FCC ID: HLZRTL8822CE 802.11 a/b/g/n/ac RTL8822CE Combo Module

by: Acer Incorporated latest update: 2021-10-27 model: RTL8822CE

Nine grants have been issued under this FCC ID from 10/15/2020 to 10/27/2021 (this is one of one hundred and sixty-four releases in 2021 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked drivers, troubleshooting guides, instructions, password defaults, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 7 8 9 Regulatory Information and Safety Guide Users Manual pdf 1.01 MiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 SG CB514-2H 2HT AAP-1 Users Manual pdf 767.81 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Users Manaul Regulatory Information and Safety Guide Users Manual pdf 1002.29 KiB November 25 2020 / May 30 2021 delayed release
1 2 3 4 5 6 7 8 9 Users Manual Users Manual pdf 1.19 MiB November 25 2020 / May 30 2021 delayed release
1 2 3 4 5 6 7 8 9 bCB514-2H CB514-2HT (Spherion 92) QG (20210813) Users Manual pdf 1.06 MiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Internal Photo Internal Photos pdf 645.14 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Internal Photos Internal Photos pdf 805.33 KiB November 25 2020 / May 30 2021 delayed release
1 2 3 4 5 6 7 8 9 External Photo External Photos pdf 462.30 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 External Photos External Photos pdf 533.65 KiB November 25 2020 / May 30 2021 delayed release
1 2 3 4 5 6 7 8 9 ID Label ID Label/Location Info pdf 187.20 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 ID Label/Location Info ID Label/Location Info pdf 106.20 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Label Location ID Label/Location Info pdf 72.50 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Appendix B DAE Probe Cal. Certificate RF Exposure Info pdf 1.30 MiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Appendix C Phantom Description Dipole Cal. Certificate RF Exposure Info pdf 1.43 MiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Authorization letter Cover Letter(s) pdf 20.15 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Class II permissive change letter Cover Letter(s) pdf 109.95 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Confidentiality Cover Letter(s) pdf 77.52 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Declaration of authorization Cover Letter(s) pdf 85.87 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Report NII Test Report pdf 1.08 MiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Report SAR RF Exposure Info pdf 950.68 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Setup Photos NII Test Setup Photos pdf 412.49 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Test Setup Photos SAR Test Setup Photos pdf 693.59 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Test Report BLE Test Report pdf 481.84 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Report WLAN Test Report pdf 1.01 MiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Setup Photos BLE Test Setup Photos pdf 376.30 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Test Setup Photos WLAN Test Setup Photos pdf 412.34 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Test Report Test Report pdf 489.33 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Setup Photos Test Setup Photos pdf 376.12 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 FCC CIIPC Letter Cover Letter(s) pdf 111.02 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Cover Letter(s) pdf November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 KDB inquiry 20200904 Operational Description pdf November 26 2020 confidential
1 2 3 4 5 6 7 8 9 Cover Letter(s) pdf November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 KDB Response to Inquiry to FCC Tracking Number 537457 Operational Description pdf November 26 2020 confidential
1 2 3 4 5 6 7 8 9 OP Antenna Report Operational Description pdf November 25 2020 confidential
1 2 3 4 5 6 7 8 9 Request for LT or STC confidentiality Cover Letter(s) pdf 77.52 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Test Report SAR Revised RF Exposure Info pdf 1.45 MiB November 30 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix B RF Exposure Info pdf 762.15 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C RF Exposure Info pdf 967.94 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 FCC Auth Ltr Change of ID Cover Letter(s) pdf 21.11 KiB October 05 2020 / October 15 2020
1 2 3 4 5 6 7 8 9 FCC Auth Ltr Change of ID New Grantee Cover Letter(s) pdf 99.20 KiB October 05 2020 / October 15 2020
1 2 3 4 5 6 7 8 9 RF 160 04, Declaration of authorization Cover Letter(s) pdf 86.48 KiB October 05 2020 / October 15 2020
1 2 3 4 5 6 7 8 9 Regulatory Information and Safety Guide Users Manual pdf 1.01 MiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 SG CB514-2H 2HT AAP-1 Users Manual pdf 767.81 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Users Manaul Regulatory Information and Safety Guide Users Manual pdf 1002.29 KiB November 25 2020 / May 30 2021 delayed release
1 2 3 4 5 6 7 8 9 Users Manual Users Manual pdf 1.19 MiB November 25 2020 / May 30 2021 delayed release
1 2 3 4 5 6 7 8 9 bCB514-2H CB514-2HT (Spherion 92) QG (20210813) Users Manual pdf 1.06 MiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Internal Photo Internal Photos pdf 645.14 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Internal Photos Internal Photos pdf 805.33 KiB November 25 2020 / May 30 2021 delayed release
1 2 3 4 5 6 7 8 9 External Photo External Photos pdf 462.30 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 External Photos External Photos pdf 533.65 KiB November 25 2020 / May 30 2021 delayed release
1 2 3 4 5 6 7 8 9 ID Label ID Label/Location Info pdf 187.20 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 ID Label/Location Info ID Label/Location Info pdf 106.20 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Label Location ID Label/Location Info pdf 72.50 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Appendix B DAE Probe Cal. Certificate RF Exposure Info pdf 1.30 MiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Appendix C Phantom Description Dipole Cal. Certificate RF Exposure Info pdf 1.43 MiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Authorization letter Cover Letter(s) pdf 20.15 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Class II permissive change letter Cover Letter(s) pdf 109.95 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Confidentiality Cover Letter(s) pdf 77.52 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Declaration of authorization Cover Letter(s) pdf 85.87 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Report NII Test Report pdf 1.08 MiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Report SAR RF Exposure Info pdf 950.68 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Setup Photos NII Test Setup Photos pdf 412.49 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Test Setup Photos SAR Test Setup Photos pdf 693.59 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Test Report BLE Test Report pdf 481.84 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Report WLAN Test Report pdf 1.01 MiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Setup Photos BLE Test Setup Photos pdf 376.30 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Test Setup Photos WLAN Test Setup Photos pdf 412.34 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 Test Report Test Report pdf 489.33 KiB October 18 2021 / October 27 2021
1 2 3 4 5 6 7 8 9 Test Setup Photos Test Setup Photos pdf 376.12 KiB October 18 2021 / April 17 2022 delayed release
1 2 3 4 5 6 7 8 9 FCC CIIPC Letter Cover Letter(s) pdf 111.02 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Request for LT or STC confidentiality Cover Letter(s) pdf 77.52 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Test Report SAR Revised RF Exposure Info pdf 1.45 MiB November 30 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix B RF Exposure Info pdf 762.15 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 Test Report SAR Appendix C RF Exposure Info pdf 967.94 KiB November 25 2020 / December 08 2020
1 2 3 4 5 6 7 8 9 FCC Auth Ltr Change of ID Cover Letter(s) pdf 21.11 KiB October 05 2020 / October 15 2020
1 2 3 4 5 6 7 8 9 FCC Auth Ltr Change of ID New Grantee Cover Letter(s) pdf 99.20 KiB October 05 2020 / October 15 2020
1 2 3 4 5 6 7 8 9 RF 160 04, Declaration of authorization Cover Letter(s) pdf 86.48 KiB October 05 2020 / October 15 2020

frequency equipment class purpose
1 2021-10-27 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2412 ~ 2472 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2020-12-08 2412 ~ 2472 DTS - Digital Transmission System
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
7 2020-10-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
8 2412 ~ 2472 DTS - Digital Transmission System
9 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 8 9 Effective 2021-10-27
1 2 3 4 5 6 7 8 9 2020-12-08
1 2 3 4 5 6 7 8 9 2020-10-15
1 2 3 4 5 6 7 8 9 Applicant's complete, legal business name Acer Incorporated
1 2 3 4 5 6 7 8 9 FCC Registration Number (FRN) 0013355508
1 2 3 4 5 6 7 8 9 Physical Address 9F, 88, Sec. 1, Xintai 5th Rd.
1 2 3 4 5 6 7 8 9 8F, 88, Sec 1, Hsin Tai Wu Rd
1 2 3 4 5 6 7 8 9 New Taipei City, N/A
1 2 3 4 5 6 7 8 9 Hsichih, Taipei Hsien, N/A
1 2 3 4 5 6 7 8 9 Taiwan
app s TCB Information
1 2 3 4 5 6 7 8 9 TCB Application Email Address c******@telefication.com
1 2 3 4 5 6 7 8 9 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 7 8 9 Grantee Code HLZ
1 2 3 4 5 6 7 8 9 Equipment Product Code RTL8822CE
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 8 9 Name H**** S**** L******
1 2 3 4 5 6 7 8 9 Title Manager
1 2 3 4 5 6 7 8 9 Telephone Number 886-2******** Extension:
1 2 3 4 5 6 7 8 9 Fax Number 886-2********
1 2 3 4 5 6 7 8 9 E-mail H******@acer.com
1 2 3 4 5 6 7 8 9 H******@acer.com.tw
app s Technical Contact
1 2 3 4 5 6 7 8 9 Firm Name SGS Taiwan Ltd.
1 2 3 4 5 6 7 8 9 SGS Taiwan Ltd
1 2 3 4 5 6 7 8 9 Name J******** C********
1 2 3 4 5 6 7 8 9 J****** C********
1 2 3 4 5 6 7 8 9 Physical Address 134, Wu Kung Road, WuKu Industrial Zone
1 2 3 4 5 6 7 8 9 134, Wu Kung Road, Wuku Industrial Zone
1 2 3 4 5 6 7 8 9 Taiwan
1 2 3 4 5 6 7 8 9 Telephone Number +8862******** Extension:
1 2 3 4 5 6 7 8 9 886 2********
1 2 3 4 5 6 7 8 9 88622******** Extension:
1 2 3 4 5 6 7 8 9 Fax Number 88622********
1 2 3 4 5 6 7 8 9 886 2********
1 2 3 4 5 6 7 8 9 E-mail j******@sgs.com
app s Non Technical Contact
1 2 3 4 5 6 7 8 9 Firm Name SGS Taiwan Ltd.
1 2 3 4 5 6 7 8 9 SGS Taiwan Ltd
1 2 3 4 5 6 7 8 9 Name J****** C********
1 2 3 4 5 6 7 8 9 Physical Address 134, Wu Kung Road, WuKu Industrial Zone
1 2 3 4 5 6 7 8 9 134, Wu Kung Road, Wuku Industrial Zone
1 2 3 4 5 6 7 8 9 Taiwan
1 2 3 4 5 6 7 8 9 Telephone Number +8862******** Extension:
1 2 3 4 5 6 7 8 9 886 2********
1 2 3 4 5 6 7 8 9 88622******** Extension:
1 2 3 4 5 6 7 8 9 Fax Number 88622********
1 2 3 4 5 6 7 8 9 886 2********
1 2 3 4 5 6 7 8 9 E-mail j******@sgs.com
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 8 9 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 8 9 No
1 2 3 4 5 6 7 8 9 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 8 9 No
1 2 3 4 5 6 7 8 9 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)04/17/2022
1 2 3 4 5 6 7 8 9 05/30/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 8 9 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 8 9 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 8 9 DTS - Digital Transmission System
1 2 3 4 5 6 7 8 9 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 8 9 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11 a/b/g/n/ac RTL8822CE Combo Module
1 2 3 4 5 6 7 8 9 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 7 8 9 Yes
1 2 3 4 5 6 7 8 9 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 8 9 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 7 8 9 Change in Identification
1 2 3 4 5 6 7 8 9 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 8 9 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 8 9 Grant CommentsC2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 1.07 W/kg and 1.07W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 1.01 W/kg and 1.01W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 0.25 W/kg and 0.25W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 3 4 5 6 7 8 9 C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 1.15 W/kg, and 1.23 W/kg, respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.08 W/kg, and 1.25 W/kg, respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 3 4 5 6 7 8 9 C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 1.17 W/kg, and 1.25 W/kg, respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 3 4 5 6 7 8 9 Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
1 2 3 4 5 6 7 8 9 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 8 9 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 8 9 Firm Name SGS Taiwan Ltd. Central RF Lab
1 2 3 4 5 6 7 8 9 Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
1 2 3 4 5 6 7 8 9 Name R**** W****
1 2 3 4 5 6 7 8 9 R******** C****
1 2 3 4 5 6 7 8 9 Telephone Number +886-******** Extension:
1 2 3 4 5 6 7 8 9 +886-********
1 2 3 4 5 6 7 8 9 Fax Number +886-********
1 2 3 4 5 6 7 8 9 E-mail r******@sgs.com
1 2 3 4 5 6 7 8 9 r******@bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.203
1 2 15E CC MO ND 5260 5320 0.207
1 3 15E CC MO ND 5500 5720 0.217
1 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.016
2 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.016
4 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.203
6 2 15E CC MO ND 5260 5320 0.207
6 3 15E CC MO ND 5500 5720 0.217
6 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.016
8 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5180 5240 0.203
9 2 15E CC MO ND 5260 5320 0.207
9 3 15E CC MO ND 5500 5720 0.217
9 4 15E CC MO 5745 5825 0.308

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC