|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5
|
Effective |
2024-12-13
|
|
1 2 3 4 5
|
Applicant's complete, legal business name |
Acer Incorporated
|
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0013355508
|
|
1 2 3 4 5
|
Physical Address |
8F, 88, Sec. 1, Xintai 5th Rd. Xizhi
|
|
1 2 3 4 5
|
New Taipei City, N/A 221
|
|
1 2 3 4 5
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5
|
TCB Application Email Address |
c******@telefication.com
|
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5
|
Grantee Code |
HLZ
|
|
1 2 3 4 5
|
Equipment Product Code |
BE201NG
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5
|
Name |
R**** J********
|
|
1 2 3 4 5
|
Title |
Sr. Manager
|
|
1 2 3 4 5
|
Telephone Number |
886-2******** Extension:
|
|
1 2 3 4 5
|
Fax Number |
886-2********
|
|
1 2 3 4 5
|
E-mail |
r******@acer.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5
|
Firm Name |
SGS Taiwan Ltd.
|
|
1 2 3 4 5
|
Name |
J****** C****
|
|
1 2 3 4 5
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
|
1 2 3 4 5
|
Taiwan
|
|
1 2 3 4 5
|
Telephone Number |
886 2********
|
|
1 2 3 4 5
|
Fax Number |
886 2********
|
|
1 2 3 4 5
|
E-mail |
j******@sgs.com
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3 4 5
|
Firm Name |
SGS Taiwan Ltd.
|
|
1 2 3 4 5
|
Name |
J******** C******
|
|
1 2 3 4 5
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
|
1 2 3 4 5
|
Taiwan
|
|
1 2 3 4 5
|
Telephone Number |
886 2********
|
|
1 2 3 4 5
|
Fax Number |
886 2********
|
|
1 2 3 4 5
|
E-mail |
j******@sgs.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/03/2025 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 | DTS - Digital Transmission System |
| 1 2 3 4 5 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 | 6CD - 15E 6 GHz Low Power Dual Client |
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel BE201NGW |
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 5 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: PD9BE201NG Grant Date: 03/12/2024 |
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 | Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). |
| 1 2 3 4 5 | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissiv |
| 1 2 3 4 5 | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change ap |
| 1 2 3 4 5 | Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (4.88 to 5.02 dBi). |
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5
|
Firm Name |
Intel Corporation S.A.S.
|
|
1 2 3 4 5
|
Name |
N****** A****
|
|
1 2 3 4 5
|
Telephone Number |
00334********
|
|
1 2 3 4 5
|
E-mail |
n******@intel.com
|
|