Overview
Connect with the USB Receiver
Plug in USB Receiver & start to use
Setup Wizard
Setup Wizard
Setup Wizard
1
3
2
4
5
1
3
2
4
5
1
3
2
4
5
1
3
2
4
5
6
6
6
6
1. Laser Pointer
4. Back
– Press and hold for laser
– Simple press to navigate
pointer function.
backward.
2. Pointer
– Press and hold to
highlight, magnify and
control the on-screen
cursor.
– Double press to use
custom functions.
3. Next
– Simple press to navigate
7
forward.
– Press and hold to use
custom functions.
– Press and hold to use
custom functions.
5. Haptic Feedback
– Receive silent timer
notifications and battery
alerts.
6. Rechargeable USB-C
– USB charge via USB
charging cable.
7. USB Receiver
– Plug the USB receiver into
your computer.
1. Laser Pointer
4. Back
– Press and hold for laser
– Simple press to navigate
pointer function.
backward.
2. Pointer
– Press and hold to
highlight, magnify and
control the on-screen
cursor.
– Double press to use
custom functions.
3. Next
– Simple press to navigate
7
forward.
– Press and hold to use
custom functions.
– Press and hold to use
custom functions.
5. Haptic Feedback
– Receive silent timer
notifications and battery
alerts.
6. Rechargeable USB-C
– USB charge via USB
charging cable.
7. USB Receiver
– Plug the USB receiver into
your computer.
1. Laser Pointer
4. Back
– Press and hold for laser
– Simple press to navigate
pointer function.
backward.
2. Pointer
– Press and hold to
highlight, magnify and
control the on-screen
cursor.
– Double press to use
custom functions.
3. Next
– Simple press to navigate
7
forward.
– Press and hold to use
custom functions.
– Press and hold to use
custom functions.
5. Haptic Feedback
– Receive silent timer
notifications and battery
alerts.
6. Rechargeable USB-C
– USB charge via USB
charging cable.
7. USB Receiver
– Plug the USB receiver into
your computer.
1. Laser Pointer
4. Back
– Press and hold for laser
– Simple press to navigate
pointer function.
backward.
2. Pointer
– Press and hold to
highlight, magnify and
control the on-screen
cursor.
– Double press to use
custom functions.
3. Next
– Simple press to navigate
7
forward.
– Press and hold to use
custom functions.
– Press and hold to use
custom functions.
5. Haptic Feedback
– Receive silent timer
notifications and battery
alerts.
6. Rechargeable USB-C
– USB charge via USB
charging cable.
7. USB Receiver
– Plug the USB receiver into
your computer.
Acer Interactive B1
AB-N1
Conductor Baton
Presentation Remote
Setup Wizard will help you to finish all settings.
Note: It may need to get the system authority from your PC.
You will be reminded by the on-screen display to
press any key to wake up the device.
The device is ready for use.
Overview
Connect with the USB Receiver
Plug in USB Receiver & start to use
Setup Wizard
Setup Wizard
Setup Wizard
Acer Interactive B1
AB-N1
Conductor Baton
Presentation Remote
Setup Wizard will help you to finish all settings.
Note: It may need to get the system authority from your PC.
You will be reminded by the on-screen display to
press any key to wake up the device.
The device is ready for use.
Overview
Connect with the USB Receiver
Plug in USB Receiver & start to use
Setup Wizard
Setup Wizard
Setup Wizard
Acer Interactive B1
AB-N1
Conductor Baton
Presentation Remote
Setup Wizard will help you to finish all settings.
Note: It may need to get the system authority from your PC.
You will be reminded by the on-screen display to
press any key to wake up the device.
The device is ready for use.
Overview
Connect with the USB Receiver
Plug in USB Receiver & start to use
Setup Wizard
Setup Wizard
Setup Wizard
Acer Interactive B1
AB-N1
Conductor Baton
Presentation Remote
Setup Wizard will help you to finish all settings.
Note: It may need to get the system authority from your PC.
You will be reminded by the on-screen display to
press any key to wake up the device.
The device is ready for use.
Next
Next
Next
Next
Safety instructions
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or
other risks. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel when:
• The power cord or plug is damaged, cut or frayed.
• Liquid was spilled into the product.
• The product was exposed to rain or water.
• The product has been dropped or the case has been damaged.
• The product exhibits a distinct change in performance, indicating a need for service.
• The product does not operate normally after following the operating instructions.
• The product exhibits a distinct change in performance, indicating a need for service.
• When unplugging the power cord, do not pull on the cord itself but pull on the plug.
• This product should be operated from the type of power indicated on the marking label.
Environment
Temperature:
− Operating: 5°C to 35°C
− Storage: -10°C to 40°C
Humidity (non-condensing):
− Operating: 20% to 80%
− Storage: 20% to 60%
Battery information
• Batteries may explode if not handled properly. Do not disassemble or dispose of them in fire.
• Do not tamper with batteries. Keep them away from children.
• Follow local regulations when disposing of used batteries.
• This device uses a Lithium battery. Do not use it in a humid, wet or corrosive environment.
• Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a
microwave oven or in a pressurized container, and do not expose it to temperatures 45°C (113°F).
• Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or
damage. Do not pierce, open or disassemble the battery.
• If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical
attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at
temperatures 0°C (32°F) or above 45°C (113°F).
• The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery
can be charged and discharged hundreds of times, but it will eventually wear out. When the operation time becomes
noticeably shorter than normal, buy a new battery. Use only the approved batteries, and recharge your battery only with the
approved chargers designated for this device.
• Never use any charger battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when
a metallic object such as a coin, clip or pen causes direct connection of the positive (+) and negative (-) terminals of the
battery. (These look like metal strips on the battery.)
Built-in battery must be replaced by an authorized service center. Do not attempt to replace or remove the battery by yourself.
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost
protection of the global environment, please recycle. For more information on the Waste from Electrical and
Electronics Equipment (WEEE) regulations, visit www.acer-group.com/public/Sustainability.
Device with built-in Battery
Disposal instructions
USA — FCC and FAA
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in
OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions
found in this manual will result in exposure substantially below the FCC’s recommended limits.
The following safety precautions should be observed:
• Do not touch or move antenna while the unit is transmitting or receiving.
• Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the
body, especially the face or eyes, while transmitting.
• Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to
the radio.
environments.
• The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such
• The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA).
• The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital.
• The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for
intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be
kept as far as possible form the user body or set the device to lower output if such function is available.
FCC RF Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure
condition without restriction.
Details of the authorized configurations can be found at www.fcc.gov/oet/ea/ by entering the FCC ID number on the device.
15.19
15.105
15.21
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Increase the separation between the equipment and receiver.
− Reorient or relocate the receiving antenna.
−
− Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
− Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to
operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not
possible
Canada — Industry Canada (IC)
This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie.
This device complies with Industry Canada licence-exempt RSSstandard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. CAN ICES-003(B)/NMB-003(B)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement. CAN ICES-003(B)/NMB-003(B)
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un
type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de
brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
IC RF Radiation Exposure Statement
Radiation Exposure Statement:
Déclaration d'exposition aux radiations:
European Union
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure
condition without restriction.
L'appareil a ete evalue pour repondre aux exigencies generals d'exposition aux radio frequencies. L'appareil peut etre utilise
en condition d'exposition portable sans restriction.
This product must be used in strict accordance with the regulations and constraints in the country of use. For further
information, contact the local office in the country of use. Please see https://europa.eu/european-union/about-
eu/countries_en for the latest country list.This equipment complies with the essential requirements of the European Union
directive 2014/53/EU. See Statements of European Union Compliance, and more details refer to the attached Declaration of
Conformity.
Russia
Taiwan
Compliant with Russian regulatory certification
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性
及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得
繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
具有雷射危害等級2之產品，禁止14歲以下兒童使用。
Optical drives
Caution: This appliance contains a laser system and is classified as “Class II laser product“. In case of any trouble with this
device, please contact your nearest AUTHORIZED service station. To prevent direct exposure to the laser beam, do not try to
open the enclosure.
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
BR2101xxxxxx, Acer Interactive B1 AB-N1XXX (X is 0~9, A-Z, a~z, -, /, _ or blank)
Presenter / USB Dongle
acer
Regulatory Model Number:
BR2101/BR2101-R
Product:
Brand:
Sku:
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
333 West San Carlos St., Suite 1500
San Jose, CA 95110, U. S. A.
Contact Person:
Acer Representative
Phone No.:
Fax No.:
07, 20, 2021
1-254-298-4000
1-254-298-4147
EC/EU Declaration of Conformity
We,
And,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
Contact Person: Mr. RU Jan, E-mail: ru.jan@acer.com
Acer Italy s.r.l.
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921 ,Fax: +39-02 9399-2913
www.acer.it
Product:
Trade Name:
Model Number:
Sku name:
Presenter/USB Dongle
acer
BR2101/BR2101-R
BR2101xxxxx, Acer interactive B1 AB-N1xxx (x is 0-9, a-z, A-Z, -, /, _ or blank)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the
relevant Union harmonization legislation: Directive 2014/53/EU on Radio Equipment, RoHS Directive 2011/65/EU and ErP
Directive 2009/125/EC. The following harmonized standards and/or other relevant standards have been applied:
Electromagnetic compatibility (Directive 2014/30/EU)
EN 55032:2015+A11:2020
ETSI EN 301 489-17 V3.2.4
EN 61000-3-3:2013
EN 55024:2010+A1:2015
EN 301 489-1 V2.2.0
EN 301 489-3 V2.1.1
ETSI EN 301 489-17 V2.2.3
EN 301 489-17 V3.2.0
EN 301 489-19 V2.1.0
Radio frequency spectrum usage (Directive 2014/53/EU)
Healthy and Safety (Directive 2014/35/EU)
EN 300 328 V2.2.2
EN 302 291-1 V1.1.1
EN 302 291-2 V1.1.1
EN 300 440 V2.1.1
EN 62368:2014
EN 62209-1:2006
EN 62209-2:2010
RoHS (Directive 2011/65/EU)
EN 50581:2012
ErP (Directive 2009/125/EC)
EN 303 413 V1.1.1
EN 301 511 V9.0.2
EN 301 893 V2.1.0
EN 301 908-1 V11.1.1
EN 301 908-2 V6.2.1
EN 301 908-13 V6.2.1
EN 62311:2008
EN 62479:2010
EN 50360: 2001/A1: 2012
EN 50566:2013
EN 55032-2:2013
Regulation (EU) No. 617/2013
Regulation (EC) No. 1275/2008; EN 50564:2011
Regulation (EC) No. 278/2009; EN 50563:2011
Operation frequency and radio-frequency power are listed as below:
Bluetooth: 2402-2480MHz < 10 dBm
Year to begin affixing CE marking: 2021
_______________________________
RU Jan / Sr. Manager
Acer Incorporated (Taipei, Taiwan)
7/21/2021
Date