DKR010 Connect the keyboard to an available USB port and press Fn + F5 to switch USB mode than Quick Start Guide Guide de dmarrage rapide Getting started USB wired mode can start to use. Do not disassemble the device or operate the device under abnormal conditions. Do not submerge the device in water. If the device could not be functional, or there was thermal abnormal situation, please re-plug in the connector or reconnect the Bluetooth. If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. Ne dmontez pas lappareil et nutilisez pas lappareil dans des conditions anormales. Ne plongez pas lappareil dans leau. Si lappareil ne fonctionne pas ou sil y a eu une situation anormale, veuillez rebrancher le connecteur ou reconnecter Bluetooth. Si vous avez toujours des problmes aprs avoir pass en revue les mesures correctrices, veuillez contacter votre revendeur ou un centre de service agr. English LED Indicator Abbreviations KEYBOARD & MOUSE INFORMATION Franais Abrviations de diode tmoin INFORMATIONS SUR LE CLAVIER ET LA SOURIS Quick Start Guide
: Battery Status (Battery low LED flash; Battery charging LED on)
: Number Lock
: Caps Lock & Pairing LED (Bluetooth Pairing LED flash <1 time/sec> ;
BluetoothConnecting LED flash <2 times/sec>) WIRELESS KEYBOARD Specifications Model: DKR010 Mechanical Keyboard Dual mode support: Bluetooth + USB Cable Cable Length: 1800mm detachable USB cable (for recharging and cable mode) Backlight: Amber light with 4 level backlit brightness & 7 lighting effect Dimensions (L x W x H): 449.5 x 126.5 x 23.86 mm Weight: 647g 10g Battery: Li-ion battery 3.8V 1550mAh Connect up to 4 Bluetooth devices at the same time and easily switching between 4 devices. Bluetooth wireless mode 1. Slide the power switch to power on position. 2. Press Fn + F1 (BT1) ~ F4 (BT4) to switch Bluetooth wireless mode. 3. Hold the key FN + Pause for 3 seconds until the Caps Lock indicator starts blinking. 4. Open user Bluetooth host device and search ConceptD Keyboard then finish connect. The keyboard will enter sleep mode when no operation detected after 30 minutes. LED backlit will also be off in the sleep mode. Press any key to wake up and resume operation.
*Note: Please fully charge the battery for at least 4 hours before operating for the first time. Keyboard function Hotkey Description Fn + F1-F4 Switch to Bluetooth device 1~4 and the corresponding LED will flash Switch to USB Mode Turn on/off the keyboard lock Open the Calculator Turn on/off mute Fn + F11 / F12 Adjust the sound volume Fn + Pause Bluetooth pairing Fn + F5 Fn + F6 Fn + F9 Fn + F10 Fn +
Fn +
Adjust the backlit brightness levels. (100%, 75%, 50%, OFF) Switch the backlit lighting effect WIRELESS MOUSE Dimensions (L x W x H): 102 x 61 x 32 mm Weight: 60g 5g (without battery) Specifications Model: DMR900 DPI: 1200 Getting started 1. Open the battery compartment cover at the top of the mouse 2. Insert an AA battery into the battery compartment. t e r y B a t 3. Replace the battery compartment cover. 4. Slide the power switch to power on position, Blue LED will light on then turn off. 5. Slide the power switch to Bluetooth Link position, Blue LED will start flash. 6. Open user Bluetooth host device and search ConceptD Mouse then finish connect.
*Power LED Indicator: When battery low, RED LED will start flash, please change battery before battery drains out. Wireless range under 10 meters Package Contents ConceptD Wireless Keyboard x 1 ConceptD Wireless Mouse x 1 Quick Start Guide x 1 Warranty booklet x 1 AA Battery x 1 System Compatibility Windows, Android Caution Environment Temperature:
Operating: 0 C to 40 C Non-operating: -20 C to 65 C Humidity (non-condensing):
Operating: 30% to 80%
Non-operating: 10% to 90%
Manufacturer address Acer Inc.
: tat de la pile (pile faible diode clignotante ; pile en charge diode allume) Porte sans-fil infrieure 10 mtres
: Verrouillage numrique
: Verr Maj et diode dassociation (association Bluetooth diode clignotante <1 fois/s> ;
connexion Bluetooth diode clignotante <2 fois/s>) Guide de dmarrage rapide CLAVIER SANS-FIL Spcifications Modle : DKR010 Clavier mcanique Support du mode double : Bluetooth + cble USB Longueur de cble : Cble USB amovible de 1800 mm (pour la recharge et le mode cble) Rtroclairage : Lumire orange avec luminosit rtroclaire 4 niveaux et 7 effets dclairage Dimensions (Lo x La x H) : 449,5 x 126,5 x 23,86 mm Poids : 647g 10g Pile : Pile Li-ion 3.8V 1550mAh Connectez jusqu 4 appareils Bluetooth en mme temps et basculez facilement entre 4 appareils. SOURIS SANS-FIL Caractristiques Modle : DMR900 Dimensions (Lo x La x H) : 102 x 61 x 32 mm Poids : 60g 5g (sans pile) PPP : 1200 Pour commencer Pour commencer Mode filaire USB Mode sans-fil Bluetooth commence clignoter. terminez la connexion. Connectez le clavier un port USB disponible et appuyez Fn + F5 pour passer au mode USB que vous pouvez commencer utiliser. 1. Ouvrez le couvercle du compartiment de la pile au-dessus de la souris. 1. Faites glisser linterrupteur dalimentation en position de mise sous tension. 2. Appuyez Fn + F1 (BT1) ~ F4 (BT4) pour changer le mode sans-fil Bluetooth. 3. Maintenez la touche FN + Pause pendant 3 secondes jusqu ce que lindicateur Verr Maj 4. Ouvrez lappareil hte Bluetooth de lutilisateur et recherchez Clavier ConceptD , puis 2. Insrez une pile AA dans le compartiment de la pile. Le clavier passe en mode veille lorsquaucune opration nest dtecte aprs 30 minutes. Le rtroclairage diode sera galement teint en mode veille. Appuyez une touche pour vous rveiller et reprendre le fonctionnement.
*Remarque : Veuillez charger compltement la pile pendant au moins 4 heures avant de lutiliser pour la premire fois. t e r y B a t 3. Rinstallez le couvercle du compartiment de la pile. Touche spciale Description Fn + F1-F4 Basculer vers lappareil Bluetooth 1~4 et la diode correspondante clignote Passer en mode USB Activer/dsactiver le verrouillage du clavier Ouvrir la calculatrice Dsactiver/activer le son Fn + F11 / F12 Ajuster le volume sonore Fn + Pause Association Bluetooth Fn + F5 Fn + F6 Fn + F9 Fn + F10 Fn +
Fn +
Ajustez les niveaux de luminosit rtroclaire. (100%, 75%, 50%, DS) Changer leffet dclairage rtroclair 4. Faites glisser linterrupteur dalimentation en position de mise sous tension, la diode bleue sallume puis steint. commence clignoter. terminez la connexion. 5. Faites glisser linterrupteur dalimentation en position Lien Bluetooth, la diode bleue 6. Ouvrez lappareil hte Bluetooth de lutilisateur et recherchez Souris ConceptD , puis
*Diode tmoin dalimentation Lorsque la batterie est faible, la DIODE ROUGE commencera clignoter, veuillez changer la pile avant que la pile ne se vide. Contenu de lemballage Clavier sans-fil ConceptD x 1 Souris sans-fil ConceptD x 1 Guide de dmarrage rapide x 1 Livret de garantie x 1 Pile AA x 1 Compatibilit systme Windows, Android Attention Environnement Temprature :
En marche : 0 C 40 C larrt : -20 C 65 C Humidit (sans condensation) :
En marche : 30% 80%
larrt : 10% 90%
Adresse du fabricant Acer Inc. 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan Fonction du clavier 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan DMR900 Quick Start Guide Guide de dmarrage rapide Product name /
Wireless Keyboard /
Wireless Mouse /
Model No. / DKR010 / DMR900 Wireless Keyboard Rated / 5V 800mA Wireless Mouse Rated / 1.5V 15mA FCC ID: HLZDKR010 FCC ID: HLZAMR010 Made in China /
( LED / LED )
& LED ( LED <> / LED <>) LED DMR900 DPI1200 1.
( x x )102 x 61 x 32 60 5 () DKR010
+ USB 1800 USB () 4 7
( x x )449.5 x 126.5 x 23.86 647 10 3.8V 1550mAh 4 4 USB 1. USB Fn + F5 USB Fn + F1-F4 14 LED Fn + F5 Fn + F6 Fn + F9 Fn + F10 Fn + F11 / F12 Fn + Pause Fn +
Fn +
USB
100%75%50%
2. Fn+F1 ( 1) ~ F4 ( 4) 3. FN + Pause 3 4. ConceptD Keyboard 30 LED
* 4 2. t e r y B a t 3. 4. ON LED 5. LED 6. ConceptD Mouse
* LED LED 10 ConceptD x 1 ConceptD x 1 x 1 x 1 x 1 WindowsAndroid 0 C 40 C
-20 C 65 C
() 30% 80%
10% 90%
+886-2-2696-0099 221 88 8 369 7 5 Rm. 5, 7F., No. 369, Fuxing N. Rd., Songshan Dist., Taipei City 105, Taiwan (R.O.C.) Equipment name DKR010 Type designation (Type) Restricted substances and its chemical symbols Mercury Cadmium
(Hg)
(Cd) Hexavalent chromium
(Cr+6) Polybrominated biphenyls
(PBB) Polybrominated diphenyl ethers
(PBDE) Unit Unit Lead
(Pb) Lead
(Pb) 1.0.1 wt %0.01 wt %
Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption. Equipment name DMR900 Type designation (Type) Restricted substances and its chemical symbols Mercury Cadmium
(Hg)
(Cd) Hexavalent chromium
(Cr+6) Polybrominated biphenyls
(PBB) Polybrominated diphenyl ethers
(PBDE) 1.0.1 wt %0.01 wt %
Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption. Europe EU Declaration of Conformity We declare under our sole responsibility that the product is conformity with all the essential requirements and other provisions of the European Council Directive RoHS Directive (2011/65/EU), Radio Equipment Directive (2014/53/EU) on issued by the Commission of the European Community. This product must not be disposed of with your other House hold waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. IC Statement This device complies with ISED license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Dclaration IC Cet appareil est conforme aux normes dexemption de licence RSS ISED. Son fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas causer dinterfrence et (2) cet appareil doit accepter toute interfrence, notamment les interferences qui peuvent affecter son fonctionnement. Lutilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration d'exposition aux radiations:
Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. Caution: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan We, And, Acer Italy s.r.l. Viale delle Industrie 1/A, 20020 Arese (MI), Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Product:
Trade Name:
Model Number: DKR010 & DMR900 Wireless Keyboard & Wireless Mouse acer We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislation: Radio Equipment Directive 2014/53/EU and RoHS Directive 2011/65/EU. The following harmonized standards and/or other relevant standards have been applied:
EN 300 328 V2.1.1 (2016-11) EN 301 489-1 V2.1.1 (2017-02) EN 301 489-17 V3.1.1 (2017-02) EN 55032:2015 + AC: 2016, Class B EN 61000-3-2:2014 (Not applicable) EN 61000-3-3:2013 (Not applicable) EN 61000-4-2:2009 EN 61000-4-3:2006 +A1:2008 +A2:2010 EN 61000-4-4:2012 (Not applicable) EN 61000-4-5:2014 (Not applicable) EN 61000-4-6:2014 (Not applicable) EN 61000-4-11:2004 (Not applicable) EN 62479:2010 EN 55032:2015 +AC:2016, Class B N 55024:2010 EN 61000-4-2:2009 / IEC 61000-4-2:2008 ED. 2.0 EN 61000-4-3:2006 +A1:2008 +A2:2010 / IEC 61000-4-3:2010 ED. 3.2 EN 61000-4-4:2012 / IEC 6100-4-4:2012 ED. 3.0 (Not applicable) EN 61000-4-5:2014 / IEC 6100-4-5:2014 ED. 3.0 (Not applicable) EN 61000-4-6:2014 / IEC 6100-4-6:2013 ED. 4.0 (Not applicable) EN 61000-4-8:2010 / IEC 6100-4-8:2009 ED. 2.0 EN 61000-4-11:2004 / IEC 6100-4-11:2004 ED. 2.0 (Not applicable) EN 62368-1:2014/AC:2017 This radio equipment operates with the following frequency bands and maximum radio-frequency power:
Concept D Wireless Mouse:
Frequency: 2402-2480MHz Maximum Output Power: 0dBm Concept D Wireless Mouse:
Frequency: 2402-2480MHz Maximum Output Power: 4dBm RU Jan / Sr. Manager Acer Incorporated (Taipei, Taiwan) 5/14/2020 Date Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Year to begin affixing CE marking: 2020.