FCC ID: HLZ-BRCM1050 802.11g/DRAFT 802.11n WLAN PCI-E MINICARD

Inserting a SIM card Note: Illustrations are for reference only. Actual product specifications may vary. Please read and observe the manufacturer's precautions and safety information provided with your SIM card. This computer will only accept a valid SIM card. To insert a SIM card:

1. Turn your system off and disconnect the AC adapter. E n g l i s h 2. Unlock the battery security lock(2-1) and battery release latch(2-2). 3. Remove the battery from the bay. 2-2 2-1 3 4. Insert the SIM card as shown by the icon

. 5. Install the battery pack then turn your system on. Enabling your wireless devices The Launch Manager allows you to enable and disable the various wireless connectivity devices on your computer. Press <Fn> + <F3> to bring up the Launch Manager window panel. h s i l g n E F3 Fn Click On to enable wireless/3G/Bluetooth connection. Click Off to disable. How to use the 3G Connection Manager software The 3G Connection Manager allows you to connect to a 3G network and includes tools that allow you to manage your usage, send and receive SMS messages from your computer and choose your network preferences. Note: Please ensure the 3G function is enabled on your system. Accessing the 3G Connection Manager software Double-click the 3G Connection Manager icon 3G in the Windows Notification Area

. on the desktop, or click on Insrer une carte SIM Remarque : Les illustrations sont mises uniquement a titre de reference. Les caracteristiques reelles des produits peuvent changer. Veuillez lire et respecter les prcautions et les informations de scurit du fabricant fournies avec votre carte SIM. Cet ordinateur nacceptera quune carte SIM valide. Pour insrer une carte SIM :

1. teignez votre systne et deconnectez ladaptateur secteur. F r a n a i s 2. Dverrouillez le verrou de scurit de la batterie (2-1) et le loquet de libration de la batterie (2-2). 3. Retirez la batterie de la baie. 2-2 2-1 3 4. Insrez la carte SIM comme indiqu par licne

. 5. Installez la batterie puis allumez votre systme. Activer vos appareils sans fil Launch Manager permet dactiver et dsactiver les diffrents priphriques de connectivit sans fil sur votre ordinateur. Appuyez <Fn> + <F3> pour faire apparatre la fentre de Launch Manager. s i a n a r F F3 Fn Cliquez sur Activ pour activer la connexion sans fil/3G/Bluetooth. Cliquez sur Dsactiv pour dsactiver. Comment utiliser le logiciel 3G Connection Manager 3G Connection Manager permet de vous connecter un rseau 3G et comprend des outils qui permettent de grer votre utilisation, denvoyer et de recevoir des SMS depuis votre ordinateur et de choisir vos prfrences rseau. Remarque : Veuillez vous assurer que la fonction 3G est active sur votre systme. Accder au logiciel 3G Connection Manager Double-cliquez sur licne 3G Connection Manager cliquez sur 3G dans la Zone de notification de Windows

. sur le bureau, ou Einsetzen einer SIM-Karte Hinweis: Abbildung nur Referenz und kann zum Produkt variieren. Das tatschliche Produkt kann sich von dem in den Abbildungen gezeigten unterscheiden. Lesen und beachten Sie bitte die Vorsichtsmanahmen und Sicherheitshinweise des Herstellers, die der SIM-Karte beigelegt sind. Fr diesen Computer kann nur eine gltige SIM-Karte verwendet werden. So setzen Sie eine SIM-Karte ein:

1. Schalten Sie das System aus und trennen Sie den Wechselstromadapter vom Gert. D e u t s c h 2. ffnen Sie das Sicherheitsschloss (2-1) und lsen Sie die Verriegelung des Akkus (2-2). 3. Nehmen Sie den Akku aus dem Fach. 2-2 2-1 3 4. Setzen Sie die SIM-Karte entsprechend des Symbols ein

. 5. Setzen Sie den Akku wieder ein und schalten Sie das System ein. Aktivierung von Drahtlos-Gerten Mit dem Startmanager knnen Sie verschiedene Drahtlosverbindungs-

Gerte auf dem Computeer aktivieren und deaktivieren. Drcken Sie auf <Fn> + <F3>, um das Startmanager-Fenster aufzurufen. F3 Fn h c s t u e D Klicken auf Ein, um die Drahtlos/3G/Bluetooth Verbindung zu aktivieren. Klicken Sie zum Deaktivieren auf Aus. Verwendung der 3G-Verbindungsmanager-

Software Mit dem 3G Connection Manager knnen Sie eine Verbindung zu einem 3G-Netz herstellen. Das Programm besitzt auch Funktionen zur Verwaltung Ihrer Verwendungweise, zum Senden und Empfangen von SMS-Nachrichten auf Ihrem Computer und zum Auswhlen Ihrer Netzvoreinstellungen. Hinweis: Stellen Sie sicher, dass die 3G-Funktion auf dem System aktiviert ist. Zugriff auf die 3G Connection Manager-Software Doppelklicken Sie auf das Symbol des 3G Connection Managers Desktop oder klicken Sie auf 3G im Infobereich von Windows

. auf dem Inserimento della carta SIM Nota: Le illustrazioni sono di solo riferimento. I prodotti potrebbero variare da quanto riportato. Leggere e osservare le precauzioni del costruttore e le informazioni sulla sicurezza fornite con la carta SIM. Questo computer accetta solo una carta SIM valida. Per inserire una carta SIM:

1. Spegnere il sistema e staccare la spina di rete. I t a l i a n o 2. Sbloccare il blocco di sicurezza della batteria (2-1) e il dispositivo di aggancio della batteria (2-2). 3. Rimuovere la batteria dall'alloggiamento. 2-2 2-1 3 4. Inserire la carta SIM come indicato dall'icona

. 5. Installare il pacco batteria, quindi accendere il sistema. Attivazione dei dispositivi wireless Launch Manager consente di attivare e disattivare i vari dispositivi di connessione wireless sul computer. Premere <Fn> + <F3> per richiamare il pannello di controllo di Launch Manager. F3 Fn o n a i l a t I Fare clic su On per attivare la connessione wireless/3G/Bluetooth. Fare clic su Off per disattivare. Come utilizzare il software 3G Connection Manager 3G Connection Manager consente di eseguire il collegamento a una rete 3G e include strumenti che consentono di gestire luso, inviare e ricevere messaggi SMS dal computer e scegliere le preferenze di rete. Nota: Verificare che la funzione 3G sia attiva sul sistema. Accesso al software 3G Connection Manager Fare doppio clic sull'icona 3G Connection Manager su 3G nell'Area di notifica di Windows

. sul desktop, o fare clic Insertar una tarjeta SIM Nota: Las ilustraciones son solo una referencia. Las especificaciones reales del producto pueden ser diferentes. Lea y respete las precauciones del fabricante y la informacin de seguridad que acompaa a su tarjeta SIM. Este ordenador solo aceptar una tarjeta SIM vlida. Para insertar una tarjeta SIM:

1. Apague el sistema y desconecte el adaptador de corriente. 2. Desbloquee el cierre de seguridad (2-1) y la pestaa de liberacin de la batera (2-2). 3. Extraiga la batera del compartimento. E s p a o l 2-2 2-1 3 4. Inserte la tarjeta SIM de la forma que indica el icono

. 5. Instale la batera y luego encienda el sistema. Habilitar dispositivos inalmbricos Launch Manager le permite activar y desactivar los distintos dispositivos de conectividad inalmbrica de su ordenador. Pulse <Fn> + <F3> para abrir el panel de ventanas de Launch Manager. F3 Fn Haga clic en Activado para habilitar la conexin inalmbrica/3G/Bluetooth. Haga clic en Desactivado para deshabilitar. l o a p s E Cmo usar el software 3G Connection Manager El 3G Connection Manager le permite conectarse a una red 3G e incluye herramientas que le permiten gestionar su uso, enviar y recibir SMS desde su ordenador y seleccionar sus preferencias de red. Nota: Asegrese de que la funcin 3G est habilitada en su sistema. Acceder al software 3G Connection Manager Haga doble clic en el icono de 3G Connection Manager haga clic en 3G en el rea de notificacin de Windows

. en el escritorio o Inserir um carto SIM Nota: As ilustraes so apenas para referncia. As especificaes reais do produto podem variar. Leia e siga as informaes de precauo e segurana do fabricante fornecidas com o seu carto SIM. Este computador apenas aceita um carto SIM vlido. Para inserir um carto SIM:

1. Desligue o sistema e o adaptador CA. 2. Destranque o fecho de segurana (2-1) e a lingueta da bateria (2-2). 3. Remova a bateria do compartimento. 2-2 2-1 P o r t u g u s 3 4. Insira o carto SIM como mostrado no cone

. 5. Instale a bateria e depois ligue o seu sistema. Activar os seus dispositivos sem fios O Launch Manager permite-lhe activar e desactivar os diversos dispositivos sem fios no seu computador. Prima <Fn> + <F3> para abrir o painel do Launch Manager. F3 Fn Clique Ligar para activar a ligao sem fios/3G/bluetooth. Clique Deslig. para desactivar. Como utilizar o software 3G Connection Manager O 3G Connection Manager permite-lhe ligar-se a uma rede 3G e inclui ferramentas que lhe permitem gerir a sua utilizao, enviar e receber mensagens SMS do seu computador e escolher as preferncias da sua rede. Nota: Certifique-se que a funo 3G est activada no seu sistema. s u g u t r o P Aceder ao software 3G Connection Manager Clique duas vezes no cone do 3G Connection Manager trabalho, ou clique em 3G na rea de Notificao do Windows

. no ambiente de Een simkaart plaatsen Opmerking: Illustraties dienen uitsluitend ter verwijzing. Daadwerkelijke productspecificaties kunnen afwijken. Lees en volg de, door de fabrikant verstrekte, voorzorgsmaatregelen en veiligheidsinformatie op die bij de simkaart zijn geleverd. Deze computer accepteert uitsluitend een geldige simkaart. Zo plaatst u een simkaart:

1. Schakel het systeem uit en maak de adapter los. 2. Maak het veiligheidsslot van de batterij (2-1) en de batterijvergrendeling

(2-2) los. 3. Haal de accu uit de nis. 2-2 3 2-1 N e d e r l a n d s 4. Plaats de simkaart zoals is aangegeven door het pictogram

. 5. Plaats de accu terug en zet het systeem aan. Het draadloos apparaat inschakelen Met Launch Manager kunt u de diverse apparaten voor draadloze verbindin-

gen op de computer in- en uitschakelen. Druk op <Fn> + <F3> om het venster van Launch Manager te openen. F3 Fn Klik op Aan om een draadloze/3G/Bluetooth-verbinding in te schakelen. Klik op Uit om het uit te schakelen. De software 3G Connection Manager gebruiken Met 3G Connection Manager kunt u verbinding maken met een 3G-netwerk. Daarnaast bevat het hulpmiddelen om uw gebruik te beheren, om sms'jes vanaf de computer te verzenden en ontvangen en kunt u de netwerkvoorkeuren aanpassen. Opmerking: Zorg dat de 3G-functie van het systeem is ingeschakeld. s d n a l r e d e N De software 3G Connection Manager openen Dubbelklik op het pictogram 3G Connection Manager klik op 3G in het systeemvak van Windows

. op het bureaublad, of SIM SIM SIM SIM 1. 2. (2-1) (2-2) 3. 2-2 3 4. SIM 5. 2-1 Launch Manager

<Fn> + <F3> Launch Manager F3 Fn

/3G/

[3G Connection Manager]

[3G Connection Manager] 3G 3G

[3G Connection Manager]

[3G Connection Manager] Windows 3G SIM SIM SIM SIM 1. AC 2. (2-1) (2-2) 3. 2-2 3 4. SIM 2-1 5. Launch Manager

<Fn> + <F3> Launch Manager F3 Fn

/3G/

3G Connection Manager 3G Connection Manager 3G SMS 3G 3G Connection Manager 3G Connection Manager Windows 3G

Aspire One Series Generic User Guide 2011 All Rights Reserved Aspire One Series Generic User Guide Original Issue: 06/2011 Model number: _____________________________________ Serial number: _____________________________________ Date of purchase: __________________________________ Place of purchase: _________________________________ Information for your safety and comfort iii E n g l i s h Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. CAUTION for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the power supply unit:

Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the computer. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. CAUTION for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. CAUTION for bundled dummy cards (only for certain models) Your computer shipped with plastic dummies installed in the card slots. Dummies protect unused slots from dust, metal objects or other particles. Save the dummies for use when no cards are in the slots. CAUTION for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. iv Warnings h s i l g n E Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, HDD, optical drive, and even exposure risk from lithium battery pack. The bottom surface, areas around ventilation openings and AC adapter may get hot. To avoid injury, ensure they do not come in contact with your skin or body. Note: Reduce the risk of heat-induced injury or fire by adhering to the following:

1) Do not place the computer or AC adapter on a soft surface, such as a bed. 2) Do not rest the computer or AC adapter on your lap for extended periods. 3) Use the computer on a flat, hard surface, such as a desk. 4) Ensure that the ventilation is not obstructed. Your device and its enhancements may contain small parts. Keep them out of the reach of children. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit v rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. E n g l i s h Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. The system can be powered using a wide range of voltages: 100 to 120 or 220 to 240 V AC. The power cord included with the system meets the requirements for use in the country/region where the system was purchased. Power cords for use in other countries/regions must meet the requirements for that country/

region. For more information on power cord requirements, contact an authorized reseller or service provider. Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

The power cord or plug is damaged, cut or frayed. Liquid was spilled into the product. The product was exposed to rain or water. The product has been dropped or the case has been damaged. The product exhibits a distinct change in performance, indicating a need for service. The product does not operate normally after following the operating instructions. Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. h s i l g n E vi Guidelines for safe battery usage This notebook uses a Lithium-ion battery. Do not use it in a humid, wet or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 60 C (140 F). Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at temperatures below 0 C (32 F) or above 40 C (104 F). The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the operation time becomes noticeably shorter than normal, buy a new battery. Use only the approved batteries, and recharge your battery only with the approved chargers designated for this device. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. The capacity and lifetime of the battery will be reduced if the battery is left in hot or cold places, such as in a closed car in summer or winter. Always try to keep the battery between 15C and 25C (59F and 77F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is especially limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Wireless devices may be susceptible to interference from the battery, which could affect performance. Replacing the battery pack The notebook uses lithium batteries. Replace the battery with the same type as that which came bundled with your product. Use of another battery may present a risk of fire or explosion. Warning! Batteries may explode if not handled properly. Do not disassemble or dispose of them in fire. Keep them away from children. Follow local regulations when disposing of used batteries. Operating environment vii E n g l i s h Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your laptop under the following conditions. These devices may include, but are not limited to:

wireless LAN (WLAN), Bluetooth and/or 3G. Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used normally, and it and its antenna are positioned at least 1.5 centimeters (5/8 inches) away from your body. It should not contain metal and you should position the device the above-stated distance from your body. To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions. Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:

Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker Not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it. Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. h s i l g n E viii Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic anti-

skid (anti-lock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Do not switch the notebook on when wireless phone use is prohibited or when it may cause interference or danger. Emergency calls Warning: You cannot make emergency calls through this device. To make an emergency call you shall dial out through your mobile phone or other telephone call system. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit www.acer-group.com/public/Sustainability/sustainability01.htm. ix E n g l i s h Mercury advisory For bulb-inside projectors or electronic products containing a non-LED-

backlit-LCD/CRT monitor or display: Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org. ENERGY STAR Acer's ENERGY STAR qualified products save your money by reducing energy cost and protecting the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR?

Products that are ENERGY STAR qualified use less energy and prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. Acer is committed to offering products and services worldwide that help customers save money, conserve energy and improve the quality of our environment. The more energy we can save through higher energy efficiency, the more we reduce greenhouse gases and the risks of climate change. More information refers to www.energystar.gov or www.energystar.gov/powermanagement. Acer ENERGY STAR qualified products: (only for certain models) Produce less heat and reduce cooling loads, and warmer climates. Automatically go into "display sleep" and "computer sleep" mode after 10 and 30 minutes of inactivity respectively. Wake the computer from sleep mode by pushing keyboard or moving mouse. Computers will save more than 80% energy at "sleep" mode. ENERGY STAR is only available for certain models and have the ENERGY STAR certification mark on the palm rest. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks h s i l g n E x Tips and information for comfortable use Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditions, personal health and other factors greatly increase the risk of physical injury. Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders. The following symptoms may appear in the hands, wrists, arms, shoulders, neck or back:

If you have these symptoms, or any other recurring or persistent discomfort and/or pain related to computer use, consult a physician immediately and inform your company's health and safety department. The following section provides tips for more comfortable computer use. Numbness, or a burning or tingling sensation. Aching, soreness or tenderness. Pain, swelling or throbbing. Stiffness or tightness. Coldness or weakness. Finding your comfort zone Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the following tips:

Refrain from staying too long in one fixed posture. Avoid slouching forward and/or leaning backward. Stand up and walk around regularly to remove the strain on your leg muscles. Take short rests to relax your neck and shoulders. Avoid tensing your muscles or shrugging your shoulders. Install the external display, keyboard and mouse properly and within comfortable reach. If you view your monitor more than your documents, place the display at the center of your desk to minimize neck strain. Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes Rest your eyes frequently. Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. Blink frequently to keep your eyes from drying out. E n g l i s h xi Display Keep your display clean. Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display. Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity. Eliminate glare and reflections by:

placing your display in such a way that the side faces the window or any light source minimizing room light by using drapes, shades or blinds using a task light changing the display's viewing angle using a glare-reduction filter using a display visor, such as a piece of cardboard extended from the display's top front edge Avoid adjusting your display to an awkward viewing angle. Avoid looking at bright light sources for extended periods of time. Developing good work habits The following work habits make computer use more relaxing and productive:

Take short breaks regularly and often. Perform some stretching exercises. Breathe fresh air as often as possible. Exercise regularly and maintain a healthy body. Warning! We do not recommend using the computer on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. Note: For more information, please refer to "Regulations and safety notices" on page 36. xii First things first We would like to thank you for making an Acer notebook your choice for meeting your mobile computing needs. h s i l g n E Product Registration When using your computer for the first time, it is recommended that you immediately register it. This will give you access to some useful benefits, such as:

Faster service from our trained representatives Membership in the Acer community: receive promotions and participate in customer surveys The latest news from Acer Hurry and register, as other advantages await you!

How to Register During the initial startup of your notebook or desktop, a window will invite you to register. Please fill in the mandatory fields and click Next. The second window you'll see contains optional fields that will help us to provide you with a more personable customer service experience. Another Option Another way to register your Acer product is to visit our website at http://registration.acer.com. Choose your country and follow the simple instructions. After we receive your product registration, you will be sent a confirmation email with important data that you should keep in a safe place. Your guides To help you use your Acer notebook, we have designed a set of guides:

First off, the setup poster helps you get started with setting up your computer. The Aspire One Series User Guide contains useful information applying to all models in the Aspire One product range. It covers basic topics such as Acer eRecovery Management, using the keyboard, audio, etc. Please understand that due to its nature, the Generic User Guide as well as the AcerSystem User Guide will occasionally refer to functions or features which are only contained in certain models, but not necessarily in the model you have purchased. Such instances are marked in the text with language such as "only for certain models". The Quick Guide introduces you to the basic features and functions of your new computer. For more on how your computer can help you to be more productive, please refer to the AcerSystem User Guide, which contains detailed information on such subjects as system utilities, data recovery, expansion options and troubleshooting. In addition it contains warranty information and the general regulations and safety notices for your notebook. It is available in Portable Document Format (PDF) and comes preloaded on your notebook. Follow these steps to access it:

1 Click Start > All Programs > AcerSystem. 2 Click AcerSystem User Guide. E n g l i s h xiii Note: Viewing the file requires Adobe Reader. If Adobe Reader is not installed on your computer, clicking on AcerSystem User Guide will run the Adobe Reader setup program first. Follow the instructions on the screen to complete the installation. For instructions on how to use Adobe Reader, access the Help and Support menu. Basic care and tips for using your computer Turning your computer on and off To turn on the computer, simply press and release the power button below the LCD screen. Please refer to the Quick Guide for the location of the power button. To turn the power off, do any of the following:

Use the Windows shutdown command: click Start then Click Shut Down. Use the power button. You can also put the computer in sleep mode by pressing the sleep hotkey

<Fn> + <F4>. Note: If you cannot power off the computer normally, press and hold the power button for more than four seconds to shut down the computer. If you turn off the computer and want to turn it on again, wait at least two seconds before powering up. Taking care of your computer Your computer will serve you well if you take care of it. Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator. Do not expose the computer to temperatures below 0 C (32 F) or above 50 C (122 F). Do not subject the computer to magnetic fields. Do not expose the computer to rain or moisture. Do not spill water or any liquid on the computer. Do not subject the computer to heavy shock or vibration. Do not expose the computer to dust or dirt. Never place objects on top of the computer. h s i l g n E xiv Do not slam the computer display when you close it. Never place the computer on uneven surfaces. Taking care of your AC adapter Here are some ways to take care of your AC adapter:

Do not connect the adapter to any other device. Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord and any cables away from foot traffic. When unplugging the power cord, do not pull on the cord itself but pull on the plug. The total ampere ratings of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating. Taking care of your battery pack Here are some ways to take care of your battery pack:

Use only batteries of the same kind as replacements. Turn the power off before removing or replacing batteries. Do not tamper with batteries. Keep them away from children. Dispose of used batteries according to local regulations. Recycle if possible. Cleaning and servicing When cleaning the computer, follow these steps:

1 Turn off the computer and remove the battery pack. 2 Disconnect the AC adapter. Use a soft, moist cloth. Do not use liquid or aerosol cleaners. 3 If either of the following occurs:

Please refer to "Frequently asked questions" on page 19. The computer has been dropped or the body has been damaged;

The computer does not operate normally s t n e t n o C Information for your safety and comfort Safety instructions Operating environment Medical devices Vehicles Potentially explosive environments Emergency calls Disposal instructions Mercury advisory ENERGY STAR Tips and information for comfortable use First things first Product Registration How to Register Another Option Your guides Basic care and tips for using your computer Turning your computer on and off Taking care of your computer Taking care of your AC adapter Taking care of your battery pack Cleaning and servicing Acer eRecovery Management Creating a recovery backup (Optical drive) Creating a recovery backup (USB flash drive) Recovering your system (Optical drive) To recover your system Types of recovery Recovering pre-installed software and drivers Returning to a previous system condition Returning your system to its factory condition Recovering your system (USB flash drive) To recover your system Types of recovery Recovering pre-installed software and drivers Returning to a previous system condition Returning your system to its factory condition Touchpad Touchpad basics (with two buttons) Using a computer security lock Using the keyboard Lock keys and embedded numeric keypad Windows keys iii iii vii vii viii viii viii ix ix ix x xii xii xii xii xii xiii xiii xiii xiv xiv xiv 1 2 4 6 6 6 6 7 8 10 10 10 10 11 12 14 14 15 16 16 17 Special keys (only for certain models) Frequently asked questions Requesting service Before you call Battery pack Battery pack characteristics Maximizing the batterys life Installing and removing the battery pack Charging the battery Checking the battery level Optimizing battery life Battery-low warning Taking your notebook PC with you Disconnecting from the desktop Moving around Preparing the computer What to bring to meetings Taking the computer home Preparing the computer What to take with you Special considerations Setting up a home office Traveling with the computer Preparing the computer What to take with you Special considerations Traveling internationally with the computer Preparing the computer What to take with you Special considerations Securing your computer Using a computer security lock Using passwords Entering passwords Setting passwords Expanding through options Connectivity options Built-in network feature Universal Serial Bus (USB) BIOS utility Boot sequence Enable disk-to-disk recovery Password Power management 18 19 21 21 22 22 22 23 23 24 24 24 26 26 26 26 27 27 27 27 27 28 28 28 28 28 28 29 29 29 29 29 30 31 31 32 32 32 33 33 33 33 34 34 Troubleshooting Troubleshooting tips Error messages Regulations and safety notices FCC notice LCD pixel statement Radio device regulatory notice General European Union (EU) The FCC RF safety requirement Canada Low-power license-exempt radio communication devices (RSS-210) LCD panel ergonomic specifications 35 35 35 36 36 37 37 37 38 38 40 40 1 Acer eRecovery Management If your computer experiences problems that are not recoverable by other methods, you may need to reinstall the Windows operating system and factory-loaded software and drivers. To ensure you can recover your computer when needed, you should create a recovery backup as soon as possible. E n g l i s h Note: The following content is for general reference only. Actual product specifications may vary. Acer eRecovery Management consists of the following functions:

1 Backup:

Create Factory Default Backup Create Drivers and Applications Backup Note: Models that do not have a built-in ODD will allow you to make backup copies to a USB drive or an external ODD. 2 Restore:

Restore Operating System to Factory Defaults Restore Operating System and Retain User Data Reinstall Drivers or Applications This chapter will guide you through each process. To use the password protection feature of Acer eRecovery Management, you must first set the password. The password is set by launching Acer eRecovery Management and clicking Settings. 2 h s i l g n E Creating a recovery backup (Optical drive) To reinstall using a backup on optical discs, you must create the recovery disc beforehand. Throughout the process, you will be guided by onscreen instructions. Please read them carefully!

1 Click Start > All Programs > Acer, then click Acer eRecovery Management. 2 To create recovery discs for the hard drives entire original contents, including Windows and all factory-loaded software and drivers, click Create Factory Default Backup.

- OR -

To create a recovery disc for only the factory-loaded software and drivers, click Create Drivers and Applications Backup. Important: We recommend that you create each type of recovery backup as soon as possible. The Create Factory Default Backup dialog box tells you the number of blank, recordable discs you will need to complete the recovery discs. Make sure that you have the required number of identical, blank discs ready before continuing. E n g l i s h 3 Note: The number of blank DVDs required varies depending on the operating system installed. 3 Insert a blank disc into the drive indicated in the Backup to list, then click Next. You will be shown the backup progress on the screen. The drive ejects each disc as it completes burning it. 4 Remove the disc from the drive and mark it with a permanent marker. Important: Write a unique, descriptive label on each disc, such as Windows Recovery Disc 1 of 2 or Apps/Drivers Recovery disc. Make sure you keep the discs in a safe place that you will remember. h s i l g n E 4 5 If multiple discs are required, insert a new disc when prompted, then click OK. Continue recording discs until the process is complete. Creating a recovery backup (USB flash drive) To reinstall using a backup on a USB flash drive, you must create the recovery backup beforehand. Throughout the process, you will be guided by onscreen instructions. Please read them carefully!

Important: If you are using a USB flash drive, ensure it is at least 12 GB and does not contain any previous data. 1 Click Start > All Programs > Acer, then click Acer eRecovery Management. 2 To create recovery backup for the hard drives entire original contents, including Windows and all factory-loaded software and drivers, click Create Factory Default Backup.

- OR -

To create a recovery backup for only the factory-loaded software and drivers, click Create Driver and Applications Backup. Important: We recommend that you create each type of recovery backup as soon as possible. The Create Factory Default Backup dialog box opens. This dialog box tells you the estimated size of the backup file on your USB flash drive. E n g l i s h 5 3 Plug in the USB disk, then click Start. You will be shown the backup progress on the screen. 4 Unplug the USB flash drive and mark it with a permanent marker. Important: Write a unique, descriptive label on each backup, such as Windows Recovery Backup or Apps/Drivers Recovery Backup. Make sure you keep the USB flash drive in a safe place that you will remember. 6 h s i l g n E Recovering your system (Optical drive) If calling Acer support did not help fix your problem, you can use the Acer eRecovery Management program. This will restore your computer to the same state as when you purchased it, while giving you an option to retain all settings and personal data for later retrieval. Perform minor fixes. To recover your system 1 If only one or two items of software or hardware have stopped working correctly, the problem may be solved by reinstalling the software or the device drivers. To recover software and drivers that were pre-installed at the factory, see "Recovering pre-installed software and drivers" on page 6. For instructions on reinstalling software and drivers that were not pre-installed, see that products documentation or technical support Web site. 2 If reinstalling software or drivers does not help, then the problem may be solved by returning your system to a previous state when everything was working correctly. For instructions, see "Returning to a previous system condition" on page 7. 3 If nothing else has solved the problem and you want to reset your system to factory condition, see "Returning your system to its factory condition" on page 8. Reset your system to its factory condition. Revert to a previous system condition. Types of recovery Recovering pre-installed software and drivers As a troubleshooting step, you may need to reinstall the software and device drivers that came pre-installed on your computer from the factory. You can recover using either your hard drive or the recovery discs you have created. New software: If you need to recover software that did not come pre-installed on your computer, you need to follow that softwares installation instructions. New device drivers: If you need to recover device drivers that did not come pre-installed on your computer, follow the instructions provided with the device. Click Start > All Programs > Acer, then click Acer eRecovery Management. To recover your pre-installed software and drivers:

1

- OR -

If you are recovering from your driver and application recovery disc, insert it into the disc drive, then go to Step 3 after the Acer Application Recovery main menu opens. 2 Click the Restore tab, then click Reinstall Drivers or Applications to display the Acer Application Recovery main menu. E n g l i s h 7 3 4 Click Contents to show a list of software and device drivers. Click the install icon for the item you want to install, then follow the onscreen prompts to complete the installation. Repeat this step for each item you want to reinstall. Returning to a previous system condition Microsoft System Restore periodically takes snapshots of your system settings and saves them as restore points. In most cases of hard-to-resolve software problems, you can return to one of these restore points to get your system running again. Windows automatically creates an additional restore point each day, and also each time you install software or device drivers. Tip: For more information about using Microsoft System Restore, click Start, then click Help and Support. Type windows system restore in the Search Help box, then press Enter. To return to a restore point:

1 Click Start > Control Panel > System and Security > Action Center, then click Recovery. Click Open System Restore, then Next. Select the restore point you want, click Next, then Finish. A confirmation message box will appear. Click Yes. Your system is restored using the restore point you specified. This process may take several minutes, and may restart your computer. 2 3 4 8 h s i l g n E Returning your system to its factory condition If your computer experiences problems that are not recoverable by other methods, you may need to reinstall everything to return your system to its factory condition. You can reinstall using either your hard drive or the recovery discs you have created. Warning: This complete recovery deletes everything on your hard drive, then reinstalls Windows and all software and drivers that were pre-installed on your system. If you can access important files on your hard drive, back them up now. If you can still run Windows, see "Recovering from within Windows" on page 8. If you cannot run Windows and your original hard drive is still working, see

"Recovering from the hard drive during startup" on page 8. If you cannot run Windows and your original hard drive has been completely re-

formatted or you have installed a replacement hard drive, see "Recovering from your recovery discs" on page 9. Recovering from within Windows To reinstall Windows and all pre-installed software and drivers:

Click Start > All Programs > Acer, then click Acer eRecovery Management. Click the Restore tab, then Restore Operating System to Factory Defaults. Click Yes, then Start. A dialog box will display information about the hard drive that the operating system will be recovered to. Warning: Continuing the process will erase all files on your hard drive. Click OK. The recovery process begins by restarting your computer, then continues by copying files to your hard drive. This process may take a while, the Acer eRecovery Management screen displays the progress. When the recovery has finished, a dialog box will prompt you to restart your computer. Click OK to restart your computer. Follow the onscreen prompts for first-time system setup. Recovering from the hard drive during startup To reinstall Windows and all pre-installed software and drivers:

1 Turn on your computer, then press <Alt> + <F10> during startup to open Acer eRecovery Management. Click Restore Operating System to Factory Defaults. 2 9 E n g l i s h Warning: Continuing the process will erase all files on your hard drive. 3 Click Next. Your hard drives original, factory-loaded contents will be recovered. This process will take several minutes. Recovering from your recovery discs To reinstall Windows and all pre-installed software and drivers:

1 Turn on your computer, insert the first system recovery disc into your optical disc drive, then restart your computer. Warning: Continuing the process will erase all files on your hard drive. If it is not already enabled, you must enable the F12 Boot Menu:

Press <F2> when starting your computer. Use the left or right arrow keys to select the Main menu. Press the down key until F12 Boot Menu is selected, press <F5> to change this setting to Enabled. Use the left or right arrow keys to select the Exit menu. Select Save Changes and Exit and press Enter. Select OK to confirm. Your computer will restart. 2 During startup, press <F12> to open the boot menu. The boot menu allows you to select which device to start from, such as the hard drive or an optical disc. Use your arrow keys to select the line CDROM/DVD (this line may start with IDE 1...), then press <Enter>. Windows will install from the recovery disc you inserted. Insert the second recovery disc when prompted, then follow the onscreen prompts to complete the recovery. 3 4 10 h s i l g n E Recovering your system (USB flash drive) If calling Acer support did not help fix your problem, you can use the Acer eRecovery Management program. This will restore your computer to the same state as when you purchased it, while giving you an option to retain all settings and personal data for later retrieval. Perform minor fixes. To recover your system 1 If only one or two items of software or hardware have stopped working correctly, the problem may be solved by reinstalling the software or the device drivers. To recover software and drivers that were pre-installed at the factory, see "Recovering pre-installed software and drivers" on page 10. For instructions on reinstalling software and drivers that were not pre-installed, see that products documentation or technical support Web site. 2 If reinstalling software or drivers does not help, then the problem may be solved by returning your system to a previous state when everything was working correctly. For instructions, see "Returning to a previous system condition" on page 11. 3 If nothing else has solved the problem and you want to reset your system to factory condition, see "Returning your system to its factory condition" on page 12. Reset your system to its factory condition. Revert to a previous system condition. Types of recovery Recovering pre-installed software and drivers As a troubleshooting step, you may need to reinstall the software and device drivers that came pre-installed on your computer from the factory. You can recover using either your hard drive or the backup you have created. New software: If you need to recover software that did not come pre-installed on your computer, you need to follow that softwares installation instructions. New device drivers: If you need to recover device drivers that did not come pre-installed on your computer, follow the instructions provided with the device. To recover your pre-installed software and drivers:

1

- OR -

Click Start > All Programs > Acer, then click Acer eRecovery Management. If you are recovering from your driver and application recovery backup, insert the USB flash drive into a USB port. Open the USB flash drive in Windows Explorer and double-click Recovery. 2 Click Reinstall Drivers or Application from a USB device. E n g l i s h 11 3 4 Click Contents to show a list of software and device drivers. Click the install icon for the item you want to install, then follow the onscreen prompts to complete the installation. Repeat this step for each item you want to reinstall. Returning to a previous system condition Microsoft System Restore periodically takes snapshots of your system settings and saves them as restore points. In most cases of hard-to-resolve software problems, you can return to one of these restore points to get your system running again. Windows automatically creates an additional restore point each day, and also each time you install software or device drivers. Tip: For more information about using Microsoft System Restore, click Start, then click Help and Support. Type windows system restore in the Search Help box, then press Enter. To return to a restore point:

1 Click Start > Control Panel > System and Security > Action Center, then click Recovery. Click Open System Restore, then Next. Select the restore point you want, click Next, then Finish. A confirmation message box will appear. Click Yes. Your system is restored using the restore point you specified. This process may take several minutes, and may restart your computer. 2 3 4 12 h s i l g n E Returning your system to its factory condition If your computer experiences problems that are not recoverable by other methods, you may need to reinstall everything to return your system to its factory condition. You can reinstall using either your hard drive or the recovery backup you have created. Warning: This complete recovery deletes everything on your hard drive, then reinstalls Windows and all software and drivers that were pre-installed on your system. If you can access important files on your hard drive, back them up now. If you can still run Windows, see "Recovering from within Windows" on page 12. If you cannot run Windows and your original hard drive is still working, see

"Recovering from the hard drive during startup" on page 12. If you cannot run Windows and your original hard drive has been completely re-

formatted or you have installed a replacement hard drive, see "Recovering from your recovery backup" on page 13. Recovering from within Windows To reinstall Windows and all pre-installed software and drivers:

Click Start > All Programs > Acer, then click Acer eRecovery Management. Click the Restore tab, then Restore Operating System to Factory Defaults to open the Confirm Restoration dialog box. Click Yes, then Start. A dialog box will display information about the hard drive that the operating system will be recovered to. Warning: Continuing the process will erase all files on your hard drive. Click OK. The recovery process begins by restarting your computer, then continues by copying files to your hard drive. This process may take a while, the Acer eRecovery Management screen displays the progress. When the recovery has finished, a dialog box prompts you to restart your computer. Click OK to restart your computer. Follow the onscreen prompts for first-time system setup. Recovering from the hard drive during startup To reinstall Windows and all pre-installed software and drivers:

1 Turn on your computer, then press <Alt> + <F10> during startup to open Acer eRecovery Management. Click Restore Operating System to Factory Defaults. 2 13 Warning: Continuing the process will erase all files on your hard drive. E n g l i s h 3 Click Next. Your hard drives original, factory-loaded contents will be recovered. This process will take several minutes. Recovering from your recovery backup To reinstall Windows and all pre-installed software and drivers:

1 Plug in the USB flash drive and turn on your computer. Warning: Continuing the process will erase all files on your hard drive. If it is not already enabled, you must enable the F12 Boot Menu:

Press <F2> when starting your computer. Use the left or right arrow keys to select the Main menu. Press the down key until F12 Boot Menu is selected, press <F5> to change this setting to Enabled. Use the left or right arrow keys to select the Exit menu. Select Save Changes and Exit and press Enter. Select OK to confirm. Your computer will restart. 2 During startup, press <F12> to open the boot menu. The boot menu allows you to select which device to start from, such as a flash drive. Use your arrow keys to select the line USB HDD, then press <Enter>. Windows will install from the recovery backup on the USB flash drive. Follow the onscreen prompts to complete the recovery. 3 4 h s i l g n E 14 Touchpad The built-in touchpad is a pointing device that senses movement on its surface. This means the cursor responds as you move your finger across the surface of the touchpad. The central location on the palmrest provides optimum comfort and support. Touchpad basics (with two buttons) 1 2 3 The following items show you how to use the touchpad with two buttons. Move your finger across the touchpad to move the cursor. Press the left and right buttons located beneath the touchpad to perform selection and execution functions. These two buttons are similar to the left and right buttons on a mouse. Tapping on the touchpad is the same as clicking the left button. Function Execute Left button (2) Quickly click twice. Select Drag Click once. Click and hold, then use finger on the touchpad to drag the cursor. Right button (3) Main touchpad (1) Tap twice (at the same speed as double-clicking a mouse button). Tap once. Tap twice (at the same speed as double-clicking a mouse button); rest your finger on the touchpad on the second tap and drag the cursor. Access context menu Click once. Note: Illustrations for reference only. The exact configuration of your PC depends on the model purchased. 15 Note: When using the touchpad, keep it and your fingers dry and clean. The touchpad is sensitive to finger movement; hence, the lighter the touch, the better the response. Tapping harder will not increase the touchpad's responsiveness. E n g l i s h Note: By default, vertical and horizontal scrolling is enabled on your touchpad. It can be disabled under Mouse settings in Windows Control Panel. Using a computer security lock The notebook comes with a Kensington-compatible security slot for a security lock. Wrap the computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available. h s i l g n E 16 Using the keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor, lock, Windows, function and special keys. Lock keys and embedded numeric keypad The keyboard has three lock keys which you can toggle on and off. Lock key Description Caps Lock When Caps Lock is on, all alphabetic characters typed are in uppercase. Num Lock

<Fn> + <F11>

When Num Lock is on, the embedded keypad is in numeric mode. The keys function as a calculator (complete with the arithmetic operators +, -, *, and /). Use this mode when you need to do a lot of numeric data entry. A better solution would be to connect an external keypad. Note: <Fn> + <F11> only for certain models. Scroll Lock

<Fn> + <F12>

When Scroll Lock is on, the screen moves one line up or down when you press the up or down arrow keys respectively. Scroll Lock does not work with some applications. The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right corner of the keycaps. To simplify the keyboard legend, cursor-control key symbols are not printed on the keys. Desired access Num Lock on Num Lock off Number keys on embedded keypad Type numbers in a normal manner. Cursor-control keys on embedded keypad Main keyboard keys Hold <Shift> while using cursor-control keys. Hold <Fn> while using cursor-control keys. Hold <Fn> while typing letters on embedded keypad. Type the letters in a normal manner. Windows keys The keyboard has two keys that perform Windows-specific functions. Key Description 17 E n g l i s h Windows key

> + <M>: Minimizes all windows

> + <R>: Open the Run dialog box

> + <T>: Cycle through programs on the taskbar

> + <U>: Open Ease of Access Center

> + <X>: Open Windows Mobility Center

> + <Break>: Display the System Properties dialog

> : Open or close the Start menu

> + <D>: Display the desktop

> + <E>: Open Windows Explorer

> + <F>: Search for a file or folder

> + <G>: Cycle through Sidebar gadgets

> + <L>: Lock your computer (if you are connected Pressed alone it launches the Start menu. It can also be used with other keys for other functions:

to a network domain), or switch users (if you're not connected to a network domain)

box

desktop

by using Windows Flip 3-D

select Windows Sidebar

<CTRL> + <

on a network)

<CTRL> + <

> + <Tab>: Use the arrow keys to cycle through programs on the taskbar by using Windows Flip 3-D

> + <Tab>: Cycle through programs on the taskbar

> + <Shift+M>: Restore minimized windows to the

> + <SPACEBAR>: Bring all gadgets to the front and

> + <F>: Search for computers (if you are Note: Depending on your edition of Windows, some shortcuts may not function as described. Application key This key has the same effect as clicking the right mouse button; it opens the application's context menu. 18 h s i l g n E Special keys (only for certain models) You can locate the Euro symbol and the US dollar sign at the upper-center of your keyboard. The Euro symbol 1 2 Open a text editor or word processor. Hold <Alt Gr> and then press the <5> key at the upper-center of the keyboard. Note: Some fonts and software do not support the Euro symbol. Please refer to www.microsoft.com/typography/faq/faq12.htm for more information. The US dollar sign 1 2 Open a text editor or word processor. Hold <Shift> and then press the <4> key at the upper-center of the keyboard. Note: This function varies according to the language settings. Frequently asked questions The following is a list of possible situations that may arise during the use of your computer. Easy solutions are provided for each one. E n g l i s h 19 I turned the power on, but the computer does not start or boot up. Look at the power indicator:

If it is not lit, no power is being supplied to the computer. Check the following:

If you are using on the battery, it may be low and unable to power the computer. Connect the AC adapter to recharge the battery pack. Make sure that the AC adapter is properly plugged into the computer and to the power outlet. If it is lit, check the following:

Is a non-bootable (non-system) disk in the external USB floppy drive?

Remove or replace it with a system disk and press <Ctrl> + <Alt> +

<Del> to restart the system. Nothing appears on the screen. The computers power management system automatically blanks the screen to save power. Press any key to turn the display back on. If pressing a key does not turn the display back on, three things might be the cause:

The brightness level might be too low. Press <Fn> + < > (increase) to adjust the brightness level. The display device might be set to an external monitor. Press the display toggle hotkey <Fn> + <F5> to toggle the display back to the computer. If the Sleep indicator is lit, the computer is in Sleep mode. Press and release the power button to resume. No audio is heard from the computer. Check the following:

The volume may be muted. In Windows, look at the volume control (speaker) icon on the taskbar. If it is crossed-out, click the icon and deselect the Mute all option. The volume level may be too low. In Windows, look at the volume control icon on the taskbar. You can also use the volume control buttons to adjust the volume. If headphones, earphones or external speakers are connected to the line-out port on the computer, the internal speakers automatically turn off. 20 h s i l g n E The keyboard does not respond. Try attaching an external keyboard to a USB port on the computer. If it works, contact your dealer or an authorized service center as the internal keyboard cable may be loose. The printer does not work. Check the following:

Make sure that the printer is connected to a power outlet and that it is turned on. Make sure that the printer cable is connected securely to a USB port and the corresponding port on the printer. I want to restore my computer to its original settings without recovery CDs. Note: D2D Recovery is only available in notebook models fitted with a hard drive. Note: If your system is the multilingual version, the operating system and language you choose when you first turn on the system will be the only option for future recovery operations. This recovery process helps you restore the C: drive with the original software content that is installed when you purchase your notebook. Follow the steps below to rebuild your C: drive. (Your C: drive will be reformatted and all data will be erased.) It is important to back up all data files before using this option. Before performing a restore operation, please check the BIOS settings by pressing

<F2> during POST. Check to see if Acer disk-to-disk recovery is enabled or not. Exit the BIOS utility and save changes. The system will reboot. 1 2 Make sure the D2D Recovery setting in Main is Enabled. 3 To start the recovery process:

1 2 While the Acer logo is showing, press <Alt> + <F10> at the same time to enter Restart the system. the recovery process. Refer to the onscreen instructions to perform system recovery. 3 Important! This feature occupies 6 GB in a hidden partition on your hard disk. Requesting service Before you call 21 E n g l i s h Please have the following information available when you call Acer for online service, and please be at your computer when you call. With your support, we can reduce the amount of time a call takes and help solve your problems efficiently. If there are error messages or beeps reported by your computer, write them down as they appear on the screen (or the number and sequence in the case of beeps). You are required to provide the following information:

Name: ___________________________________________________________________ Address: _________________________________________________________________ Telephone number: ________________________________________________________ Machine and model type: ___________________________________________________ Serial number: ____________________________________________________________ Date of purchase: _________________________________________________________ h s i l g n E 22 Battery pack The computer uses a battery pack that gives you long use between charges. Employs current battery technology standards. Delivers a battery-low warning. Battery pack characteristics The battery pack has the following characteristics:

The battery is recharged whenever you connect the computer to the AC adapter. Your computer supports charge-in-use, enabling you to recharge the battery while you continue to operate the computer. However, recharging with the computer turned off results in a significantly faster charge time. The battery will come in handy when you travel or during a power failure. It is advisable to have an extra fully charged battery pack available as backup. Contact your dealer for details on ordering a spare battery pack. Maximizing the batterys life Like all other batteries, your computer's battery will degrade over time. This means that the battery's performance will diminish with time and use. To maximize your battery's life, you are advised to adhere to the recommendations set out below. Conditioning a new battery pack Before you use a battery pack for the first time, there is a conditioning process that you should follow:

1 2 3 4 5 Insert the new battery without turning the computer on. Connect the AC adapter and fully charge the battery. Disconnect the AC adapter. Turn on the computer and operate using battery power. Fully deplete the battery until the battery-low warning appears. Reconnect the AC adapter and fully charge the battery again. 6 Follow these steps again until the battery has been charged and discharged three times. Use this conditioning process for all new batteries, or if a battery hasn't been used for a long time. If the computer is to be stored for more than two weeks, you are advised to remove the battery pack from the unit. Warning: Do not expose battery packs to temperatures below 0 C (32 F) or above 45 C (113 F). Extreme temperatures may adversely affect the battery pack. E n g l i s h 23 By following the battery conditioning process you condition your battery to accept the maximum possible charge. Failure to follow this procedure will prevent you from obtaining the maximum battery charge, and will also shorten the effective lifespan of the battery. In addition, the useful lifespan of the battery is adversely affected by the following usage patterns:

Using the computer on constant AC power with the battery inserted. If you want to use constant AC power, you are advised to remove the battery pack after it is fully charged. Not discharging and recharging the battery to its extremes, as described above. Frequent use; the more you use the battery, the faster it will reach the end of its effective life. A standard computer battery has a life span of about 300 charges. Installing and removing the battery pack Important! Before removing the battery from the unit, connect the AC adapter if you want to continue using your computer. Otherwise, turn off the computer first. To install a battery pack:

1 2 Align the battery with the open battery bay; make sure that the end with the contacts will enter first, and that the top surface of the battery is facing up. Slide the battery into the battery bay and gently push until the battery locks in place. To remove a battery pack:

1 2 Slide the battery release latch to release the battery. Pull the battery from the battery bay. Charging the battery To charge the battery, first make sure that it is correctly installed in the battery bay. Plug the AC adapter into the computer, and connect to a mains power outlet. You can continue to operate your computer on AC power while your battery is charging. However, charging the battery with the computer turned off results in a significantly faster charge time. Note: You are advised to charge the battery before retiring for the day. Charging the battery overnight before traveling enables you to start the next day with a fully charged battery. 24 h s i l g n E Checking the battery level The Windows power meter indicates the current battery level. Rest the cursor over the battery/power icon on the taskbar to see the battery's present charge level. Optimizing battery life Optimizing battery life helps you get the most out of battery operation, prolonging the charge/recharge cycle and improving recharging efficiency. You are advised to follow the suggestions set out below:

Purchase an extra battery pack. Use AC power whenever possible, reserving battery for on-the-go use. Eject a PC Card if it is not being used, as it will continue to draw power (for selected models). Store the battery pack in a cool, dry place. The recommended temperature is 10 C (50 F) to 30 C (86 F). Higher temperatures cause the battery to self-

discharge faster. Excessive recharging decreases the battery life. Look after your AC adapter and battery. Battery-low warning When using battery power pay attention to the Windows power meter. Warning: Connect the AC adapter as soon as possible after the battery-low warning appears. Data will be lost if the battery to become fully depleted and the computer shuts down. When the battery-low warning appears, the recommended course of action depends on your situation:

Situation Recommended Action The AC adapter and a power outlet are available. 1. Plug the AC adapter into the computer, and then connect to the mains power supply. 2. Save all necessary files. 3. Resume work. Turn off the computer if you want to recharge the battery rapidly. 25 E n g l i s h Situation Recommended Action An extra fully charged battery pack is available. 1. Save all necessary files. 2. Close all applications. 3. Turn off the computer. 4. Replace the battery pack. 5. Turn on the computer and resume work. The AC adapter or a power outlet is unavailable. You have no spare battery pack. 1. Save all necessary files. 2. Close all applications. 3. Turn off the computer. 26 h s i l g n E Taking your notebook PC with you This section gives you tips and hints to consider when moving around or traveling with your computer. Disconnecting from the desktop Follow these steps to disconnect your computer from external accessories:

1 2 3 4 5 6 7 Save any open files. Remove any media, floppy disks or compact disks from the drive(s). Shut down the computer. Close the display cover. Disconnect the cord from the AC adapter. Disconnect the keyboard, pointing device, printer, external monitor and other external devices. Disconnect the Kensington lock if you are using one to secure the computer. Moving around When you are just moving within short distances, for example, from your office desk to a meeting room. Preparing the computer Before moving the computer, close and latch the display cover to place it in Sleep mode. You can now safely take the computer anywhere you go within the building. To bring the computer out of Sleep mode, open the display; then press and release the power button. If you are taking the computer to a client's office or a different building, you may choose to shut down the computer:

Click Start then click Shut Down. Or:

You can put the computer in Sleep mode by pressing <Fn> + <F4>. Then close and latch the display. When you are ready to use the computer again, unlatch and open the display; then press and release the power button. Note: If the Sleep indicator is off, the computer has entered Hibernation mode and is turned off. If the power indicator is off but the Sleep indicator is on, the computer has entered Sleep mode. In both cases, press and release the power button to turn the computer 27 back on. Note that the computer may enter Hibernation mode after being in Sleep mode for a period of time. What to bring to meetings If your meeting is relatively short, you probably do not need to bring anything with you other than your computer. If your meeting will be longer, or if your battery is not fully charged, you may want to bring the AC adapter with you to plug in your computer in the meeting room. If the meeting room does not have an electrical outlet, reduce the drain on the battery by putting the computer in Sleep mode. Press <Fn> + <F4> or close the display cover whenever you are not actively using the computer. To resume, open the display (if closed), then press and release the power button. E n g l i s h Taking the computer home When you are moving from your office to your home or vice versa. Preparing the computer After disconnecting the computer from your desktop, follow these steps to prepare the computer for the trip home:

Check that you have removed all media and compact discs from the drive(s). Failure to remove the media can damage the drive head. Pack the computer in a protective case that can prevent the computer from sliding around and cushion it if it should fall. Caution: Avoid packing items next to the top cover of the computer. Pressure against the top cover can damage the screen. What to take with you Unless you have some items at home, take the following items with you:

AC adapter and power cord. The printed Users Guide. Special considerations Follow these guidelines to protect your computer while traveling to and from work:

Minimize the effects of temperature changes by keeping the computer with you. If you need to stop for an extended period of time and cannot carry the computer with you, leave the computer in the trunk of the car to avoid exposing the computer to excessive heat. Changes in temperature and humidity can cause condensation. Allow the 28 h s i l g n E computer to return to room temperature, and inspect the screen for condensation before turning on the computer. If the temperature change is greater than 10 C (18 F), allow the computer to come to room temperature slowly. If possible, leave the computer for 30 minutes in an environment with a temperature between outside and room temperature. Setting up a home office If you frequently work on your computer at home, you may want to purchase a second AC adapter for use at home. With a second AC adapter, you can avoid carrying the extra weight to and from home. If you use your computer at home for significant periods of time, you might also want to add an external keyboard, monitor or mouse. Traveling with the computer When you are moving within a larger distance, for instance, from your office building to a client's office building or traveling locally. Preparing the computer Prepare the computer as if you were taking it home. Make sure that the battery in the computer is charged. Airport security may require you to turn on your computer when carrying it into the gate area. What to take with you Take the following items with you:

AC adapter Spare, fully-charged battery pack(s) Additional printer driver files if you plan to use another printer Special considerations In addition to the guidelines for taking the computer home, follow these guidelines to protect your computer while traveling:

Always take the computer as carry-on luggage. If possible, have the computer inspected by hand. Airport security X-ray machines are safe, but do not put the computer through a metal detector. Avoid exposing floppy disks to hand-held metal detectors. Traveling internationally with the computer When you are moving from country to country. 29 E n g l i s h Preparing the computer Prepare the computer as you would normally prepare it for traveling. What to take with you Take the following items with you:

AC adapter Power cords that are appropriate for the country to which you are traveling Spare, fully-charged battery packs Additional printer driver files if you plan to use another printer Proof of purchase, in case you need to show it to customs officials International Travelers Warranty passport Special considerations Follow the same special considerations as when traveling with the computer. In addition, these tips are useful when traveling internationally:

When traveling in another country, check that the local AC voltage and the AC adapter power cord specifications are compatible. If not, purchase a power cord that is compatible with the local AC voltage. Do not use converter kits sold for appliances to power the computer. If you are using the modem, check if the modem and connector are compatible with the telecommunications system of the country you are traveling in. Securing your computer Your computer is a valuable investment that you need to take care of. Learn how to protect and take care of your computer. Security features include hardware and software locks a security notch and passwords. Using a computer security lock The notebook comes with a Kensington-compatible security slot for a security lock. Wrap a computer security lock cable around an immovable object such as a table or handle of a locked drawer. Insert the lock into the notch and turn the key to secure the lock. Some keyless models are also available. 30 h s i l g n E Using passwords Passwords protect your computer from unauthorized access. Setting these passwords creates several different levels of protection for your computer and data:

Supervisor Password prevents unauthorized entry into the BIOS utility. Once set, you must enter this password to gain access to the BIOS utility. See

"BIOS utility" on page 33. User Password secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from Hibernation for maximum security. Password on Boot secures your computer against unauthorized use. Combine the use of this password with password checkpoints on boot-up and resume from Hibernation for maximum security. Important! Do not forget your Supervisor Password! If you forget your password, please get in touch with your dealer or an authorized service center. 31 Entering passwords When a password is set, a password prompt appears in the center of the display screen. When the Supervisor Password is set, a prompt appears when you press <F2>

to enter the BIOS utility at boot-up. Type the Supervisor Password and press <Enter> to access the BIOS utility. If you enter the password incorrectly, a warning message appears. Try again and press <Enter>. When the User Password is set and the password on boot parameter is enabled, a prompt appears at boot-up. Type the User Password and press <Enter> to use the computer. If you enter the password incorrectly, a warning message appears. Try again and press

<Enter>. E n g l i s h Important! You have three chances to enter a password. If you fail to enter the password correctly after three tries, the system halts. Press and hold the power button for four seconds to shut down the computer. Then turn on the computer again, and try again. Setting passwords You can set passwords using the BIOS utility. 32 h s i l g n E Expanding through options Your notebook PC offers you a complete mobile computing experience. Connectivity options Ports allow you to connect peripheral devices to your computer as you would with a desktop PC. For instructions on how to connect different external devices to the computer, read the following section. Built-in network feature The built-in network feature allows you to connect your computer to an Ethernet-

based network. To use the network feature, connect an Ethernet cable from the Ethernet (RJ-45) port on the chassis of the computer to a network jack or hub on your network. Universal Serial Bus (USB) The USB 2.0 port is a high-speed serial bus which allows you to connect USB peripherals without taking up precious system resources. 33 E n g l i s h BIOS utility The BIOS utility is a hardware configuration program built into your computer's BIOS. Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run it. To activate the BIOS utility, press <F2> during the POST while the notebook PC logo is being displayed. Boot sequence To set the boot sequence in the BIOS utility, activate the BIOS utility, then select Boot from the categories listed at the top of the screen. Enable disk-to-disk recovery To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility, then select Main from the categories listed at the top of the screen. Find D2D Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this value to Enabled. 34 h s i l g n E Password To set a password on boot, activate the BIOS utility, then select Security from the categories listed at the top of the screen. Find Password on boot: and use the

<F5> and <F6> keys to enable this feature. Power management This computer has a built-in power management unit that monitors system activity. System activity refers to any activity involving one or more of the following devices:

keyboard, mouse, hard disk, peripherals connected to the computer, and video memory. If no activity is detected for a period of time (called an inactivity timeout), the computer stops some or all of these devices in order to conserve energy. This computer employs a power management scheme that supports the advanced configuration and power interface (ACPI), which allows for maximum power conservation and maximum performance at the same time. Windows handles all power-saving chores for your computer. E n g l i s h 35 Troubleshooting This chapter shows you how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the computer. Do not attempt to open the computer yourself; contact your dealer or authorized service center for assistance. Troubleshooting tips This notebook PC incorporates an advanced design that delivers onscreen error message reports to help you solve problems. If the system reports an error message or an error symptom occurs, see "Error messages" below. If the problem cannot be resolved, contact your dealer. See

"Requesting service" on page 21. Error messages If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action. Error messages Corrective action CMOS battery bad Contact your dealer or an authorized service center. CMOS checksum error Contact your dealer or an authorized service center. Disk boot failure Insert a system (bootable) disk, then press <Enter> to reboot. Equipment configuration error Press <F2> (during POST) to enter the BIOS utility, then press Exit in the BIOS utility to reboot. Hard disk 0 error Contact your dealer or an authorized service center. Hard disk 0 extended type error Contact your dealer or an authorized service center. I/O parity error Contact your dealer or an authorized service center. Keyboard error or no keyboard connected Contact your dealer or an authorized service center. Keyboard interface error Contact your dealer or an authorized service center. Memory size mismatch Press <F2> (during POST) to enter the BIOS utility, then press Exit in the BIOS utility to reboot. If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. h s i l g n E 36 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-

certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this computer. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 37 E n g l i s h Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque l'intention des utilisateurs canadiens Cet appareil numrique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Hereby, Acer, declares that this notebook PC series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. Radio device regulatory notice Note: Below regulatory information is for models with wireless LAN and / or Bluetooth only. General To prevent radio interference to the licensed service, this device is intended to be operated indoors. This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Below information is for products with such devices. h s i l g n E European Union (EU) R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:

38 EN62311 EN60950-1 EN301 489-7 EN301 489-1 EN301 489-17 Article 3.1(a) Health and Safety Article 3.1(b) EMC Article 3.2 Spectrum Usages EN301 489-24 EN301 908-1 EN301 908-2 EN300 328 EN301 511 EN301 489-3 (Applicable to non-bluetooth wireless keyboard mouse set) EN300 440-2 (Applicable to non-bluetooth wireless keyboard mouse set) EN301 893 (Applicable to 5 GHz high performance RLAN) List of applicable countries EU member states as of July 2009 are: Belgium, Denmark, Germany, Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United Kingdom, Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic, Slovenia, Cyprus, Malta, Bulgaria and Romania. Usage is allowed in the countries of European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact local office in the country of use. Please see ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. The FCC RF safety requirement The radiated output power of the wireless LAN Mini PCI Card and Bluetooth card is far below the FCC radio frequency exposure limits. Nevertheless, the notebook PC series shall be used in such a manner that the potential for human contact during normal operation is minimized as follows:

1 Users are requested to follow the RF safety instructions on wireless option devices that are included in the user's manual of each RF option device. E n g l i s h 39 Caution: To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm (8 inches) must be maintained between the antenna for the integrated wireless LAN Mini PCI Card built in to the screen section and all persons. Auxiliary Main 2 0 c m 20c m Note: The wireless Mini PCI adapter implements a transmission diversity function. The function does not emit radio frequencies simultaneously from both antennas. One of the antennas is selected automatically or manually (by users) to ensure good quality radiocommunication. 2 An improper installation or unauthorized use may cause harmful interference to radio communications. Also any tampering of the internal antenna will void the FCC certification and your warranty. 40 h s i l g n E Canada Low-power license-exempt radio communication devices (RSS-210) a b Common information Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. LCD panel ergonomic specifications Design viewing distance Design inclination angle Design azimuth angle Viewing direction range class Screen tilt angle Design screen illuminance 500 mm 0.0 90.0 Class IV 85.0 Reflection class of LCD panel

(positive and negative polarity) Image polarity Reference white:

Pre-setting of luminance and color temperature @ 6500K

(tested under BM7) Pixel fault class Both Yn u'n v'n Class II Illuminance level:

[250 + (250cos)] lx where = 85 Color: Source D65 Ordinary LCD: Class I Protective or Acer LCD: Class III

Aspire One Series Quick Guide 2011 All Rights Reserved. Aspire One Series Quick Guide Original Issue: 06/2011 Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ 3 First things first We would like to thank you for making an Acer notebook your choice for meeting your mobile computing needs. Your guides To help you use your Acer notebook, we have designed a set of guides:

First off, the setup poster helps you get started with setting up your computer. The Aspire One Generic User Guide contains useful information applying to all models in the Aspire product series. It covers basic topics such as using the keyboard and audio, etc. Please understand that due to its nature, the Generic User Guide will occasionally refer to functions or features which are only contained in certain models of the series, but not necessarily in the model you purchased. Such instances are marked in the text with language such as "only for certain models". The Quick Guide introduces you to the basic features and functions of your new computer. For more on how your computer can help you to be more productive, please refer to the Aspire One Generic User Guide. This guide contains detailed information on such subjects as system utilities, data recovery, expansion options and troubleshooting. In addition it contains warranty information and the general regulations and safety notices for your notebook. It is available in Portable Document Format (PDF) and comes preloaded on your notebook. Follow these steps to access it:

1 Click on 2 Click on A cerSystem User Guide. Start > All Programs > AcerSystem. Note: Viewing the file requires Adobe Reader. If Adobe Reader is not installed on your computer, clicking on AcerSystem User Guide will run the Adobe Reader setup program first. Follow the instructions on the screen to complete the installation. For instructions on how to use Adobe Reader, access the Help and Support menu. 4 h s i l g n E Your Acer notebook tour After setting up your computer as illustrated in the setup poster, let us show you around your new Acer notebook. Top view 1 2 3 4 5 6 9 8 7

1 Icon Item Description Integrated webcam Web camera for video communication

(configuration may vary by model). E n g l i s h 5

2 3 4 5 6 7 8 9 Icon Item Description Display screen Also called Liquid-Crystal Display (LCD), displays computer output (configuration may vary by model). Power button Turns the computer on and off. Keyboard Touchpad Status indicators1 For entering data into your computer. Touch-sensitive pointing device which functions like a computer mouse. Light-Emitting Diodes (LED) that light up to show the status of the computer's functions and components. Click buttons (left and right) The left and right buttons function like the left and right mouse buttons. Palmrest Comfortable support area for your hands when you use the computer. Microphone Internal microphone for sound recording. 1. The front panel indicators are visible even when the computer cover is closed. Hotkeys The computer employs hotkeys or key combinations to access most of the computer's controls like screen brightness and volume output. To activate hotkeys, press and hold the <Fn> key before pressing the other key in the hotkey combination. Hotkey Icon Function

<Fn> + <F3>

Communication Description Enables/disables the computers communication devices.

(Communication devices may vary by configuration.)

<Fn> + <F4>

Sleep Puts the computer in Sleep mode.

<Fn> + <F5>

Display toggle

<Fn> + <F6>

Screen blank

<Fn> + <F7>

Touchpad toggle Switches display output between the display screen, external monitor

(if connected) and both. Turns the display screen backlight off to save power. Press any key to return. Turns the internal touchpad on and off. 6 h s i l g n E Hotkey Icon Function Description

<Fn> + <F8>

Speaker toggle Turns the speakers on and off.

<Fn> +

<F11>

Num Lock

<Fn> +

<F12>

Scroll Lock When Num Lock is on, the embedded keypad is in numeric mode. The keys function as a calculator (complete with the arithmetic operators +, -, *, and /). Use this mode when you need to do a lot of numeric data entry. A better solution would be to connect an external keypad.

<Fn> + <F11> only for certain models. When Scroll Lock is on, the screen moves one line up or down when you press the up or down arrow keys respectively. Scroll Lock does not work with some applications.

<Fn> + < >

Brightness up Increases the screen brightness.

<Fn> + < >

Brightness down

<Fn> + < >

Volume up

<Fn> + < >

Volume down Decreases the screen brightness. Increases the sound volume (only for certain models). Decreases the sound volume (only for certain models). Using the communication key*

Here you can enable and disable the various wireless connectivity devices on your computer. Press <Fn> + <F3> to bring up the Launch Manager window panel. A red toggle indicates the device is off. Click On to enable Wi-Fi/Bluetooth connection. Click Off to disable connection.

* Communication devices may vary by model. 7 E n g l i s h Closed front view 1

Icon Item Description Power indicator Indicates the computer's power status. Indicates the computer's battery status. 1. Charging: The light shows amber when the battery is charging. 2. Fully charged: The light shows blue when in AC mode. Indicates the status of 3G / Wi-Fi communication Orange light on Blue light on 3G on / Wi-Fi on 3G on / Wi-Fi off 3G off / Wi-Fi on 3G off / Wi-Fi off Not lit Battery indicator 1 Communication indicator Rear view 1

Item Description 1 Battery bay Houses the computers battery pack. Note: Your computer may be equipped with a different battery to the one in the picture. 8 Left view h s i l g n E 1 2 3 4 5 Icon Item Description DC-in jack Connects to an AC adapter. Ethernet (RJ-45) port Connects to an Ethernet 10/100 based network. External display (VGA) port Connects to a display device (e.g., external monitor, LCD projector). HDMI port USB port Supports high-definition digital video connections. Connects to USB devices (e.g., USB mouse, USB camera).

1 2 3 4 5 Right view 1 2 3 4

Icon Item Description 1 2 Multi-in-1 card reader Accepts Secure Digital (SD), MultiMediaCard (MMC), Memory Stick

(MS), Memory Stick PRO (MS PRO), xD-

Picture Card (xD). Note: Push to remove/install the card. Only one card can operate at any given time. Headphone/speaker/

line-out jack Connects to audio line-out devices

(e.g., speakers, headphones). Microphone-in jack Accepts inputs from external microphones.

3 4 Icon Item USB ports Description Connect to USB devices

(e.g., USB mouse, USB camera). Kensington lock slot Connects to a Kensington-compatible computer security lock. 9 E n g l i s h Base view 1 2 6 5 4 3

1 2 3 4 Icon Item Description Ventilation slots and cooling fan Enable the computer to stay cool, even after prolonged use. Note: Do not cover or obstruct the opening of the fan. Battery release latch Releases the battery for removal. 3G SIM card slot Accepts a 3G SIM card for 3G connectivity

(only for certain models). Battery bay Houses the computer's battery pack. 10

5 6 h s i l g n E Icon Item Description Battery lock Locks the battery in position. Speaker Emits audio from your computer. Environment Operating: 5 C to 35 C Non-operating: -20 C to 65 C Temperature:

Humidity (non-condensing):

Operating: 20% to 80%

Non-operating: 20% to 80%

REGULATORY INFORMATION PREVENTION OF HEARING LOSS

- Caution: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time.

- A pleine puissance, lcoute prolonge du baladeur peut endommager loreille de lutilisateur. CAUTION when listening:

To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably.

- Do not increase the volume level after your ears have adjusted.

- Do not listen to music at high volumes for extended periods.

- Do not increase the volume to block out noisy surroundings.

- Decrease the volume if you cant hear people speaking near you. RADIO DEVICE REGULATORY NOTICE

- Note: Regulatory information below is for models with wireless LAN and/or Bluetooth only. Compliance accessories The accessories associated with this equipment are: shielded video cable when an external monitor is connected. These accessories are required to be used in order to ensure compliance with FCC rules. CALIFORNIA PROPOSITION 65 WARNING This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other reproductive harm. For additional information regarding this product warning, go to www.gateway.com/prop65. 88 - Regulatory information MERCURY WARNING THE LAMP IN THIS DISPLAY CONTAINS MERCURY. DISPOSE ACCORDING TO LOCAL, STATE, AND FEDERAL LAW.

(JAPAN) VCCI WIRELESS ADAPTER REGULATORY INFORMATION USA FCC and FAA The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits.

- The following safety precautions should be observed:

Do not touch or move antenna while the unit is transmitting or receiving.

- Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting.

- Do not operate the radio or attempt to transmit data unless the antenna is connected;

this behavior may cause damage to the radio. Use in specific environments:

- The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. Regulatory information - 89

- The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA).

- The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. Antenna Use In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons or at a minimum distance as specified by the FCC module grant conditions. FCC grants can be viewed from the FCC Equipment Authorization website at https://fjallfoss.fcc.gov/

oetcf/eas/reports/GenericSearch.cfm by entering the FCC ID printed on the module label. Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use Antenna Warnings

- Warning: To comply with the FCC and ANSI C95.1 RF exposure limits, it is recommended that for the wireless adapter installed in a desktop or portable computer, the antenna for this wireless adapter to be installed so as to provide a separation distance of at least 20 cm (8 inches) from all persons or at the minimum distance as specified by the module grant conditions. FCC grants can be viewed from the FCC Equipment Authorization website at https://fjallfoss.fcc.gov/oetcf/eas/

reports/GenericSearch.cfm by entering the FCC ID printed on the module label.

- Warning: The wireless adapter is not designed for use with high-gain directional antennas. Use On Aircraft Caution

- Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-

frequency wireless devices (wireless adapters) because their signals could interfere with critical interfere with critical aircraft instruments. 90 - Regulatory information Local Restrictions on 802.11a, 802.11b, 802.11g and 802.11n Radio Usage

- Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. Wireless Interoperability The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread spectrum (DSSS) radio technology and to comply with the following standards:

IEEE Std. 802.11b compliant Standard on Wireless LAN IEEE Std. 802.11g compliant Standard on Wireless LAN IEEE Std. 802.11a compliant Standard on Wireless LAN (applies to devices supporting 802.11a) IEEE Std. 802.11n draft 2.0 compliant on Wireless LAN

- Wireless Fidelity certification, as defined by the Wi-Fi Alliance The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some Regulatory information - 91 situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

- Using the wireless adapter on board airplanes, or

- Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. FCC Radio Frequency Interference Requirements (applies to device supporting 802.11a) This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz and 5.470 to 5.725 GHz frequency ranges. FCC requires this product to be used indoors for the frequency ranges 5.15 to 5.25 GHz and 5.470 to 5.725 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. No configuration controls are provided for this wireless adapter allowing any change in the frequency of operations outside the FCC grant of authorization for U.S operation according to Part 15.407 of the FCC rules. USA Federal Communications Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

- This device may not cause harmful interference.

- This device must accept any interference that may cause undesired operation.

- Note: The radiated output power of the adapter is far below the FCC radio frequency exposure limits. Nevertheless, the adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a 92 - Regulatory information distance of at least 20 cm between you (or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device. Interference Statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

- Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference.

- Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- Note: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Canada Industry Canada (IC) This device complies with RSS210 of Industry Canada. Cet appareil se conforme RSS210 de Canada d'Industrie. Regulatory information - 93

- Caution: When machine supports and using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25 GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25 to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-

point operation. To comply with RF exposure requirements all antennas should be located at a minimum distance of 20 cm, or the minimum separation distance allowed by the module approval, from the body of all persons.

- Attention: lutilisation dun rseau sans fil IEEE802.11a est rstreinte une utilisation en intrieur cause du fonctionement dans la bande de frquence 5,15 -

5,25 GHz. Industry Canada requiert que ce produit soit utilis lintrieur des btiments pour la bande de frquence 5,15 - 5,25 GHz afin de rduire les possibilits dinterfrences nuisibles aux canaux co-existants des systmes de transmission satellites. Les radars de puissances ont fait lobjet dune allocation primaire de frquences dans les bandes 5,25 - 5,35 GHz et 5 65 - 5 85 GHz. Ces stations radar peuvent crer des interfrences avec ce produit et/ou lui tre nuisible. Le gain dantenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin dtre conforme aux limites de puissance isotropique rayonne quivalente (P.I.R.E.) applicable dans les bandes 5,25 - 5,35 GHz et 5,725 - 5,85 GHz en fonctionement point--point. Se pour conformer aux conditions d'exposition de RF toutes les antennes devraient tre localises une distance minimum de 20 cm, ou la distance de sparation minimum permise par l'approbation de module, du corps de toutes les personnes. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme a la norme NMB-003 du Canada. 94 - Regulatory information

"To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing."

Pour empcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit tre utilis a l'intrieur et devrait tre plac loin des fentres afin de fournir un cran de blindage maximal. Si le matriel (ou son antenne d'mission) est install l'extrieur, il doit faire l'objet d'une licence. European Union List of applicable countries This product must be used in strict accordance with the regulations and constraints in the country of use. For further information, contact the local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. List of National Codes THIS EQUIPMENT MAY BE OPERATED IN THE FOLLOWING COUNTRIES:I ISO 3166 2 letter code MT NT PL PT SK SL ES SE ISO 3166 2 letter code AT Austria BE Belgium Cyprus CY Czech Republic CZ DK Denmark EE Estonia FI Finland France FR United Kingdom GB IS Iceland LI Liechtenstein Norway NO CH Switzerland BG Bulgaria RO Romania Turkey TR ISO 3166 2 letter code DE GR HU IE IT LV LT LU Germany Greece Hungary Ireland Italy Latvia Lithuania Luxembourg Malta Netherlands Poland Portugal Slovakia Slovenia Spain Sweden ISO 3166 2 letter code Country Country Country Country Regulatory information - 95 The low band 5.15 -5.35 GHz is for indoor use only. This equipment complies with the essential requirements of the European Union directive 1999/5/EC. See Statements of European Union Compliance, and more details refer to the attached Declaration of Conformity. English Finnish Dutch Hereby, Acer Inc., declares that this notebook PC is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Acer Inc. vakuuttaa tten ett notebook PC tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hierbij verklaart Acer Inc. dat het toestel notebook PC in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG Bij deze verklaart Acer Inc. dat deze notebook PC voldoet aan de essentile eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. 96 - Regulatory information French Swedish Danish German Par la prsente Acer Inc. dclare que l'appareil notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Par la prsente, Acer Inc. dclare que ce notebook PC est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables Hrmed intygar Acer Inc. att denna notebook PC str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/

5/EG. Undertegnede Acer Inc. erklrer herved, at flgende udstyr notebook PC overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF Hiermit erklrt Acer Inc., dass sich dieser/diese/dieses notebook PC in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi) Hiermit erklrt Acer Inc. die bereinstimmung des Gertes notebook PC mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG.

(Wien) Regulatory information - 97 Greek Italian Spanish Acer Inc. notebook PC 1999/5/

Con la presente Acer Inc. dichiara che questo notebook PC conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Por medio de la presente Acer Inc. declara que el notebook PC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE Portuguese Acer Inc. declara que este notebook PC est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. France Pour la France mtropolitaine :

2,400 - 2,4835 GHz (Canaux 1 13) autoris en usage intrieur 2,400 - 2,454 GHz (canaux 1 7) autoris en usage extrieur Pour la Guyane et la Runion :

2,400 - 2,4835 GHz (Canaux 1 13) autoris en usage intrieur 2,420 - 2,4835 GHz (canaux 5 13) autoris en usage extrieur Pour tout le territoire Franais :

Seulement 5,15 -5,35 GHz autoris pour le 802.11a 98 - Regulatory information L'utilisation de cet equipement (2,4 GHz WLAN) est soumise certaines restrictions :

- La puissance maximale autorise en intrieur est de 100 mW pour 2400 - 2483,5 MHz.

- La puissance maximale autorise est de 100 mW en extrieur pour 2400 - 2454 MHz.

- La puissance maximale autorise est de 10 mW en extrieur, 2454 - 2483,5 MHz. Pour les dernires restrictions, voir http://www.art-telecom.fr. Italy The use of these equipments is regulated by:

1.D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and article 105 (free use) for indoor use, in both cases for private use. 2.D.M. 28.5.03, for supply to public of RLAN access to networks and telecom services. Luso degli apparati regolamentato da:

1.D.L.gs 1.8.2003, n. 259, articoli 104 (attivit soggette ad autorizzazione generale) se utilizzati al di fuori del proprio fondo e 105 (libero uso) se utilizzati entro il proprio fondo, in entrambi i casi per uso private. 2.D.M. 28.5.03, per la fornitura al pubblico dellaccesso R-LAN alle reti e ai servizi di telecomunicazioni. Belgium Dans le cas d'une utilisation prive, l'extrieur d'un btiment, au-dessus d'un espace public, aucun enregistrement n'est ncessaire pour une distance de moins de 300 m. Pour une distance suprieure 300 m un enregistrement auprs de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT. In geval van priv-gebruik, buiten een gebouw, op een openbare plaats, is geen registratie nodig, wanneer de afstand minder dan 300 m is. Voor een afstand groter dan 300 m is een registratie bij BIPT vereist. Voor registraties en licenties, gelieve BIPT te contacteren. Regulatory information - 99 Brazil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Pakistan Pakistan Telecommunication Authority (PTA) Approved Morocco The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant and Taza. The operation of this product in the radio channels 4, 5, 6 and 7 (2425 - 2442 MHz) is not authorized in the following cities: Aroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Bni Hafida, Cabo Negro, Casablanca, Fs, Lakbab, Marrakech, Merchich, Mohammdia, Rabat, Sal, Tanger, Tan Tan, Taounate, Tit Mellil, Zag. Japan 5 GHz Korea Taiwan

100 - Regulatory information MODIFICATIONS TO THE PRODUCT CE Marking Gateway cannot be held responsible for unauthorized modifications made by the user and the consequences thereof, which may alter the conformity of the product with the CE Marking. Radio frequency interference The manufacturer is not responsible for any radio or TV interference caused by unauthorised modifications to this equipment. CONNECTIONS AND REMOTE EARTHS PELV (Protected Extra Low Voltage) To ensure the extra-low voltage integrity of the equipment, only connect equipment with mains-protected electrically-compatible circuits to the external ports. SELV (Safety Extra Low Voltage) Every input and output of this product is classified as Safety Extra Low Voltage. Remote earths To prevent electrical shock, connect all local (individual office) computers and computer support equipment to the same electrical circuit of the building wiring. If you are unsure, check the building wiring to avoid remote earth conditions. Building supply Only connect the equipment to a building supply that is in accordance with current wiring regulations in your country. In the U.K., these are the IEE regulations. POWER SUPPLY AND CABLES Power supply The power supply socket-inlet and socket-outlet (if equipped) are classified as Hazardous Voltage. Regulatory information - 101 You must unplug the power supply cord and remove the battery to disconnect the equipment from the power supply. In that aim, the socket-outlet should be installed near to the equipment and should be easily accessible. Input rating: Refer to the rating label on the bottom of the computer and ensure that your power adapter complies with the specified rating. Under no circumstances should the user attempt to disassemble the power supply. The power supply has no user-replaceable parts. Inside the power supply are hazardous voltages that can cause serious personal injury. A defective power supply must be returned to your dealer. Power cables and plug This Product requires a three-wire grounded power cord and plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. The cord length must not exceed 2.5 metres. To prevent electrical hazards, do not remove or disable the ground contact on the power cord. Replace the power cord if it gets damaged. Contact your dealer for an exact replacement. In Europe, the plug must be rated for 250 VAC, 10 amp minimum. The plug must display an international agency approval marking. The cord must be suitable for use in the end-user country. Consult your dealer or the local electrical authorities if you are unsure of the type of power cord to use in your country. Cables For cables which are not delivered with the Product in the computer's packaging:

The EMC performance of the system is guaranteed only if the cable and interface use efficient shielding. The use of shielded interface cable is required for USB, IEEE1394, serial, printer, game, analog or digital audio/ video, PS2, TV or FM antennas, and generally all high-speed cable interfaces. 102 - Regulatory information Use only UL Listed No. 26AWG or larger telecommunication cords. Only Ethernet LAN or RTC modem cable can have length exceeding 3 metres. Gateway recommends that you add a ferrite core round clip to each cable connecting your computer to a hardware device that was not included with your computer.

- Ferrite reference: 28A-2029 from Steward (two loops) During product certification, Gateway used the following cable quality:

- USB2.0 Certified Cables from Hama 46778

- RCA-RCA shielded Audio/Video Cables from Thomson KHC001M, KHC012M, IEEE1394 shielded FireWire from Hama 50011 KHC028M

- Stereo Jack shielded Audio cables from Hama 43330H, 42714H Heat Build-up and Portable Computers The AC adapter and the underside of the computer can become hot after prolonged use. Sustained physical contact with either should be avoided. CHASSIS COVER REMOVAL AND REPLACEMENT Before removing the chassis cover to service or modify the equipment, you must disconnect all power and modem cords, and remove or disable the battery.

- Caution: Some components inside the computer can become hot after prolonged use. You then must close the chassis before you plug in and switch on the equipment. LASER COMPLIANCE STATEMENT The optical devices are tested and certified to be compliant with International Electrotechnical Commission IEC60825-1 and European EN60825-1 standards for Class 1 laser products. Class 1 laser products are not considered hazardous. The optical devices are designed such that there is never human access to laser radiation above a Class 1 level during normal operation or prescribed maintenance conditions. Regulatory information - 103 The optical devices installed in your computer are designed for use solely as components of such electronic product and therefore do not comply with the appropriate requirements of Code of Federal Regulation Sec. 1040.10 and Sec. 1040.11 for COMPLETE laser products. Because exposure to laser radiation is extremely hazardous, under no circumstances should the user attempt to disassemble the laser device. PACKAGING The packaging of this product is compliant with the European Environmental Directive 94/

62/EC from December 20th 1994 and its equivalent in the French Legislation by the Decree 98-638 from july 20th 1998. COMPLIANT WITH RUSSIAN REGULATORY CERTIFICATION 104 - Regulatory information