all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Guide | Users Manual | 1.34 MiB | ||||
1 2 |
|
Internal Photos | Internal Photos | 881.42 KiB | ||||
1 2 |
|
External Photos | External Photos | 129.29 KiB | ||||
1 2 |
|
Label Location | ID Label/Location Info | 55.00 KiB | ||||
1 2 |
|
Authorization Letter | Cover Letter(s) | 20.45 KiB | ||||
1 2 |
|
Confidential Letter | Cover Letter(s) | 41.96 KiB | ||||
1 2 | RF Exposure Info | |||||||
1 2 |
|
Power of Attorney Letter | Cover Letter(s) | 13.86 KiB | ||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos |
1 2 | User Guide | Users Manual | 1.34 MiB |
60 GHz Wireless HD Transceiver MWIHD1 User's Guide Introduction Package contents The following items should be included:
Transmitter unit (MWIT1) Receiver unit (MWIR1) HDMI cable User's Guide Warranty Power adapter MHL cable If any of the above items is damaged or missing, please contact your supplier immediately. Using the product safely Always treat your product with care and keep it in a clean and dust-free place. Do not expose your product to liquid, moisture or humidity. Do not expose your product to temperatures above 40 C when in operation. Do not drop or throw your product. Do not attempt to disassemble or modify your product. Only authorized personnel should perform service. Your device is not water-resistant; keep it dry. Only use the supplied AC adapter. 1 Hardware 60 GHz Wireless HD MWIR1 / MWIT1 Front panel LED indicator LED Color Behavior Indication Power Blue Blinking slowly Blinking fast On Off The transmitter has started transmitting and has not yet found the receiver. Transmitter and receiver are linked and communicating with each other. The MWIR1 and MWIT1 have established an audio/video connection, the network is established. The adapter is turned off or in sleep mode. 2 Rear panel Find next HDMI/MHL Power switch DC-in Configuration Find next HDMI/MHL Short press (< 10 seconds) to detect the next source. This function allows you to switch the source of the audio/video to another in-range Wireless HD transmitter. This disconnects the current connection and triggers a connection to the next available source on the device list. Long press (> 10 seconds) to reset to factory defaults. This function allows you to reset the receiver to its original shipping condition. Connect an HDMI/MHL cable to this port and a TV or computer. Power switch Press to turn the power on or off. DC-in Connect the power adapter to the power DC-in jack. Installation Setup steps 1. Connect the transmitter to a media source, such as a computer, Blu-ray player or a smartphone using the HDMI/MHL cable. If connected to a computer, make sure the computer output resolution is in a supported video format. 2. Connect the receiver to the HDMI/MHL port on the projector. Select WirelessHD from the projector source list. 3 Step 1 The transmitter (MWIT1) Step 2 The receiver (MWIR1) Notes For the best results, the MWIT1 and MWIR1 should:
Face each other and be in the same room. Be no more than 33 feet (10 meters) apart. MWIT1 should not be placed in a cabinet or on a closed shelf. Do not place near metal objects. Do not forget to turn on the projector and ensure it is set up correctly. 4 3. Check that the transmitter is powered. 4. Turn on the transmitter. Select the source Connecting to a different transmitter 1. Turn on the new transmitter. Power switch 2. Press the Find next button for 2 seconds. Bouton Trouver suivant 3. The LED on the transmitter will start blinking quickly. When the new connection has been established, the LED will stop blinking and stay lit. 5 Specifications Specifications Standards Frequency Input/output HDMI/MHL -n (MWIT1), MHL out x 1 (MWIR1) Wireless HD 1.1, HDMI 1.4a, MHL V2.0 60 GHz Antenna type 24 antenna array Range A/V port Physical Adapter Power 10 meters in-room usage MWIT1: 1 port (CEC pass through) MWIR1: 1 port (CEC pass through) Weight:
Dimensions:
Input:
Output:
106 g (MWIT1) 120 g (MWIR1) 88.0 x 72.0 x 31.2 mm
(MWIT1) 100.0 x 30.0 x 18.0 mm
(MWIR1) AC 100 to 240 V at 50 /
60 Hz 0.3 A DC 5 V 2.0 A LED indicators One power indicator. Operating environment SRRC Number Operating temperature: 0 to 40 C Storage temperature: -20 to 70 C Operating humidity: 10% to 90%
(non-condensing) Storage humidity: 5% to 90%
(non-condensing) MWIT1:
MWIR1:
6 Video formats Video format Vertical refresh Color space Sampling Supported 480i
(1440 x 480i) 59.94 Hz 480p/480pw
(640 x 480p/
720 x 480p) 59.94 /
60 Hz 576i
(1440 x 576i) 50 Hz 576p/576pw
(720 x 576p) 50 Hz 720p
(1280 x 720p) 1080i
(1920 x 1080i) 50 Hz 59.94 /
60 Hz 50 Hz 59.94 /
60 Hz YCbCr RGB YCbCr RGB YCbCr RGB YCbCr YCbCr RGB YCbCr RGB YCbCr RGB YCbCr RGB YCbCr RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 7 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 23.976 /
24 Hz 1080p
(1920 x 1080p) 50 Hz 59.94 /
60 Hz YCbCr RGB YCbCr RGB YCbCr RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 VGA
(640 x 480) SVGA
(800 x 600) XGA
(1024 x 768) SXGA
(1280 x 1024) WSXGA+
(1680 x 1050) Frame packing Top to bottom Side by side 59.94 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 3D video formats 1080p @ 24 Hz 720p @ 50/60 Hz 1080p @ 24 Hz 720p @ 50/60 Hz 720i @ 50/60 Hz 1080i @ 50/60 Hz 1080p @ 50/60 Hz 8 Audio formats Audio sample rate LPCM 2/6/8-channel LPCM 2-channel 32 kHz 44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz Supported Supported
*Specification subject to change without notice. FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 10 metteur-rcepteur HD sans fil 60 GHz Guide dutilisation du MWIHD1 Introduction Contenu de lemballage Les lments suivants doivent tre inclus :
metteur (MWIT1) Rcepteur (MWIR1) Cble HDMI Guide dutilisation Garantie Adaptateur secteur Cble MHL Si un des lments ci-dessus tait manquant ou endommag, veuillez contacter immdiatement votre fournisseur. Utiliser le produit en toute scurit Manipulez toujours votre produit avec prcaution et gardez-le dans un endroit propre et sans poussire. Nexposez pas votre produit des liquides ou de lhumidit. Nexposez pas le produit des tempratures suprieures 40 C lorsquil est en fonctionnement. Ne laissez pas tomber ou ne jetez pas le produit. Ne tentez pas de dmonter ou de modifier votre produit. Seul le personnel autoris peut effectuer les rparations. Votre appareil nest pas tanche ; gardez-le au sec. Utilisez uniquement ladaptateur secteur fourni. 1 Matriel MWIR1 / MWIT1HD sans fil 60 GHz Panneau avant Tmoin diode Diode Couleur Comportement Indication Lmetteur a commenc transmettre et na pas encore trouv le rcepteur. Lmetteur et le rcepteur sont lis et communiquent entre eux. Le MWIR1 et le MWIT1 ont tabli une connexion audio/vido, le rseau est tabli. Ladaptateur est teint ou en mode veille. Clignote lentement Clignote rapidement Allum teint 2 Alimenta tion Bleu Panneau arrire Trouver suivant HDMI/MHL Interrupteur dalimentation Entre c.c Configuration Trouver suivant HDMI/MHL Appui court (< 10 secondes) pour dtecter la source suivante. Cette fonction vous permet de basculer la source de laudio/vido vers un autre metteur sans fil HD porte. Ceci interrompt la connexion en cours et dclenche une connexion la source disponible suivante sur la liste dappareils. Appui long (> 10 secondes) pour rinitialiser aux valeurs par dfaut dusine. Cette fonction vous permet de rinitialiser le rcepteur son tat dorigine lexpdition. Connectez un cble HDMI/MHL ce port et un tlviseur ou un ordinateur. Interrupteur dalimentation Appuyez pour allumer ou teindre. Entre c.c Connectez ladaptateur secteur la prise dentre dalimentation c.c. Installation tapes de configuration 1. Connectez lmetteur une source mdia, comme un ordinateur, un lecteur Blu-ray ou un Smartphone laide du cble HDMI/MHL. Si vous connect un ordinateur, assurez-vous que la rsolution en sortie de lordinateur est dans un format vido pris en charge. 3 2. Connectez le rcepteur au port HDMI/MHL sur le projecteur. Slectionnez WirelessHD dans la liste des sources de projecteurs. tape 1 Lmetteur (MWIT1) tape 2 Le receveur (MWIR1) Remarques Pour obtenir les meilleurs rsultats, le MWIT1 et le MWIR1 devrait :
tre en face lun de lautre et tre dans la mme pice. Ne devraient pas tre loigns de plus de 10 mtres (33 pieds). Le MWIT1 ne doit pas tre plac dans une armoire ou sur une tagre ferme. Ne placez pas dobjets mtalliques proximit. Noublier pas dallumer le projecteur et vrifiez quil est configur correctement. 4 3. Vrifiez que lmetteur est aliment. 4. Allumez lmetteur. Slectionner la source Se connecter un metteur diffrent 1. Allumez le nouvel metteur. Interrupteur dalimentation 2. Appuyez le bouton Trouver suivant pendant 2 secondes. Bouton Trouver suivant 3. La diode sur lmetteur commencera clignoter rapidement. Lorsque la nouvelle connexion a t tablie, la diode cessera de clignoter et restera allume. 5 Caractristiques Caractristiques Standards Frquence Entre/Sortie Sans fil HD 1.1, HDMI 1.4a, MHL V2.0 60 GHz HDMI/MHL -n (MWIT1), Sortie MHL x 1 (MWIR1) Type dantenne Groupe de 24 antennes Plage Port A/V Caractristiques physiques Alimentation de ladaptateur 10 mtres en utilisation en intrieur MWIT1 : 1 port (relais CEC) MWIR1 : 1 port (relais CEC) Poids :
Dimensions :
Entre :
Sortie :
106 g (MWIT1) 120 g (MWIR1) 88,0 x 72,0 x 31,2 mm
(MWIT1) 100,0 x 30,0 x 18,0 mm
(MWIR1) C.A. 100-240 V 50 /
60 Hz 0,3 A C.C. 5 V, 2,0 A Voyants diode Un voyant dalimentation. Conditions dutilisation Numro SRRC Temprature de fonctionnement : 0 40 C Temprature de stockage : -20 70 C Humidit en fonctionnement : 10% to 90% (sans condensation) Humidit de stockage : 5% to 90%
(sans condensation) MWIT1 :
MWIR1 :
6 Formats vido Format vido Rafrachi ssement vertical Espace couleur chantil lonnage Pris en charge 480i
(1440 x 480i) 59,94 Hz YCbCr RVB 480p/480pw
(640 x 480p/
720 x 480p) 59,94 / 60 YCbCr Hz RVB YCbCr RVB YCbCr YCbCr RVB YCbCr RVB 576i
(1440 x 576i) 50 Hz 576p/576pw
(720 x 576p) 50 Hz 50 Hz 720p
(1280 x 720p) 1080i
(1920 x 1080i) 59,94 / 60 YCbCr Hz 50 Hz RVB YCbCr RVB 59,94 / 60 YCbCr Hz RVB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui 7 23,976 /
24 Hz 1080p
(1920 x 1080p) 50 Hz YCbCr RVB YCbCr RVB 59,94 / 60 YCbCr Hz RVB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 59,94 Hz RVB 4:4:4 Oui Oui Oui Oui Oui Oui Oui Oui Oui Oui VGA
(640 x 480) SVGA
(800 x 600) XGA
(1024 x 768) SXGA
(1280 x 1024) WSXGA+
(1680 x 1050) Combinaison de trame Haut bas Cte cte 60 Hz RVB 4:4:4 Oui 60 Hz RVB 4:4:4 Oui 60 Hz RVB 4:4:4 Oui 60 Hz RVB 4:4:4 Oui Formats vido 3D 1080p 24 Hz 720p 50/60 Hz 1080p 24 Hz 720p 50/60 Hz 720i 50/60 Hz 1080i 50/60 Hz 1080p 50/60 Hz 8 Formats audio Taux dchantillonnage audio LPCM 2/6/8 canaux LPCM 2 canaux 32 kHz 44,1 kHz 48 kHz 88,2 kHz 96 kHz 176,4 kHz 192 kHz Pris en charge Pris en charge
*Les caractristiques peuvent tre modifies sans pravis. FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 10 60 GHz WLAN HD Transceiver MWIHD1 Bedienungsanleitung Einleitung Packungsinhalt Die folgenden Artikel sollten enthalten sein:
Sendeeinheit (MWIT1) Empfangseinheit (MWIR1) HDMI Kabel Bedienungsanleitung Garantie Netzteil MHL-Kabel Wenn einer der oben genannten Artikel beschdigt oder nicht vorhanden ist, kontaktieren Sie bitte umgehend Ihren Hndler. Sicherung Verwendung des Produktes Behandeln Sie das Produkt immer sorgfltig und bewahren Sie es an einem sauberen und staubfreien Ort auf. Setzen Sie das Produkt keine Flssigkeiten, Nsse oder Feuchtigkeit aus. Setzen Sie das Produkt keinen Temperaturen ber 40C whrend des Betriebs aus. Das Produkt nicht fallenlassen oder werfen. Das Produkt nicht auseinandernehmen oder modifizieren. Wartungsarbeiten drfen nur von Fachpersonal durchgefhrt werden. Das Gert ist nicht wasserdicht, halten Sie es trocken. Verwenden Sie nur das beiliegende Netzteil. 1 Hardware 60 GHz WLAN HD MWIR1 / MWIT1 Vorderseite LED-Anzeige LED Farbe Verhalten Anzeige Ein/Aus Blau Blinkt langsam Blinkt schnell Ein Aus Der Sender hat mit dem Senden begonnen und dem Empfnger noch nicht gefunden. Sender und Empfnger sind miteinander verbunden und kommunizieren miteinander. MWIR1 und MWIT1 haben eine Audio/Video-Verbindun g hergestellt, das Netzwerk ist hergestellt. Der Adapter ist ausgeschaltet oder im Standbymodus. 2 Rckseite Nchste finden HDMI/MHL Ein/Aus-
Schalter DC-
Eingang Konfiguration Nchste finden HDMI/MHL Langsam drcken (< 10 Sekunden), um die nchste Quelle zu suchen. Mit dieser Funktion knnen die Audio/Video-Quelle auf einen WLAN HD Sender in Reichweite wechseln. Dies trennt die aktuelle Verbindung und startet eine Verbindung mit der nchsten verfgbaren Quelle in der Gerteliste. Lang drcken (> 10 Sekunden), um auf Standardwerte zurckzusetzen. Mit dieser Funktion knnen Sie den Empfnger auf den Werkszustand zurcksetzen. Schlieen Sie ein HDMI/MHL Kabel an diesen Port und einen Fernseher oder Computer an. Ein/Aus-Schalter Drcken Sie diese Taste, um das Gert DC-Eingang ein- und auszuschalten. Schlieen Sie das Netzteil an die DC-Eingangsbuchse an. Installation Einrichtungsschritte 1. Verbinden Sie den Sender mit dem HDMI/MHL-Kabel mit einer Medienquelle wie z.B. einem Computer, Blu-ray Player oder einem Smartphone. Stellen Sie beim Anschluss an einen Computer sicher, dass die 3 Ausgangsauflsung des Computers der eines untersttzten Videoformats entspricht. 2. Verbinden Sie den Empfnger mit dem HDMI/MHL-Anschluss am Projektor. Whlen Wire-
lessHD aus der Quellliste des Projektors. Schritt 1 Der Sender (MWIT1) Schritt 2 Der Empfnger (MWIR1) Notizen Fr optimale Ergebnisse sollten der MWIT1 und MWIR1:
Sich gegenberstehen und im selben Raum sein. Nicht mehr als 10 Meter voneinander entfernt sein. MWIT1 solltenicht einen Schrank oder ein geschlossenes Regal gestellt werden. Nicht in der Nhe von Metallgegenstnden aufstel-
len. Vergessen Sie nicht den Projektor einzuschalten und stellen Sie sicher, dass er richtig eingerichtet ist. 4 3. Prfen Sie, dass der Sender eingeschaltet ist. 4. Schalten Sie den Sender ein. Auswahl der Quelle Verbindung mit einem anderen Sender 1. Schalten Sie den neuen Sender ein. Ein/Aus-Schalter 2. Drcken Sie 2 Sekunden lang auf Nchste finden. Nchste finden Taste 3. Die LED am Sender wird anfangen schnell zu blinken. Wenn die neue Verbindung hergestellt wurde, wird die LED aufhren zu blinken und dauerhaft leuchten. 5 A/V-Anschluss Antennentyp Bereich WLAN HD 1.1, HDMI 1.4a, MHL V2.0 60 GHz Technische Daten Technische Daten Standards Frequenz Eingang/Ausgang HDMI/MHL -n (MWIT1), MHL Ausgang x 1 (MWIR1) 24 Antennenanordnung 10 Meter Nutzung innen MWIT1: 1 Anschluss (CEC Passthrough) MWIR1: 1 Anschluss (CEC Passthrough) Gewicht:
Abmessungen:
Eingang:
Ausgang:
Eine Netzanzeige. Betriebstemperatur: 0 bis 40 C Lagertemperatur: -20 bis 70 C Betriebsluftfeuchtigkeit: 10% bis 90% (nicht kondensierend) Lagerluftfeuchtigkeit: 5% bis 90%
(nicht kondensierend) MWIT1:
MWIR1:
106 g (MWIT1) 120 g (MWIR1) 88,0 x 72,0 x 31,2 mm (MWIT1) 100,0 x 30,0 x 18,0 mm (MWIR1) AC 100 bis 240 V bei 50 / 60 Hz 0,3 A DC 5 V 2,0 A Physikalische Daten Betriebsumgebung SRRC Nummer LED-Anzeigen Netzteil 6 Videoformate Videoformat Vertikale Aktualisie rung 480i
(1440 x 480i) 59,94 Hz 480p/480pw
(640 x 480p/
720 x 480p) 59,94 /
60 Hz 576i
(1440 x 576i) 50 Hz 576p/576pw
(720 x 576p) 50 Hz 720p
(1280 x 720p) 1080i
(1920 x 1080i) 50 Hz 59,94 /
60 Hz 50 Hz 59,94 /
60 Hz Farbraum Abtastung Untersttzt YCbCr RGB YCbCr RGB YCbCr RGB YCbCr YCbCr RGB YCbCr RGB YCbCr RGB YCbCr RGB YCbCr RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja 7 Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja Ja 23,976 /
24 Hz 1080p
(1920 x 1080p) 50 Hz 59,94 /
60 Hz VGA
(640 x 480) 59,94 Hz YCbCr RGB YCbCr RGB YCbCr RGB RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:4:4 SVGA
(800 x 600) XGA
(1024 x 768) 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 SXGA
(1280 x 1024) 60 Hz WSXGA+
(1680 x 1050) 60 Hz RGB 4:4:4 RGB 4:4:4 3D Videoformate Frame Packing Oben nach unten Seite an Seite 1080p @ 24 Hz 720p @ 50/60 Hz 1080p @ 24 Hz 720p @ 50/60 Hz 720i @ 50/60 Hz 1080i @ 50/60 Hz 1080p @ 50/60 Hz 8 Audioformate Audio Abtastrate LPCM 2/6/8-Kanal LPCM 2-Kanal 32 kHz 44,1 kHz 48 kHz 88,2 kHz 96 kHz 176,4 kHz 192 kHz Untersttzt Untersttzt
*Die technischen Daten des Produktes knnen ohne Ankndigung gendert werden. FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV techni-
cian for help. 9 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Oper-
ation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with mini-
mum distance 20 cm between the radiator and your body. CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with mini-
mum distance 20 cm between the radiator and your body. 10 Ricetrasmettitore HD wireless da 60 GHz Guida per lutente di MWIHD1 Introduzione Contenuto della confezione Devono essere presenti i seguenti articoli:
Unit del trasmettitore (MWIT1) Unit del ricevitore (MWIR1) Cavo HDMI Guida per lutente Garanzia Adattatore di alimentazione Cavo MHL Se uno degli elementi di cui sopra danneggiato o mancante, si prega di contattare immediatamente il fornitore. Utilizzo del prodotto in modo sicuro Trattare sempre il prodotto con cura e conservarlo in un luogo pulito e privo di polvere. Non esporre il prodotto a liquidi, condensa o umidit. Non esporre il prodotto a temperature superiori a 40 C durante il funzionamento. Non far cadere o lanciare il prodotto. Non tentare di smontare o modificare il prodotto. Le riparazioni devono essere effettuate solo da personale autorizzato. Il dispositivo non impermeabile; tenerlo asciutto. Utilizzare solo l'adattatore CA fornito in dotazione. 1 Hardware 60 GHz Wireless HD MWIR1 / MWIT1 Pannello anteriore Indicatore LED LED Colore Alimenta zione Blu Comporta mento Lampeggio lento Lampeggio rapido Acceso Disattivo Indicazione Il trasmettitore ha iniziato la trasmissione e non ha ancora trovato il ricevitore. Il trasmettitore e il ricevitore sono collegati e comunicanti tra loro. MWIR1 e MWIT1 hanno stabilito un collegamento audio/video, la rete attiva. L'adattatore spento o in modalit di sospensione. 2 Pannello posteriore Trova successiva HDMI/MHL Interruttore alimentazione Ingresso CC Configurazione Premere brevemente (< 10 secondi) per rilevare la sorgente successiva. Questa funzione consente di commutare la sorgente audio/video a un altro trasmettitore Wireless HD all'interno del raggio. Questo disconnette la connessione corrente ed attiva una connessione alla sorgente successiva disponibile nell'elenco dei dispositivi. Premere a lungo (> 10 secondi) per ripristinare alle impostazioni predefinite di fabbrica. Questa funzione consente di ripristinare il ricevitore alla condizione di spedizione originale. Collegare un cavo HDMI/MHL a questa porta e a un televisore o un computer. Premere per accendere o spegnere l'apparecchio. Collegare l'adattatore di alimentazione alla presa di ingresso CC. Trova successiva HDMI/MHL Interruttore alimentazione Ingresso CC Installazione Passaggi di configurazione 1. Collegare il trasmettitore a una sorgente multimediale, come un computer, lettore Blu-ray o smartphone utilizzando il cavo HDMI/MHL. Se collegato a un computer, assicurarsi che la risoluzione di uscita del computer sia in un formato video supportato. 3 2. Collegare il ricevitore alla porta HDMI/MHL del proiettore. Selezionare WirelessHD dall'elenco delle sorgenti del proiettore. Passo 1 Il trasmettitore (MWIT1) Passo 2 Il ricevitore (MWIR1) Note Per ottenere risultati ottimali, il MWIT1 e il MWIR1 devono:
essere uno di fronte all'altro e trovarsi nella stessa stanza. Non trovarsi a pi di 10 metri di distanza. MWIT1 non deve essere riposto in un mobile o su uno scaffale chiuso. Non posizionare vicino a oggetti metallici. Non dimenticare di accendere il proiettore e assicurarsi che sia configurato correttamente. 4 3. Verificare che il trasmettitore sia alimentato. 4. Accendere il trasmettitore. Selezione della sorgente Collegamento a un trasmettitore diverso 1. Accendere il nuovo trasmettitore. Interruttore alimentazione 2. Premere il pulsante Trova successiva per 2 secondi. Trova il pulsante Avanti 3. Il LED sul trasmettitore inizia a lampeggiare rapidamenye. Una volta stabilita la nuova connessione, il LED smette di lampeggiare e rimane acceso. 5 Specifiche Specifiche Standard Frequenza Ingresso/uscita HDMI/MHL -n (MWIT1), Uscita MHL x 1 (MWIR1) Wireless HD 1.1, HDMI 1.4a, MHL V2.0 60 GHz Tipo di antenna Intervallo Porta A/V Caratteristiche fisiche Alimentazione dell'adattatore Gruppo di 24 antenne 10 metri utilizzo nella stanza MWIT1: 1 porta (CEC pass through) MWIR1: 1 porta (CEC pass through) Peso:
Dimensioni:
Ingresso:
Uscita:
106 g (MWIT1) 120 g (MWIR1) 88,0 x 72,0 x 31,2 mm
(MWIT1) 100,0 x 30,0 x 18,0 mm
(MWIR1) CA da 100 a 240 V a 50 / 60 Hz 0,3 A CC 5 V 2,0 A Indicatori LED Un indicatore di alimentazione. Ambiente operativo Numero SRRC Temperatura operativa: da 0 a 40 C Temperatura di stoccaggio: da -20 a 70 C Umidit operativa: da 10% a 90% (senza condensa) Umidit di stoccaggio: da 5% a 90%
(senza condensa) MWIT1:
MWIR1:
6 Formati video Formato video Aggiorna mento verticale Spazio colore Campiona mento Suppor tato 480i
(1440 x 480i) 59,94 Hz YCbCr RGB 480p/480pw
(640 x 480p/
720 x 480p) 59,94 / 60 YCbCr Hz RGB YCbCr RGB YCbCr YCbCr RGB YCbCr RGB 576i
(1440 x 576i) 50 Hz 576p/576pw
(720 x 576p) 50 Hz 50 Hz 720p
(1280 x 720p) 1080i
(1920 x 1080i) 59,94 / 60 YCbCr Hz 50 Hz RGB YCbCr RGB 59,94 / 60 YCbCr Hz RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 S S S S S S S S S S S S S S S S S S S S S S S S 7 S S S S S S S S S S S S S S 23,976 /
24 Hz 1080p
(1920 x 1080p) 50 Hz YCbCr RGB YCbCr RGB 59,94 / 60 YCbCr Hz RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 VGA
(640 x 480) SVGA
(800 x 600) XGA
(1024 x 768) SXGA
(1280 x 1024) WSXGA+
(1680 x 1050) Frame packing Dall'alto in basso Fianco a fianco 59,94 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 Formati video 3D 1080p @ 24 Hz 720p @ 50/60 Hz 1080p @ 24 Hz 720p @ 50/60 Hz 720i @ 50/60 Hz 1080i @ 50/60 Hz 1080p @ 50/60 Hz 8 Formati audio Frequenza di campionamento audio LPCM 2/6/8 canali LPCM 2 canali 32 kHz 44,1 kHz 48 kHz 88,2 kHz 96 kHz 176,4 kHz 192 kHz Supportato Supportato
*Le specifiche possono essere soggette a cambiamenti senza preavviso. FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 10 Transceptor HD inalmbrico 60 GHz Manual de usuario del MWIHD1 Introduccin Contenido de la caja La caja debera incluir los siguientes artculos:
Unidad transmisora (MWIT1) Unidad receptora (MWIR1) Cable HDMI Manual de usuario Garanta Adaptador de corriente Cable MHL Si alguno de los artculos anteriores falta de la caja o est daado, pngase en contacto inmediatamente con su proveedor. Utilizacin segura del producto Trate su producto con cuidado en todo momento y mantngalo en un lugar limpio y sin polvo. No exponga el producto a lquidos ni a la humedad. No someta el producto a temperaturas superiores a los 40 C mientras est en funcionamiento. No deje caer ni arroje el producto. No intente desmontar ni modificar el producto. Las tareas de reparacin solo debe efectuarlas el personal autorizado. Este dispositivo no es impermeable, mantngalo seco. Utilice nicamente el adaptador de CA incluido. 1 Hardware MWIR1/MWIT1 inalmbrico HD 60 GHz Panel frontal Indicador LED LED Color Alimenta cin Azul Comporta miento Parpadeo lento Parpadeo rpido Encendido Apagado Indicacin El transmisor ha iniciado la transmisin pero an no ha encontrado el receptor. El transmisor y el receptor estn vinculados y se estn comunicando entre s. El MWIR1 y el MWIT1 han establecido una conexin de audio/vdeo, la red est establecida. El adaptador est apagado o en el modo de suspensin. 2 Panel trasero Buscar siguiente HDMI/MHL Interruptor de encendido Entrada de CC Configuracin Pulsar brevemente (< 10 segundos) para detectar la siguiente fuente. Esta funcin le permite conmutar la fuente de audio/vdeo a otro transmisor HD inalmbrico que se encuentre dentro del alcance. Desconecta la conexin actual y activa una conexin con la siguiente fuente disponible de la lista de dispositivos. Mantener pulsada (> 10 segundos) para restablecer a los valores predeterminados de fbrica. Esta funcin le permite restablecer el receptor al estado de envo original. Conecte un cable HDMI/MHL a este puerto y a un televisor u ordenador. Pulsar para encender o apagar el dispositivo. Conecte el adaptador de corriente a la toma de entrada de CC de alimentacin. Buscar siguiente HDMI/MHL Interruptor de encendido Entrada de CC Instalacin Pasos de configuracin 1. Conecte el transmisor a una fuente de contenido multimedia, como un ordenador, reproductor Blu-ray o smartphone utilizando el cable HDMI/MHL. Si lo conecta a un ordenador, asegrese de que la resolucin de salida del ordenador corresponda a un formato de vdeo compatible. 3 2. Conecte el receptor al puerto HDMI/MHL del proyector. Seleccione WirelessHD en la lista de fuentes del proyector. Paso 1 El transmisor (MWIT1) Paso 2 El receptor (MWIR1) Notas Para lograr los mejores resultados posibles el MWIT1 y el MWIR1 deben:
Estar orientados uno hacia el otro y encontrarse en la misma sala. Estar separados por una distancia inferior a 10 metros (33 pies). El MWIT1 no debe colocarse en un armario ni en una estantera cerrada. No lo coloque cerca de objetos metlicos. No olvide encender el proyector y asegurarse de que se encuentra correctamente configurado. 4 3. Asegrese de que el transmisor se encuentra encendido. 4. Encienda el transmisor. Seleccione la fuente Conexin a un transmisor distinto 1. Encienda el nuevo transmisor. Interruptor de encendido 2. Pulse el botn Buscar siguiente durante 2 segundos. Botn Buscar siguiente 3. El LED del transmisor empezar a parpadear rpidamente. Cuando se haya establecido la nueva conexin, el LED dejar de parpadear y permanecer encendido. 5 Especificaciones Especificaciones Estndares HD inalmbrico 1.1, HDMI 1.4a, MHL V2.0 60 GHz Frecuencia Entrada/salida HDMI/MHL -n (MWIT1), 1 salida MHL (MWIR1) Tipo de antena Matriz de 24 antenas Alcance Puerto de A/V Caractersticas fsicas Adaptador de corriente Indicadores LED Entorno de funcionamiento Nmero SRRC Uso de 10 metros en salas MWIT1: 1 puerto (pasarela CEC) MWIR1: 1 puerto (pasarela CEC) Peso:
Dimensiones:
Entrada:
Salida:
106 g (MWIT1) 120 g (MWIR1) 88,0 72,0 31,2 mm
(MWIT1) 100,0 30,0 18,0 mm
(MWIR1) CA de 100 a 240 V a 50/60 Hz 0,3 A CC de 5 V 2,0 A Un indicador de alimentacin. Temperatura de funcionamiento: de 0 a 40 C Temperatura de almacenamiento: de
-20 a 70 C Humedad de funcionamiento: del 10%
al 90 % (sin condensacin) Humedad de almacenamiento: del 5%
al 90 % (sin condensacin) MWIT1:
MWIR1:
6 Espacio de color Muestreo Compati ble Formatos de vdeo Formato de vdeo Actualiza cin vertical 480i
(1440 480i) 59,94 Hz 480p/480pw
(640 480p/720 480p) 59,94/60 Hz 576i
(1440 576i) 50 Hz 576p/576pw
(720 576p) 50 Hz 50 Hz YCbCr RGB YCbCr RGB YCbCr RGB YCbCr YCbCr RGB YCbCr RGB 720p
(1280 720p) 1080i
(1920 1080i) 59,94/60 YCbCr Hz 50 Hz RGB YCbCr RGB 59,94/60 YCbCr Hz RGB 7 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 23,976/
24 Hz 1080p
(1920 1080p) 50 Hz YCbCr RGB YCbCr RGB 59,94/60 YCbCr Hz RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 VGA
(640 480) SVGA
(800 600) XGA
(1024 768) SXGA
(1280 1024) WSXGA+
(1680 1050) 59,94 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 Formatos de vdeo en 3D Empaquetamien to de cuadros De arriba a abajo Lado a lado 1080p a 24 Hz 720p a 50/60 Hz 1080p a 24 Hz 720p a 50/60 Hz 720i a 50/60 Hz 1080i a 50/60 Hz 1080p a 50/60 Hz 8 Formato de audio Tasa de muestreo de audio LPCM 2/6/8 canales LPCM 2 canales 32 kHz 44,1 kHz 48 kHz 88,2 kHz 96 kHz 176,4 kHz 192 kHz Compatible Compatible
*Las especificaciones estn sujetas a cambios sin previo aviso. FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 10 Transceptor HD 60 GHz Sem fios Manual do Utilizador do MWIHD1 Introduo Contedo da embalagem Devem estar includos os seguintes itens:
Unidade Transmissora (MWIT1) Unidade Receptora (MWIR1) Cabo HDMI Manual do Utilizador Garantia Transformador Cabo MHL Se algum dos itens acima estiver danificado ou em falta, contacte de imediato o fornecedor. Usar o produto em segurana Trate sempre o produto com cuidado, e mantenha-o num local limpo e sem p. No exponha o produto a lquidos, vapores ou humidade. No exponha o produto a temperaturas acima dos 40 C quando em funcionamento. No deixe cair nem atire o produto. No tente desmontar nem modificar o produto. Apenas pessoal autorizado dever realizar reparaes. O dispositivo no prova de gua; mantenha-o seco. Use apenas o transformador CA fornecido. 1 Hardware 60 GHz HD Sem Fios MWIR1 / MWIT1 Painel frontal Indicador LED Cor LED Comportamento Indicao O transmissor iniciou a transmisso e ainda no localizou ou receptor. O transmissor e receptor esto conectados e a comunicar entre si. O MWIR1 e MWIT1 estabeleceram uma ligao udio/vdeo, a rede foi estabelecida. O adaptador est desligado, ou no modo de suspenso. Piscar lento Piscar rpido Ligado Desligado 2 Alimen tao Azul Painel traseiro Encontrar seguinte HDMI/MHL Interruptor de alimentao Entrada DC Configurao Encontrar seguinte HDMI/MHL Interruptor de alimentao Entrada DC Pressionar curto (< 10 segundos) para detectar a fonte seguinte. Esta funo permite-lhe mudar a fonte udio/vdeo para outro transmissor Sem Fios HD ao alcance. Isto desliga a ligao actual e activa uma ligao fonte disponvel seguinte na lista de dispositivos. Pressionar longo (> 10 segundos) para repor as predefinies. Esta funo permite-lhe repor o receptor s condies originais com que foi enviado. Ligue um cabo HDMI/MHL a esta porta e a uma TV ou computador. Prima para ligar ou desligar a alimentao. Ligue o transformador tomada de entrada DC de alimentao. Instalao Passos de configurao 1. Ligue o transmissor a uma fonte multimdia, como um computador, leitor Blu-ray ou smartphone, usando o cabo HDMI/MHL. Se ligar a um computador, certifique-se que a resoluo de sada do computador est num formato vdeo suportado. 2. Ligue o receptor porta HDMI/MHL no projector. Seleccione WirelessHD da lista de fontes do projector. 3 Passo 1 O transmissor (MWIT1) Passo 2 O receptor (MWIR1) Notas Para os melhores resultados, o MWIT1 e MWIR1 devem:
Estar frente a frente e na mesma diviso. Estar a menos de 33 ps (10 metros) de distncia um do outro. O MWIT1 no dever ser colocado num armrio nem prateleira fechada. No o coloque perto de objectos metlicos. No se esquea de ligar o projector e certifique-se que est correctamente configurado. 4 3. Verifique se o transmissor est ligado. 4. Ligue o transmissor. Seleccione a fonte Ligar a um transmissor diferente 1. Ligue o novo transmissor. Interruptor de alimentao 2. Prima o boto Encontrar seguinte durante 2 segundos. Boto Encontrar seguinte 3. A LED no transmissor ir comear a piscar rapidamente. Quando a nova ligao tiver sido estabelecida, a LED ir parar de piscar, para ficar acesa. 5 Especificaes Especificaes Normas Frequncia Entrada/sada HDMI/MHL -n (MWIT1), sada MHL x 1 (MWIR1) Wireless HD 1.1, HDMI 1.4a, MHL V2.0 60 GHz Tipo de antena Conjunto de 24 antenas Alcance Porta A/V Fsicas Transformador Indicadores LED Condies ambientais Nmero SRRC 10 metros, em utilizao dentro de uma diviso MWIT1: 1 porta (passagem CEC) MWIR1: 1 porta (passagem CEC) Peso:
Dimenses:
Entrada:
Sada:
106 g (MWIT1) 120 g (MWIR1) 88,0 x 72,0 x 31,2 mm
(MWIT1) 100,0 x 30,0 x 18,0 mm
(MWIR1) 100 a 240 V CA a 50 / 60 Hz 0,3 A DC 5 V 2,0 A Um indicador de alimentao. Temperatura em funcionamento:
0 a 40 C Temperatura em armazenamento:
-20 a 70 C Humidade em funcionamento:
10% a 90% (sem condensao) Humidade em armazenamento:
5% a 90% (sem condensao) MWIT1:
MWIR1:
6 Formatos vdeo Formato vdeo Actuali zao vertical Gama de cor Amostra gem Suportado 480i
(1440 x 480i) 59,94 Hz 480p/480pw
(640 x 480p/
720 x 480p) 59,94 /
60 Hz 576i
(1440 x 576i) 50 Hz 576p/576pw
(720 x 576p) 50 Hz 720p
(1280 x 720p) 1080i
(1920 x 1080i) 50 Hz 59,94 /
60 Hz 50 Hz 59,94 /
60 Hz YCbCr RGB YCbCr RGB YCbCr RGB YCbCr YCbCr RGB YCbCr RGB YCbCr RGB YCbCr RGB YCbCr RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim 7 Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim Sim 23,976 /
24 Hz 1080p
(1920 x 1080p) 50 Hz 59,94 /
60 Hz YCbCr RGB YCbCr RGB YCbCr RGB 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 VGA
(640 x 480) SVGA
(800 x 600) XGA
(1024 x 768) SXGA
(1280 x 1024) WSXGA+
(1680 x 1050) Formato Frame Packing Topo para fundo Lado a lado 59,94 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 Formatos vdeo 3D 1080p @ 24 Hz 720p @ 50/60 Hz 1080p @ 24 Hz 720p @ 50/60 Hz 720i @ 50/60 Hz 1080i @ 50/60 Hz 1080p @ 50/60 Hz 8 Formatos udio Taxa de amostragem udio LPCM 2/6/8-canais LPCM 2-canais 32 kHz 44,1 kHz 48 kHz 88,2 kHz 96 kHz 176,4 kHz 192 kHz Suportado Suportado
*As especificaes esto sujeitas a alterao sem aviso prvio. FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 10 60 GHz HD MWIHD1
(MWIT1)
(MWIR1) HDMI MHL 40 C AC 1 60 GHz HD MWIR1 / MWIT1 LED LED MWIR1 MWIT1 2 HDMI/MHL DC
(< 10 ) HD
(> 10 ) HDMI/MHL HDMI/MHL DC DC 1. HDMI/MHL 3 2. HDMI/MHL WirelessHD 1 (MWIT1) 2 (MWIR1) MWIT1 MWIR1 33 (10 )MWIT1 4 3. 4. 1. 2. 2 3. LED LED 5 HD 1.1HDMI 1.4aMHL V2.0 60 GHz
/
HDMI/MHL -n (MWIT1) MHL x 1 (MWIR1) 24 10 A/V MWIT11 (CEC ) MWIR11 (CEC ) 106 g (MWIT1) 120 g (MWIR1) 88.0 x 72.0 x 31.2 mm
(MWIT1) 100.0 x 30.0 x 18.0 mm
(MWIR1) AC 100 240 V 50 / 60 Hz 0.3 A DC 5 V 2.0 A LED 0 40 C
-20 70 C 10% 90% () 5% 90% () SRRC MWIT1 MWIR1 6
(1440 x 576i)
(1440 x 480i) 576p/576pw
(720 x 576p) 480p/480pw
(640 x 480p/
720 x 480p) Hz RGB RGB RGB 576i 480i 50 Hz 50 Hz YCbCr YCbCr YCbCr YCbCr 59.94 Hz 59.94 / 60 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 59.94 / 60 59.94 / 60 YCbCr YCbCr YCbCr YCbCr YCbCr 1080i 50 Hz 50 Hz 720p RGB RGB RGB RGB RGB Hz Hz
(1280 x 720p)
(1920 x 1080i) 7 YCbCr 23.976 /
24 Hz 4:2:2 4:4:4 1080p
(1920 x 1080p) 50 Hz RGB 4:4:4 YCbCr 4:2:2 4:4:4 RGB 4:4:4 YCbCr 59.94 / 60 Hz 4:2:2 4:4:4 RGB 4:4:4 59.94 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 3D 1080p @ 24 Hz 720p @ 50/60 Hz 1080p @ 24 Hz 720p @ 50/60 Hz 720i @ 50/60 Hz 1080i @ 50/60 Hz 1080p @ 50/60 Hz 8 VGA
(640 x 480) SVGA
(800 x 600) XGA
(1024 x 768) SXGA
(1280 x 1024) WSXGA+
(1680 x 1050) LPCM 2/6/8 LPCM 2 32 kHz 44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz
*
FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 10 60 GHz HD MWIHD1
(MWIT1)
(MWIR1) HDMI MHL 40C AC 1 60 GHz HD MWIR1 / MWIT1 LED LED MWIR1 MWIT1
/
2 HDMI/MHL
(< 10 )
/
HD
(> 10 ) HDMI/MHL HDMI/MHL 1. HDMI/MHL 3 2. HDMI/MHL WirelessHD 1 (MWIT1) 2 (MWIR1) MWIT1 MWIR1 33
(10 )MWIT1 4 3. 4. 1. 2. 2 3. LED LED 5 HD 1.1HDMI 1.4aMHL V2.0 60 GHz
/
HDMI/MHL -n (MWIT1) MHL x 1 (MWIR1) 24 10 A/V MWIT11 (CEC ) MWIR11 (CEC ) 106 (MWIT1) 120 (MWIR1) 88.0 x 72.0 x 31.2
(MWIT1) 100.0 x 30.0 x 18.0
(MWIR1) AC 100 240 V 50 / 60 Hz 0.3 A DC 5 V 2.0 A LED 0 40C
-20 40C 10% 90% () 5% 90% () SRRC MWIT1 MWIR1 6
(1440 x 480i)
(1440 x 576i) 576p/576pw
(720 x 576p) 480p/480pw
(640 x 480p/
720 x 480p) Hz RGB RGB RGB 576i 480i 50 Hz 50 Hz YCbCr YCbCr YCbCr YCbCr 59.94 Hz 59.94 / 60 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 4:2:2 4:4:4 4:4:4 59.94 / 60 59.94 / 60 YCbCr YCbCr YCbCr YCbCr YCbCr 1080i 50 Hz 50 Hz 720p RGB RGB RGB RGB RGB Hz Hz
(1280 x 720p)
(1920 x 1080i) 7 YCbCr 23.976 /
24 Hz 4:2:2 4:4:4 1080p
(1920 x 1080p) 50 Hz RGB 4:4:4 YCbCr 4:2:2 4:4:4 RGB 4:4:4 YCbCr 59.94 / 60 Hz 4:2:2 4:4:4 RGB 4:4:4 59.94 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 60 Hz RGB 4:4:4 3D 1080p @ 24 Hz 720p @ 50/60 Hz 1080p @ 24 Hz 720p @ 50/60 Hz 720i @ 50/60 Hz 1080i @ 50/60 Hz 1080p @ 50/60 Hz 8 VGA
(640 x 480) SVGA
(800 x 600) XGA
(1024 x 768) SXGA
(1280 x 1024) WSXGA+
(1680 x 1050) LPCM 2/6/8-
LPCM 2-
32 kHz 44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz
*
FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 9 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 10
1 2 | Authorization Letter | Cover Letter(s) | 20.45 KiB |
Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih New Taipei City 22181, Taiwan, R.O.C. TEL: +886-2-2696-3131 ext.3089 Fax : 886-2-8691-3120 www.acer.com Date:2011/8/22 To who may concern, I, the undersigned, responsible for the designated person in FCC grant communicator / IC company code contactor, hereby authorized RU Jan to sign the FCC / IC application form for certification process. Thank you, Sincerely Yours, Contact Person: Harriot S.L. Lee Company Name: Acer Incorporated E-Mail: harriot_lee@acer.com.tw
1 2 | Confidential Letter | Cover Letter(s) | 41.96 KiB |
Acer Incorporated 8F, 88, Sec 1, Hsin Tai Wu Rd Hsichih, Taipei Hsien, 221 Taiwan Tel: 886-2-6606-3131 #3811 / Fax: 886-2-2696-3535 Confidential Letter Date: 2014/10/14 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality Request for FCC IDHLZMWIR1 Gentlemen:
The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Short-term Pursuant to DA 04-1705 of the Commissions pubic notice, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:
1. External Photos Permanent Acer Incorporated requests that the material in the following files be withheld from public disclosure in accordance with Section 0.457 of the Commissions Rules, 47 C.F.R. 0.459, following grant of the application. 1. Block Diagram Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. 3. Operational Description 3. Test Setup photos 2. Circuit Diagram 2. Internal Photos 4. Users Manual Note: The registered grantee contact is not available, RU Jan is signing for grantee contact. He/She can be reached at email: RU.Jan@acer.com. Sincerely, Signature E-Mail Tel. Applicants company name
: Acer Incorporated Applicants company address
: 8F, 88, Sec 1, Hsin Tai Wu Rd Hsichih, Taipei Hsien, 221 Taiwan Name and Job Title
: Harriot S.L. Lee / Manager Signed for Harriot S.L. Lee
: Harriot_Lee@acer.com.tw
: 886-2-6606-3131 #3811
1 2 | Power of Attorney Letter | Cover Letter(s) | 13.86 KiB |
Acer Incorporated 8F, 88, Sec 1, Hsin Tai Wu Rd Hsichih, Taipei Hsien, 221 Taiwan Tel: 886-2-6606-3131 #3811 / Fax: 886-2-2696-3535 Power of Attorney Date: 2014/10/14 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address Name Job Title e-mail
: No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C.
: Leo Huang
: Manager
: Leohuang@sporton.com.tw I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: Acer / MWIR1 FCC ID: HLZMWIR1 Product name: Wireless for HDMI 60 GHz Note: The registered grantee contact is not available, RU Jan is signing for grantee contact. He/She can be reached at email: RU.Jan@acer.com. FCC Grantee contact person information. Applicants company name
: Acer Incorporated Applicants company address
: 8F, 88, Sec 1, Hsin Tai Wu Rd Hsichih, Taipei Hsien, 221 Taiwan Signature E-Mail Tel.
: Harriot_Lee@acer.com.tw
: 886-2-6606-3131 #3811 Name and Job Title
: Harriot S.L. Lee / Manager Signed for Harriot S.L. Lee
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-01-29 | 62320 ~ 62960 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2015-01-29
|
||||
1 2 | Applicant's complete, legal business name |
Acer Incorporated
|
||||
1 2 | FCC Registration Number (FRN) |
0013355508
|
||||
1 2 | Physical Address |
8F, 88, Sec 1, Hsin Tai Wu Rd
|
||||
1 2 |
Hsichih, Taipei Hsien, 221
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
HLZ
|
||||
1 2 | Equipment Product Code |
MWIR1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
H****** S******** L******
|
||||
1 2 | Title |
Manager
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
H******@acer.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/27/2015 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 2 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless for HDMI 60 GHz | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 | Grant Comments | Power listed is rmaximum peak conducted power. Operation is restricted to indoor use only. The antenna installation and operating configurations of this transmitter must satisfy MPE categorical exclusion requirements of § 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Sporton International Inc.
|
||||
1 2 | Name |
A******** C****
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 60160 | 60800 | 0.028 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 62320 | 62960 | 0.029 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC