired Connection guide: TV (All consoles)
Connect by controller (PS4 systems only)
Bluetooth Connection Guide
Troubleshooting tips
Health and safety information
Power supply safety information 2 B 9.84ft/3m 0.492ft/0.15m B1 - 3m 3.5mm to 3.5mm Audio cable
+
B1
+
B2 B2 - 15cm RCA to female 3.5mm audio cable B3 - RCA female to female adapters B4 - 0.15m 3.5mm to 3.5mm Audio cable 0.5ft/0.15m B5 Power Supply Cable B6 Wireless Transmitter
+
B3
+
B4
+
B5
+ B6 Control panel overview 3 Wireless connection guide: TV
(All consoles) To connect using the wireless transmitter, connect the Wireless transmitter (B6) to your TV set using the 3.5mm to 3.5mm cable (B1) TV/Mobile/Tablet B1 Once connected, Set the control panel on the chair and the Wireless transmitter to the same band (1,2,3) To get the best sound, make sure that the volume on the TV is set to approximately 50% of the maximum. Depending on the TV you may need to set the volume level separately in the TV sound settings menu. (Please refer to TV manual for guidelines.) 4 Wired connection guide: TV
(All consoles) TV/Mobile/Tablet B1 1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets. 2. Connect other end of B1 3.5mm end into the headphone socket of your television. 3. Once connected to your TV, increase volume to 50% of the maximum for the best sound level. **
** Depending on your TV you may need to increase the headphone volume separately in the TV sound settings. 5 Connect by controller:
(PS4 systems only) B1 1. Connect the B1 cable to the bottom of the PS4 controller via the headset socket. 2. Connect the other end of the B1 cable to the chair via the green port. 3. With the PS4 turned on, go to the main menu (or locate the main menu screen). Press and hold the PS button on the PS4 controller until the quick menu appears on screen. 4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum. 8. Set the control panel Wireless switch to the OFF position. 6 Bluetooth connection guide Step 1:
Switch the X Rocker Avantis wireless switch to the Bluetooth position. Step 2:
On the Audio output device go into its Bluetooth settings, turn Bluetooth on if it is not on already and search for XROCKER. Upon finding this, select the XROCKER option. If a passcode is required the four digit code will be 0000. 7 Troubleshooting tips Issue Troubleshooting steps No power going to control panel No sound Make sure that the power cable is connected correctly. Make sure that the power supply at the power source is working correctly. With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any lights flicker (or not) then please contact support (details below). Review the connection methods on the previous page and try alternative connection methods if possible. Confirm that the device/system is correctly configured as per previous connection guide. Make sure that the wireless channel switcher is in the corresponding position that suits your connection method.
(1,2,3 for wireless and AUX for wired connections). Wireless transmitter cuts out during gameplay/No vibration or subwoofer sound via analogue connection Please make sure that the volume of the source device is at a higher level to strengthen the audio signal. The cables connected to my X Rocker have been broken accidentally Please contact X Rocker support
(service@XRockerNation.co.uk) regarding this issue. Interference over wireless connection In this case, try another of the three wireless bands to isolate the signal. 8 Health and safety information Avoid immersing or allowing the X Rocker to come into contact with liquids. Please consult X Rocker Support before unscrewing any of the electrical components on the chair. Please be mindful of any cabling laid out between the X Rocker and power source/audio device. Please be mindful of cabling attached when moving/swivelling the X Rocker. If the cables or electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely. Do not stand on the X Rocker or exceed the 120kg weight limit via other means. Do not lean back on the chair to the point in which the pedestal would lift off the ground. X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for getting in/out of the chair. Playing audio for long periods at loud volumes may contribute to difficulties in hearing. Please be considerate to others when playing audio through the X Rocker speakers at higher volumes. 9 ATTENTION:
A. For Power Adapter, the apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable;
by manufacturer. Power Supply unit trademark: BI;
Model name: 36-090300-AdU;
Input: AC100-240V~50/60 Hz, 1.2A;
Output: DC 9V---3 Where you see the Crossed Out Wheelie Bin symbol it means that this product can be recycle and should not be disposed of in normal household rubbish. If you are in the EU, please take it to a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling. For all other countries please adhere to local recycling laws for electrical and electronic equipment. The recycling and processing of Waste Electrical and Electronic Equipment will make a significant contribution towards helping protect the enviroment by reducing landfill waste. Product complies with the European Safety Regulations 10 Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas causer d'interfrences, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dclaration dIC sur lexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur. Need Help? Email: service@acecasual.com Web: www.xrockernation.com Phone: 866-969-2603 7 Need Help? Email: Service@XRockerNation.co.uk Phone: 01274 683 109 www.XRockerNation.co.uk IMPORTANT: You must keep your original retail receipt as proof of purchase. Declaration of Conformity We ACE BAYOU CORP .
(Name of Applicant or his authorized representative) 1340 Poydras Street Suite 1870 New Orleans, LA 70112 USA
(Address) Declare under our own responsibility that the product Product description : X ROCKER NEW EVO PRO Model : 5152501
(Model, descriptions, versions, supplementary characteristics) to which this declaration refers conforms with the relevant standards or other documents EN 301 357 V2.1.1, EN 301 489-9 V2.1.1
(Titles, dates of publication of documents mentioned) According to the regulations in RED 2014/53/EU
(if necessary: directives, main regulations) 2018-8-01 Alei Cao
(Place, date) (Name and signature of person responsible)