FCC ID: HLZ9560NGW WLAN and BT, 2x2 PCIe M.2 2230 adapter card

 

Regulatory Information and Safety Guide 2 -

2017. All Rights Reserved. Regulatory Information and Safety Guide This revision: 04/2017 TABLE OF CONTENTS Table of contents - 3 Important safety information for children Tips and information for comfortable use 5 Finding your comfort zone .......................... 5 Taking care of your vision........................... 6 Developing good work habits...................... 7 Protecting your hearing............................... 7 4 Basic care and tips for using your computer 8 Turning your computer on and off............... 8 Taking care of your computer ..................... 8 General ....................................................... 9 Pack your computer carefully...................... 9 Safety instructions ................................. 10 Product servicing ...................................... 10 Cleaning and servicing.............................. 10 Battery and adapter information ............ 11 Accessing the power................................. 11 Disconnecting the power source............... 11 Using electrical power............................... 11 Guidelines for safe battery usage ............. 13 Internal battery....................................... 15 Warnings and regulatory information 16 Optical drives......................................... 16 Telephone line safety............................. 17 Emergency calls........................................ 17 Medical devices ..................................... 17 Vehicles ................................................. 18 Potentially explosive environments........ 18 Disposal instructions.............................. 19 ENERGY STAR ..................................... 19 Wireless adapter regulatory information 20 Radio frequency interference.................... 20 Use on aircraft........................................... 21 The wireless adapter and your health....... 21 USA FCC and FAA............................... 21 FCC radio frequency interference requirements............................................. 22 RF exposure ............................................. 24 Canada Industry Canada (IC) .............. 24 European Union ........................................ 26 Compliant with Russian regulatory certification................................................ 29 4 - Important safety information for children IMPORTANT SAFETY INFORMATION FOR CHILDREN CAUTION - ELECTRICALLY OPERATED PRODUCT. THIS IS NOT A TOY. TO AVOID RISK OF ELECTRIC SHOCK OR FIRE IT SHOULD NOT BE USED WITHOUT ADULT SUPERVISION OR PLACED WHERE SMALL CHILDREN CAN REACH IT. CAUTION -

ELECTRICALLY OPERATED PRODUCT. Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed during handling and use of electrical products to reduce the risk of electric shock.

"CAUTION for film bag - Keep away from small children; the thin film may cling to nose and mouth and prevent breathing."

As with the power supply (adapter) should not be handled by the children, precautions should be observed during handling and use to prevent electric shock and high temperature. Children should be very careful while handling the power supply

(adapter), in particular plugging the power supply into the receptacle

(power outlet). The product should not be placed on the bare skin (e.g. lap of a child) for long periods. The laptop should be placed on a flat surface, like a desk or tabletop, if intending to use it for more than a few minutes. The product, including power supply and battery pack, as applicable should not be left in the rain or exposure to water. If cleaning is necessary do not immerse in water; wipe clean with a damp cloth. The product, including power supply and battery pack, as applicable should not be dropped, crushed (stepped on) or otherwise abused. Children should be careful with the cable (wiring) between the power supply (adapter) and laptop, in particular as a potential trip hazard. An adult should periodically inspect the product for damage, including the power supply and casing around the battery pack, (as applicable, and replace or send for repair if necessary. Similarly, if a child notices damage or broken parts, this should be reported to an adult immediately so that the damaged parts can be replaced or repaired. TIPS AND INFORMATION FOR COMFORTABLE USE Tips and information for comfortable use - 5 Important Some of the information in this guide may not apply to your computer. Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditions, personal health and other factors greatly increase the risk of physical injury. Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders. The following symptoms may appear in the hands, wrists, arms, shoulders, neck or back:

Numbness, or a burning or tingling sensation. Aching, soreness or tenderness. Pain, swelling or throbbing. Stiffness or tightness. Coldness or weakness. If you have these symptoms, or any other recurring or persistent discomfort and/or pain related to computer use, consult a physician immediately and inform your company's health and safety department. The following section provides tips for more comfortable computer use. Finding your comfort zone Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the following tips:

Refrain from staying too long in one fixed posture. 6 - Tips and information for comfortable use Avoid slouching forward and/or leaning backward. Stand up and walk around regularly to remove the strain on your leg muscles. Take short rests to relax your neck and shoulders. Avoid tensing your muscles or shrugging your shoulders. Install the external display, keyboard and mouse properly and within comfortable reach. If you view your monitor more than your documents, place the display at the center of your desk to minimize neck strain. Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes Rest your eyes frequently. Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. Blink frequently to keep your eyes from drying out. Display Keep your display clean. Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display. Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity. Eliminate glare and reflections by:

placing your display in such a way that the side faces the window or any light source, minimizing room light by using drapes, shades or blinds, using a task light, changing the display's viewing angle, using a glare-reduction filter, Tips and information for comfortable use - 7 using a display visor, such as a piece of cardboard extended from the display's top front edge. Avoid adjusting your display to an awkward viewing angle. Avoid looking at bright light sources for extended periods of time. Developing good work habits The following work habits make computer use more relaxing and productive:

Take short breaks regularly and often. Perform some stretching exercises. Breathe fresh air as often as possible. Exercise regularly and maintain a healthy body. Warning We do not recommend using the computer on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. Protecting your hearing Warning Permanent hearing if earphones or headphones are used at high volume for prolonged periods of time. loss may occur To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. 8 - Basic care and tips for using your computer BASIC CARE AND TIPS FOR USING YOUR COMPUTER Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning your computer on and off To turn on the computer, simply press and release the power button. Please refer to the setup poster for the location of the power button. Note If you cannot power off the computer normally, press and hold the power button for more than four seconds to shut down the computer. If you turn off the computer and want to turn it on again, wait at least two seconds before powering up. Taking care of your computer Your computer will serve you well if you take care of it. Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator. Do not subject the computer to magnetic fields. Do not expose the computer to rain or moisture. Do not spill water or any liquid on the computer. Do not drop, bump, scratches, twist, hit, shake push, or place heavy objects on your computer, display, or external devices. Do not subject the computer to heavy shock or vibration. Do not expose the computer to dust or dirt. Never place objects on top of the computer. Do not slam the computer display when you close it. Never place the computer on uneven surfaces. Where possible, keep all objects at least 15 cm away from the computer to avoid causing computer damage. General Basic care and tips for using your computer - 9 Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause a short-circuit or damage rotor devices, HDD, optical drive, and even exposure risk from the lithium battery pack. The bottom surface, areas around ventilation openings and AC adapter may get hot. To avoid injury, ensure they do not come in contact with your skin or body. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. The surface temperature of the base will rise during normal operation, particularly when plugged in to AC power. Allowing sustained contact with exposed skin can cause discomfort or burns. Pack your computer carefully Use a quality carrying case that provides adequate cushioning and protection. Do not pack your computer in a tightly packed suitcase or bag. 10 - Basic care and tips for using your computer Before putting your computer in a carrying case, make sure that it is off or in sleep mode. Do not put a computer in a carrying case while it is turned on. Safety instructions Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

The power cord or plug is damaged, cut or frayed. Liquid was spilled into the product. The product was exposed to rain or water. The product has been dropped or the case has been damaged. The product exhibits a distinct change in performance, indicating a need for service. The product does not operate normally after following the operating instructions. The product exhibits a distinct change in performance, indicating a need for service. The product does not operate normally after following the operating instructions. Note Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Cleaning and servicing When cleaning the computer, follow these steps:

1.Turn off the computer and remove the battery pack if applicable. Basic care and tips for using your computer - 11 2.Disconnect the AC adapter. 3.Use a soft, moist cloth. Do not use liquid or aerosol cleaners. Prevent Electrostatic discharge: A discharge of static electricity from finger or other electrostatic conductors can seriously damage a battery, or other electronic components and cause loss of information deletion from electrostatic damage to a drive. Before handling an electronic device, discharge static electricity by touching an unpainted metal surface. Battery and adapter information Accessing the power Be sure that the power outlet you plug into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug from the electrical outlet. Disconnecting the power source Observe the following guidelines when connecting and disconnecting power to the power supply unit:

Install the power supply unit before connecting to the AC power outlet. Unplug before removing the power supply unit from the computer. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Using electrical power Do not connect the adapter to any other device. When unplugging the power cord, do not pull on the cord itself but pull on the plug. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. 12 - Basic care and tips for using your computer If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. If this product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. The system can be powered using a wide range of voltages; 100 to 120 or 220 to 240 V or 100-240 V AC. The power cord included with the system meets the requirements for use in the country/region where the system was purchased. Power cords for use in other countries/regions must meet the requirements for that country/

region. For more information on power cord requirements, contact an authorized reseller or service provider. Guidelines for safe battery usage Basic care and tips for using your computer - 13 Warning When using a charging cart or a small space to simultaneously charge or operate multiple devices , the area must be well- ventilated and the temperature kept between 0 C (32 F) to 35 C (95 F) and battery charging must be stopped when 100% capacity is reached. Continuous charging can cause deformation or damage to the battery/

device. Precautions when charging batteries The useful lifespan of a battery is adversely affected by the following behavior:

Constantly charging the battery/device when already at full capacity. Charging the battery/device at temperatures above 35 C (95 F) or below 0 C (32 F). To prevent damage, follow these precautions:

Stop charging the battery once it reaches 100% capacity; regularly or frequently charging a fully charged battery for an extended period of time may cause battery deformation or damage. We recommend that you recharge the device when the battery level drops below 70% capacity. Do not charge battery in temperatures above 35 C (95 F) or below 0 C (32 F). Charging in abnormally high or abnormally low temperatures can cause battery deformation or damage. The charging port must be clean and free from debris and should only be used with Acer charging equipment. Use of a non-Acer battery or charging equipment can cause damage to the product and will void the warranty. If you plan to store the device for a long period of time, turn-off the device, remove AC power and store the product at room temperature (0 C - 35 C) in a dry (humidity: 45% - 80%), well-

ventilated area. Avoid direct sunlight, high temperatures and high humidity. Do not leave your devices battery completely discharged for a long period of time; this may cause battery deformation or damage. We recommend that the battery is checked and charged to approximately 50% capacity every 6 months. 14 - Basic care and tips for using your computer ONLY CHARGE THE BATTERY IN A CLEAN, WELL VENTILATED AREA. Warning Batteries may explode if not handled properly. Do not disassemble or dispose of batteries in fire. Do not short external contacts, crush, puncture or otherwise tamper with batteries. Keep batteries away from children. Follow local regulations when disposing of used batteries. Precautions when replacing the battery Improper replacement or mishandling could damage the battery, cause overheating, result in injury, and risk fire or explosion. Device with built-in battery: A built-in battery must be replaced by an authorized service center. Do not attempt to replace or remove the battery by yourself. Device with removable battery: The battery should only be replaced with parts approved by Acer. Do not replace the battery with any parts other than approved ones. This notebook uses a Lithium-based battery. Do not use it in a humid, wet or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 50 C (122 F). Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will must not occur at temperatures below 0 C (32 F) or above 35 C (95 F). The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the operation time becomes noticeably shorter than normal, check an authorized reseller to purchase a new battery. Basic care and tips for using your computer - 15 Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. The capacity and lifetime of the battery will be reduced if the battery is left in hot or cold places, such as in a closed car in summer or winter. Always try to keep the battery between 15 C and 25 C (59 F and 77 F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is especially limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Wireless devices may be susceptible to interference from the battery, which could affect performance. Note Please refer to www.acer.com for battery shipping documents. Internal battery Do not attempt to replace a built-in rechargeable battery, battery replacement must be done by an Acer- authorized repair facility. Recharge the battery by following the instruction included in the product documentation. 16 - Warnings and regulatory information WARNINGS AND REGULATORY INFORMATION Optical drives CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." In case of any trouble with this device, please contact your nearest AUTHORIZED service station. To prevent direct exposure to the laser beam, do not try to open the enclosure. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. APPAREIL A LASER DE CLASSE 1 PRODUIT LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS DOUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS. LUOKAN 1 LASERLAITE LASER KLASSE 1 VORSICHT:

ABDECKUNG GEFFNET NICHT DEM STRAHLL AUSSETZEN PRODUCTO LSER DE LA CLASE I ADVERTENCIA: RADIACIN LSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE A LOS RAYOS. ADVARSEL: LASERSTRLING VEDBNING SE STRLEN. VARO! LAVATTAESSA OLET ALTTINA LASERSTEILYLLE. VARNING: LASERSTRLNING NR DENNA DEL R PPNAD L TUIJOTA STEESEENSTIRRA EJ IN I STRLEN VARNING:

PPNADSTIRRA EJ IN I STRLEN ADVARSEL: LASERSTRLING NAR DEKSEL PNESSTIRR IKKE INN I STRLEN LASERSTRLNING NAR DENNA DEL LASERSTRAHLUNG, WENN UNSICHTBARE IKKE IND R I Warnings and regulatory information - 17 Telephone line safety Disconnect all telephone lines from the equipment when not in use and/or before servicing. To avoid the remote risk of electric shock from lightning, do not connect the telephone line to this equipment during lightning or thunderstorms. Emergency calls Warning You cannot make emergency calls through this device. To make an emergency call you shall dial out through your mobile phone or other telephone call system. Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions. Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent recommendations of Wireless Technology Research. Persons with pacemakers should do the following:

Always keep the device more than 15.3 centimeters (6 inches) from research by and the pacemaker Not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it. 18 - Warnings and regulatory information Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (anti-lock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless devices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Warning Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use. Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an Warnings and regulatory information - 19 explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas

(such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Do not switch the notebook on when wireless phone use is prohibited or when it may cause interference or danger. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more from Electrical and Electronics Equipment (WEEE) regulations, visit www.acer-group.com/public/Sustainability information on the Waste ENERGY STAR Acer's ENERGY STAR qualified products save your money by reducing energy cost and protecting the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR?

Products that are ENERGY STAR qualified use less energy and prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. Acer is committed to offering products and services worldwide that help customers save money, conserve energy and improve the quality of our environment. The more energy we can save through higher energy efficiency, the more we reduce greenhouse gases and the risks to www.energystar.gov or www.energystar.gov/powermanagement. change. More information climate refers of 20 - Warnings and regulatory information Note Information in this section may not apply to your computer. Acer ENERGY STAR qualified products:

Produce less heat and reduce cooling loads, and warmer climates. Automatically go into "display sleep" and "computer sleep" within 10 and 30 minutes of inactivity respectively (Refer to the settings in Power Management). Wake the computer from sleep mode by pushing keyboard or moving mouse. Computers will save more than 80% energy at "sleep" mode. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks Wireless adapter regulatory information Radio frequency interference Warning For safety reasons, turn off all wireless or radio transmitting devices when using your laptop under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or cellular. Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used normally. To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Use on aircraft Warnings and regulatory information - 21 Warning FCC and FAA regulations may prohibit airborne operation of radio-

frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments. Ask the cabin crew before turning on your devices wireless adapter whilst on board. The wireless adapter and your health and These recommendations. The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

Using the wireless adapter on board airplanes, or Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. standards If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. USA FCC and FAA The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, 22 - Warnings and regulatory information supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:

Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. FCC radio frequency interference requirements Note Applies to device supporting IEEE 802.11a/ac wireless adapters. This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz and 5.470 to 5.725 GHz frequency ranges. FCC requires this product to be used indoors for the frequency ranges 5.15 to 5.25 GHz and 5.470 to 5.725 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. No configuration controls are provided for this wireless adapter allowing any change in the frequency of operations outside the FCC grant of authorization for U.S operation according to Part 15.407 of the FCC rules. USA Federal Communications Commission (FCC) Warnings and regulatory information - 23 Note The radiated output power of the adapter is far below the FCC radio frequency exposure limits. Nevertheless, the adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 0 cm between you

(or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at www.fcc.gov/oet/ea/ by entering the FCC ID number on the device. This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. Interference statement This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:

Reorient or relocate the receiving antenna of the equipment experiencing the interference. 24 - Warnings and regulatory information Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure FCC RF Radiation Exposure Statement:

1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance which states in DoC between the radiator and your body. Canada Industry Canada (IC) This device complies with RSS247 of Industry Canada. Cet appareil se conforme RSS247 de Canada d'Industrie. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B) Warnings and regulatory information - 25 les rduire le but de Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. La bande 5 150-5 250 MHz est rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Users are advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les utilisateurs tes aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. IC RF Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance which states in DoC between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 26 - Warnings and regulatory information Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 0 cm de distance entre la source de rayonnement et votre corps. European Union List of applicable countries This product must be used in strict accordance with the regulations and constraints in the country of use. For further information, contact the local office in the country of use. Please see https://europa.eu/

european-union/about-eu/countries_en for the latest country list. Specific absorption rate information This device meets the EU requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. The unit of measurement for the European Council's recommended limit for mobile devices is the "Specific Absorption Rate" (SAR), and the SAR limit is 2.0 W/kg averaged over 10 grams of body tissue. It meets the requirements of International Commission on Non-Ionizing Radiation Protection (ICNIRP). For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and the European Standard, for use with dedicated accessories. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines. The low band 5.15 to 5.35 GHz is for indoor use only. This equipment complies with the essential requirements of the European Union directive 2014/53/EU. See Statements of European the Union Compliance, and more details refer to the attached Declaration of Conformity. Warnings and regulatory information - 27 Italy The use of this equipment is regulated by:

1.D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and article 105 (free use) for indoor use, in both cases for private use. 2.D.M. 28.5.03, for supply to public of RLAN access to networks and telecom services. Luso degli apparati regolamentato da:

1.D.L.gs 1.8.2003, n. 259, articoli 104 (attivit soggette ad autorizzazione generale) se utilizzati al di fuori del proprio fondo e 105 (libero uso) se utilizzati entro il proprio fondo, in entrambi i casi per uso private. 2.D.M. 28.5.03, per la fornitura al pubblico dellaccesso R-LAN alle reti e ai servizi di telecomunicazioni. Belgium Dans le cas d'une utilisation prive, l'extrieur d'un btiment, au-

dessus d'un espace public, aucun enregistrement n'est ncessaire pour une distance de moins de 300 m. Pour une distance suprieure 300 m un enregistrement auprs de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT. In geval van priv-gebruik, buiten een gebouw, op een openbare plaats, is geen registratie nodig, wanneer de afstand minder dan 300 m is. Voor een afstand groter dan 300 m is een registratie bij BIPT vereist. Voor registraties en te contacteren. licenties, gelieve BIPT 28 - Warnings and regulatory information Brazil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Pakistan Pakistan Telecommunication Authority (PTA) Approved. Morocco The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant and Taza. The operation of this product in the radio channels 4, 5, 6 and 7 (2425

- 2442 MHz) is not authorized in the following cities: Aroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Bni Hafida, Cabo Negro, Casablanca, Fs, Lakbab, Marrakech, Merchich, Mohammdia, Rabat, Sal, Tanger, Tan Tan, Taounate, Tit Mellil, Zag. Japan 5 GHz Korea Taiwan

;

Warnings and regulatory information - 29 Modifications to the product Acer cannot be held responsible for unauthorized modifications made by the user and the consequences thereof, which may alter the conformity of the product. Compliant with Russian regulatory certification

 

 

2 -

Spin 1

© 2021. All Rights Reserved.

Covers: SP114-31 / SP114-31N

This revision: January 2021

Important

This manual contains proprietary information that is protected by

copyright laws. The information contained in this manual is subject to

change without notice. Some features described in this manual may not

be supported depending on the Operating System version. Images

provided herein are for reference only and may contain information or

features that do not apply to your computer. Acer Group shall not be

liable for technical or editorial errors or omissions contained in this

manual.

Register your Acer product

If your new device runs on Windows OS, you may have had your

product registered automatically while you start up your device with

Windows OS.

Log in at www.acer.com/myproducts with the email address you

registered for Windows OS to review your product record. (Reset your

password if you do not know it.)

If the record is not found, please follow the steps below to register.

1. Ensure you are connected to the Internet.

2. Go to www.acer.com/register-product.

3. Sign in or sign up for an Acer ID.

4. Enter S/N or SNID of your device to register it.

Model number: _________________________________

Serial number: _________________________________

Date of purchase: ______________________________

Place of purchase: ______________________________

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States

and other countries.

6 - First things first

F I RST T HINGS FIRST

We would like to thank you for making this Acer notebook your choice

for meeting your mobile computing needs.

Your guides

To help you use your Acer notebook, we have designed a set of

guides:

First off, the Setup Guide helps you get started with setting up your

computer.

The Quick Guide introduces you to the basic features and functions

of your new computer. For more on how your computer can help you

to be more productive, please refer to the User’s Manual. This guide

contains detailed information on such subjects as system utilities, data

recovery, expansion options and troubleshooting.

Once you have connected to the internet, you can download updates

for your computer from:

http://go.acer.com/?id=17883

1. The link will open the Acer Support webpage.

2. Scroll down to Drivers and Manuals and search for your model by

pasting in or manually entering the serial number, SNID, or

product model.

3. From this page you can also download and install the Acer

identification utility that will automatically detect your computer’s

serial number and SNID and allow you to copy it to the clipboard.

4. Once you have found your product model, any updates, or

documents will be listed.

Basic care and tips for using your computer

Turning your computer off

To turn the power off, do any of the following:

• Use the Windows shutdown command: Press the Windows key or

select the Windows Start button, select Power > Shut down.

First things first - 7

• Right-click the Windows Start button > Shut down or sign out >

Shut down.

If you need to power down the computer for a short while, but don’t

want to completely shut it down, you can put it to Sleep by doing any

of the following:

• Press the power button.

• Press the sleep hotkey.

• Press the Windows key or select the Windows Start button, select

• Right-click the Windows Start button > Shut down or sign out >

Power > Sleep.

Sleep.

Note

If you cannot power off the computer normally, press and hold the power

button for up to ten seconds to shut down the computer. If you turn off the

computer and want to turn it on again, wait at least two seconds before

powering up.

Taking care of your computer

Your computer will serve you well if you take care of it.

• Only use the adapter provided with your device, or an Acer-

approved adapter to power your device.

• Do not expose the computer to direct sunlight. Do not place it near

sources of heat, such as a radiator.

• Do not expose the computer to temperatures below 0º C (32º F) or

above 50º C (122º F).

• Do not subject the computer to magnetic fields.

• Do not expose the computer to rain or moisture.

• Do not spill water or any liquid on the computer.

• Do not subject the computer to heavy shock or vibration.

• Do not expose the computer to dust or dirt.

• Never place objects on top of the computer.

• Do not slam the computer display when you close it.

• Never place the computer on uneven surfaces.

8 - First things first

Taking care of your AC adapter

Here are some ways to take care of your AC adapter:

• Do not connect the adapter to any other device.

• Do not step on the power cord or place heavy objects on top of it.

Route the power cord and any cables away from where people walk.

• When unplugging the power cord, do not pull on the cord itself but

pull on the plug.

• The total ampere ratings of the equipment plugged in should not

exceed the ampere rating of the cord if you are using an extension

cord. Also, the total current rating of all equipment plugged into a

single wall outlet should not exceed the fuse rating.

Cleaning and servicing

When cleaning the computer, follow these steps:

1. Turn off the computer.

2. Disconnect the AC adapter.

3. Use a soft, moist cloth. Do not use liquid or aerosol cleaners.

If your computer is dropped or visibly damaged, or does not work

normally, please contact your nearest authorized Acer service center.

Guidelines for safe battery usage

Warning

When using a charging cart or a small space to simultaneously charge

or operate multiple devices , the area must be well- ventilated and the

temperature kept between 0 °C (32 °F) to 35 °C (95 °F) and battery

charging must be stopped when 100% capacity is reached.

Continuous charging can cause deformation or damage to the battery/

device.

Precautions when charging batteries

The useful lifespan of a battery is adversely affected by the following

behavior:

• Constantly charging the battery/device when already at full capacity.

First things first - 9

• Charging the battery/device at temperatures above 35 °C (95 °F) or

below 0 °C (32 °F).

To prevent damage, follow these precautions:

• Stop charging the battery once it reaches 100% capacity; regularly

or frequently charging a fully charged battery for an extended period

of time may cause battery deformation or damage. We recommend

that you recharge the device when the battery level drops below

70% capacity.

• Do not charge battery in temperatures above 35 °C (95 °F) or below

0 °C (32 °F). Charging in abnormally high or abnormally low

temperatures can cause battery deformation or damage.

• The charging port must be clean and free from debris and should

only be used with Acer charging equipment. Use of a non-Acer

battery or charging equipment can cause damage to the product

and will void the warranty.

• If you plan to store the device for a long period of time, turn-off the

device, remove AC power and store

the product at room

temperature (0 °C - 35 °C) in a dry (humidity: 45% - 80%), well-

ventilated area. Avoid direct sunlight, high temperatures and high

humidity. Do not leave your device’s battery completely discharged

for a long period of time; this may cause battery deformation or

damage. We recommend that the battery is checked and charged to

approximately 50% capacity every 6 months.

• ONLY CHARGE THE BATTERY IN A CLEAN, WELL VENTILATED

AREA.

Warning

Batteries may explode if not handled properly.

Do not disassemble or dispose of batteries in fire.

Do not short external contacts, crush, puncture or otherwise tamper

with batteries. Keep batteries away from children.

Follow local regulations when disposing of used batteries.

Precautions when replacing the battery

Improper replacement or mishandling could damage the battery,

cause overheating, result in injury, and risk fire or explosion.

10 - First things first

• Device with built-in battery: A built-in battery must be replaced by an

authorized service center. Do not attempt to replace or remove the

battery by yourself.

• Device with removable battery: The battery should only be replaced

with parts approved by Acer. Do not replace the battery with any

parts other than approved ones.

This notebook uses a Lithium-based battery. Do not use it in a humid,

wet or corrosive environment. Do not put, store or leave your product

in or near a heat source, in a high temperature location, in strong

direct sunlight, in a microwave oven or in a pressurized container, and

do not expose it to temperatures over 50 °C (122 °F).

Failure to follow these guidelines may cause the battery to leak acid,

become hot, explode or ignite and cause injury and/or damage. Do

not pierce, open or disassemble the battery. If the battery leaks and

you come into contact with the leaked fluids, rinse thoroughly with

water and seek medical attention immediately. For safety reasons,

and to prolong the lifetime of the battery, charging will must not occur

at temperatures below 0 °C (32 °F) or above 35 °C (95 °F).

The full performance of a new battery is achieved only after two or

three complete charge and discharge cycles. The battery can be

charged and discharged hundreds of times, but it will eventually wear

out. When the operation time becomes noticeably shorter than

normal, check an authorized reseller to purchase a new battery.

Use the battery only for its intended purpose. Never use any charger

or battery that is damaged. Do not short-circuit the battery. Accidental

short-circuiting can occur when a metallic object such as a coin, clip or

pen causes direct connection of the positive (+) and negative (-)

terminals of the battery. (These look like metal strips on the battery.)

This might happen, for example, when you carry a spare battery in

your pocket or purse. Short-circuiting the terminals may damage the

battery or the connecting object.

The capacity and lifetime of the battery will be reduced if the battery is

left in hot or cold places, such as in a closed car in summer or winter.

Always try to keep the battery between 15° C and 25° C (59° F and

77° F). A device with a hot or cold battery may not work temporarily,

even when the battery is fully charged. Battery performance is

especially limited in temperatures well below freezing.

First things first - 11

Do not dispose of batteries in a fire as they may explode. Batteries

may also explode if damaged. Dispose of batteries according to local

regulations. Please recycle when possible. Do not dispose as

household waste.

Wireless devices may be susceptible to interference from the battery,

which could affect performance.

Note

Please refer to www.acer.com for battery shipping documents.

Internal battery

• Do not attempt to replace a built-in rechargeable battery, battery

replacement must be done by an Acer- authorized repair facility.

Recharge the battery by following the instruction included in the

product documentation.

Y O U R A CER NOT E BOOK TOUR

After setting up your computer as illustrated in the Setup Guide, let us

show you around your new Acer computer.

12 - Your Acer notebook tour

Screen view

1

2

3

#

1

2

3

Icon

Item

Microphones

Camera

Touchscreen

Description

Internal digital microphones for sound

recording.

Camera for video communication or

taking photos.

A light next to the webcam indicates

that the webcam is active.

Displays computer output, supports

multi-touch input.

Keyboard view

Your Acer notebook tour - 13

5

Icon

Item

Speakers

Keyboard

Description

Deliver stereo audio output.

For entering data into your computer.

See "Using the keyboard" on page

17.

Fingerprint

reader (optional)

Fingerprint reader for Windows Hello

and security.

Touch-sensitive pointing device.

The touchpad and selection buttons

form a single surface.

Press down firmly on the touchpad

surface to perform a left click.

Press down firmly on the lower right

corner to perform a right click.

Remove the pen from the slot and

perform touch actions on the screen.

Touchpad

Rechargeable

active stylus

(optional)

1

2

3

4

#

1

2

3

4

5

14 - Your Acer notebook tour

Left view

1

2

3

4

5

Icon

Item

Description

DC-in jack

Connects to an AC adapter.

USB Type-C port

HDMI port

USB port with

power-off

charging

MicroSD card

reader

Connects to USB devices that adopt

the USB Type-C connector. Support

USB 3.2 Type-C, Gen 2 with transfer

speeds up to 10 Gb/s.

Supports high-definition digital video

connections.

Connects to USB devices.

Accepts one Secure Digital (microSD)

card.

Only one card can operate at a time.

#

1

2

3

4

5

USB 3.2 Gen 2 information

• USB 3.2 Gen 2 compatible ports are blue.

• Compatible with USB 3.2 Gen 2 and earlier devices.

• For optimal performance, use USB 3.2 Gen 2-certified devices.

• Defined by the USB 3.2 Gen 2 specification (SuperSpeed USB).

Your Acer notebook tour - 15

Right view

#

Icon

Item

1

2

3

4

5

6

Description

Insert the stylus into the slot

completely to start charging.

(Specifications vary depending on

model.)

Indicates the computer’s power

status.

Indicates the computer’s battery

status.

Charging: The light shows amber

when the battery is charging.

Fully charged: The light shows blue

when in AC mode.

Stylus slot

Power indicator

Battery indicator

Power button

Press to turn the computer on and off.

USB port

Connects to USB devices.

Headset/speaker

jack

Connects to audio devices (e.g.,

speakers, headphones) or a headset

with microphone.

Noble lock slot

Connects to a Noble-compatible

security lock.

1

2

3

4

5

6

USB 3.2 Gen 1 information

• USB 3.2 Gen 1 compatible ports are blue.

• Compatible with USB 3.2 Gen 1 and earlier devices.

• For optimal performance, use USB 3.2 Gen 1-certified devices.

• Defined by the USB 3.2 Gen 1 specification (SuperSpeed USB).

16 - Your Acer notebook tour

Back view

Base view

1

2

#

1

#

1

2

1

Icon

Item

Ventilation and

cooling fan

Description

Allows the computer to stay cool.

Do not cover or obstruct the

openings.

Icon

Item

Ventilation and

cooling fan

Battery reset

pinhole

Description

Allows the computer to stay cool.

Do not cover or obstruct the

openings.

Simulates removing and reinstalling

the battery.

Insert a paperclip into the hole and

press for four seconds.

U S ING T HE KE Y BOARD

Using the keyboard - 17

The keyboard has full-sized keys, a numeric keypad, separate cursor,

lock, Windows, special keys and hotkeys.

Lock keys

The keyboard has lock keys which you can use to turn keyboard

functions on and off.

Lock key

Caps Lock

Description

When Caps Lock is on, all alphabetic characters

typed are in uppercase.

Special keys

Your computer’s keyboard

functions. The function of each key is clearly marked with an icon.

includes keys

that activate special

Icon

Function

Description

Sleep

Puts the computer in Sleep mode.

Flight mode

Turns on / off the computer's network

devices.

Brightness down Decreases the screen brightness.

Brightness up

Increases the screen brightness.

Display toggle

Switches display output between the

display screen, external monitor (if

connected) and both.

Display off

Turns the display screen backlight off to

save power. Press any key to return.

Touchpad toggle Turns the built-in touchpad on and off.

Keyboard

backlight

toggle(optional)

Turns the keyboard backlight on and off.

18 - Using the keyboard

Icon

Function

Description

Speaker toggle

Turns the speakers on and off.

Volume down

Decreases the sound volume.

Volume up

Increases the sound volume.

Microphone

toggle

Turns the microphones on and off.

Prt Sc Print Screen

Take quick screen shots.

Pause

Br

Pause / Break

Sends a Break Command.

Insert

Insert

Pg Up Page up

Pg Dn Page down

Turns Insert on or off.

Scrolls up a page in a document.

Scrolls down a page in a document.

Hotkeys

To activate hotkeys, press and hold the Fn key before pressing the

other key in the hotkey combination.

Hotkey

Fn + F1-F12

Icon Function

Description

Function keys Activates the F1 to F12 keys.

Fn + Pg Up

Home

Fn + Pg Dn

End

Scrolls to the beginning of a

document.

Scrolls to the end of a

document.

Note

To swap the hotkey and special function of the F1 to F12 keys, change the

function key setting in the BIOS (to open the BIOS press F2 when starting

your computer, then select the Main menu and change Function key

behavior to Function keys).

(Specifications vary depending on model.)

Using the keyboard - 19

Windows keys

The keyboard has two keys that perform Windows-specific functions.

Key

Windows key

Application key

Description

Pressed alone it returns to the Start screen

or to return to the last open app.

This key has the same effect as clicking

the right mouse button.



 

 

 

 

 

 

 

 

 

 

 

 

 

 

Label Location Host Model Name: N20W2 The label stick on the bottom side Label (Rating) Model No.:N20W2 Label Location (RF) Contains:

FCC ID:HLZ9560NGW IC:1754F-9560NGAI

 

 

Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih New Taipei City 22181, Taiwan, R.O.C. TEL: +886-2-2696-3131 ext.3089 Fax : 886-2-8691-3120 www.acer.com Date:2011/8/22 To who may concern, I, the undersigned, responsible for the designated person in FCC grant communicator / IC company code contactor, hereby authorized RU Jan to sign the FCC / IC application form for certification process. Thank you, Sincerely Yours, Contact Person: Harriot S.L. Lee Company Name: Acer Incorporated E-Mail: harriot_lee@acer.com.tw

 

 

RF_160, Issue 04 Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 22181, Address: 134, Wu Kung Road, Wu ku Industrial Zone TW- New Taipei City 24803 Declaration of Authorization We Name: Acer Incorporated Address:

City:

Country:

Declare that:

Name Representative of agent: Jim Chang (1) New Taipei City Taiwan (R.O.C) Agent Company name: SGS Taiwan Ltd. City: New Taipei City Country: Taiwan 9560NG is authorized to apply for Certification of the following product(s):

Product description: WLAN and BT, 2x2 PCIe M.2 2230 adapter card Type designation:

FCC ID: HLZ9560NGW Validity/ expiry date on our behalf. Date: 2021/1/15 City: New Taipei City Name: RU Jan (2) Function: Manager Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

 

 

Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Requesting Class II permissive change for FCC ID: HLZ9560NGW Date: Feb. 4, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 C.C.: SGS Taiwan Limited Subject:

To Whom It May Concern:

The purpose of this letter is to request a Class II Permissive change for FCC ID:

HLZ9560NGW Original grant date: 01/11/2021 Applicant: Acer Incorporated The major change filed under this application is 1. The subject approved module is being used in different host (Portable category Configuration, Host Brand/Model: See test report). 2. SAR Testing is performed to demonstrate RF Compliance. 3. Software security remains unchanged from original application. 4. Antenna is of same type and lower gain from original approval Best Regards Title:

RU Jan / Manager On behalf of: Acer Incorporated Telephone:

886-2696-3131 ext.3289 Fax: 886-2-8691-3120 E-mail: RU.Jan@acer.com

 

 

FCC, Request for non-disclosure RF_501, Issue 6 Date: 16-Jul-10 Page 1 of 1 Company Name:

Address:

City:

Country:

Acer Incorporated 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 22181, Taiwan (R.O.C) Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: HLZ9560NGW Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: Ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. Planned Release Date STC: 180 days (notes 2, 3, 4, 5) Name and signature of applicant:

Date: Feb. 4, 2021 Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FCC, Request for non-disclosure RF_501, Issue 6 Date: 16-Jul-10 Page 1 of 1 Company Name: Acer Incorporated Address:

City:

Country:

8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 22181, Taiwan (R.O.C) To:

Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: HLZ9560NGW Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: Ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. Planned Release Date STC: 180 days (notes 2, 3, 4, 5) Date: December 30, 2020 Name and signature of applicant:

Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

 

 

Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Re: Change of Identification Authorization, FCC ID: HLZ9560NGW To Whom It May Concern:

The purpose of this letter is to apply for a change in identification as specified under 47CFR2.933 of the FCC rules, based on the original FCC ID: HLZ9560NG, grant date: 01/30/2018. The equipment bearing the modified FCC ID: HLZ9560NGW is no different from the original equipment. The original test results continue to be representative of and applicable to the equipment bearing the changed identification. Sincerely, City: New Taipei City Name: RU Jan Function: Manager Signature: