FCC ID: HLZ3165D2 WLAN+Bluetooth module 3165D2W

by: Acer Incorporated latest update: 2021-02-23 model: 3165D2

Sixteen grants have been issued under this FCC ID from 03/08/2020 to 02/23/2021 (this is one of one hundred and sixty-four releases in 2021 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked drivers, password defaults, troubleshooting guides, warrantee terms, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various TempConfidential Host UserMan Quick Guide Users Manual pdf 4.34 MiB June 02 2020 / November 30 2020 delayed release
various User Manual-1 Users Manual pdf 1.48 MiB February 23 2021 / August 23 2021 delayed release
various User Manual-2 Users Manual pdf 1.12 MiB February 23 2021 / August 23 2021 delayed release
various Internal Photos Internal Photos pdf 1.86 MiB February 23 2021 / August 23 2021 delayed release
various Internal Photos-1 Internal Photos pdf 5.05 MiB February 08 2021 / August 08 2021 delayed release
various Internal Photos-2 Internal Photos pdf 2.02 MiB February 08 2021 / August 08 2021 delayed release
various TempConfidential IntPho Internal Photos pdf 4.22 MiB June 02 2020 / November 30 2020 delayed release
various External Photos External Photos pdf 933.01 KiB February 23 2021 / August 23 2021 delayed release
various External photo External Photos pdf 36.80 KiB March 06 2020 / March 08 2020
various TempConfidential ExtPho External Photos pdf 2.75 MiB June 02 2020 / November 30 2020 delayed release
various Host Label Info ID Label/Location Info pdf 48.68 KiB June 02 2020 / June 03 2020
various ID Label and Location ID Label/Location Info pdf 1.37 MiB February 23 2021
various Label info ID Label/Location Info pdf 138.00 KiB March 06 2020 / March 08 2020
various C2PC Request Letter Cover Letter(s) pdf 16.03 KiB February 23 2021
various Declaration Letter DTS and NII device Cover Letter(s) pdf 1003.01 KiB February 23 2021
various Declaration Letter models difference Cover Letter(s) pdf 10.54 KiB February 23 2021
various FCC Software Configuration Control Declaration Cover Letter(s) pdf 11.84 KiB February 23 2021
various LTCR Letter Cover Letter(s) pdf 15.86 KiB February 23 2021
various Power of Attorney Letter Cover Letter(s) pdf 20.15 KiB February 23 2021
various STCR Letter Cover Letter(s) pdf 37.32 KiB February 23 2021
various SAR Report RF Exposure Info pdf 3.61 MiB February 23 2021
various Test Setup Photos SAR Test Setup Photos pdf 76.90 KiB February 23 2021 / August 23 2021 delayed release
various SAR Report Test Report pdf 3.62 MiB February 23 2021
various Software Security SDR Software/Security Inf pdf February 23 2021 confidential
various SAR Report-1 RF Exposure Info pdf 3.91 MiB February 08 2021
various SAR Report-2 RF Exposure Info pdf 4.56 MiB February 08 2021
various SAR report-1 re RF Exposure Info pdf 3.91 MiB February 19 2021 / February 08 2021
various SAR report-2 re RF Exposure Info pdf 4.56 MiB February 19 2021 / February 08 2021
various Confidential Host TunePro Parts List/Tune Up Info pdf June 02 2020 confidential
various Confidential KDB 594280 D02 SW Security Operational Description pdf June 02 2020 confidential
various Confidential OpDes Host Antenna Operational Description pdf June 02 2020 confidential
various FCC RFExp 20200527 RF Exposure Info pdf 1.18 MiB June 02 2020 / June 03 2020
various FCC RFExp Appendix A RF Exposure Info pdf 2.35 MiB June 02 2020 / June 03 2020
various FCC RFExp Appendix B RF Exposure Info pdf 902.90 KiB June 02 2020 / June 03 2020
various FCC RFExp Appendix C RF Exposure Info pdf 3.29 MiB June 02 2020 / June 03 2020
various cvltr FCC Authorization letter acer to Sporton Cover Letter(s) pdf 36.02 KiB June 02 2020 / June 03 2020
various cvltr FCC C2PC Request 20200527 Cover Letter(s) pdf 135.36 KiB June 02 2020 / June 03 2020
various cvltr FCC Confidentiality Request Cover Letter(s) pdf 53.55 KiB June 02 2020 / June 03 2020
various cvltr FCC Letter of Authorization Cover Letter(s) pdf 18.68 KiB June 02 2020 / June 03 2020
various TempConfidential Tsup FCC RFExp Test Setup Photos pdf 75.23 KiB June 02 2020 / November 30 2020 delayed release
various FCC Auth Ltr Change of ID Cover Letter(s) pdf 47.40 KiB March 06 2020 / March 08 2020
various Power of Attorney Letter Cover Letter(s) pdf 34.64 KiB March 06 2020 / March 08 2020
various TempConfidential Host UserMan Quick Guide Users Manual pdf 4.34 MiB June 02 2020 / November 30 2020 delayed release
various User Manual-1 Users Manual pdf 1.48 MiB February 23 2021 / August 23 2021 delayed release
various User Manual-2 Users Manual pdf 1.12 MiB February 23 2021 / August 23 2021 delayed release
various Internal Photos Internal Photos pdf 1.86 MiB February 23 2021 / August 23 2021 delayed release
various Internal Photos-1 Internal Photos pdf 5.05 MiB February 08 2021 / August 08 2021 delayed release
various Internal Photos-2 Internal Photos pdf 2.02 MiB February 08 2021 / August 08 2021 delayed release
various TempConfidential IntPho Internal Photos pdf 4.22 MiB June 02 2020 / November 30 2020 delayed release
various External Photos External Photos pdf 933.01 KiB February 23 2021 / August 23 2021 delayed release
various External photo External Photos pdf 36.80 KiB March 06 2020 / March 08 2020
various TempConfidential ExtPho External Photos pdf 2.75 MiB June 02 2020 / November 30 2020 delayed release
various Host Label Info ID Label/Location Info pdf 48.68 KiB June 02 2020 / June 03 2020
various ID Label and Location ID Label/Location Info pdf 1.37 MiB February 23 2021
various Label info ID Label/Location Info pdf 138.00 KiB March 06 2020 / March 08 2020
various C2PC Request Letter Cover Letter(s) pdf 16.03 KiB February 23 2021
various Declaration Letter DTS and NII device Cover Letter(s) pdf 1003.01 KiB February 23 2021
various Declaration Letter models difference Cover Letter(s) pdf 10.54 KiB February 23 2021
various FCC Software Configuration Control Declaration Cover Letter(s) pdf 11.84 KiB February 23 2021
various LTCR Letter Cover Letter(s) pdf 15.86 KiB February 23 2021
various Power of Attorney Letter Cover Letter(s) pdf 20.15 KiB February 23 2021
various STCR Letter Cover Letter(s) pdf 37.32 KiB February 23 2021
various SAR Report RF Exposure Info pdf 3.61 MiB February 23 2021
various Test Setup Photos SAR Test Setup Photos pdf 76.90 KiB February 23 2021 / August 23 2021 delayed release
various SAR Report Test Report pdf 3.62 MiB February 23 2021
various SAR Report-1 RF Exposure Info pdf 3.91 MiB February 08 2021
various SAR Report-2 RF Exposure Info pdf 4.56 MiB February 08 2021
various SAR report-1 re RF Exposure Info pdf 3.91 MiB February 19 2021 / February 08 2021
various SAR report-2 re RF Exposure Info pdf 4.56 MiB February 19 2021 / February 08 2021
various FCC RFExp 20200527 RF Exposure Info pdf 1.18 MiB June 02 2020 / June 03 2020
various FCC RFExp Appendix A RF Exposure Info pdf 2.35 MiB June 02 2020 / June 03 2020
various FCC RFExp Appendix B RF Exposure Info pdf 902.90 KiB June 02 2020 / June 03 2020
various FCC RFExp Appendix C RF Exposure Info pdf 3.29 MiB June 02 2020 / June 03 2020
various cvltr FCC Authorization letter acer to Sporton Cover Letter(s) pdf 36.02 KiB June 02 2020 / June 03 2020
various cvltr FCC C2PC Request 20200527 Cover Letter(s) pdf 135.36 KiB June 02 2020 / June 03 2020
various cvltr FCC Confidentiality Request Cover Letter(s) pdf 53.55 KiB June 02 2020 / June 03 2020
various cvltr FCC Letter of Authorization Cover Letter(s) pdf 18.68 KiB June 02 2020 / June 03 2020
various TempConfidential Tsup FCC RFExp Test Setup Photos pdf 75.23 KiB June 02 2020 / November 30 2020 delayed release
various FCC Auth Ltr Change of ID Cover Letter(s) pdf 47.40 KiB March 06 2020 / March 08 2020
various Power of Attorney Letter Cover Letter(s) pdf 34.64 KiB March 06 2020 / March 08 2020

frequency equipment class purpose
1 2021-02-23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 2422 ~ 2452 DTS - Digital Transmission System
3 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
4 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
6 2422 ~ 2452 DTS - Digital Transmission System
7 2021-02-08 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
8 2422 ~ 2452 DTS - Digital Transmission System
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2020-06-03 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 2422 ~ 2452 DTS - Digital Transmission System
13 2020-03-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
14 JBP - Part 15 Class B Computing Device Peripheral
15 2422 ~ 2452 DTS - Digital Transmission System
16 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2021-02-23
various 2021-02-08
various 2020-06-03
various 2020-03-08
various Applicant's complete, legal business name Acer Incorporated
various FCC Registration Number (FRN) 0013355508
various Physical Address 8F, 88, Sec 1, Hsin Tai Wu Rd
various Hsichih, Taipei Hsien, N/A
various Hsichih, Taipei Hsien
various Taiwan
app s TCB Information
various TCB Application Email Address v******@nemko.com
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code HLZ
various Equipment Product Code 3165D2
app s Person at the applicant's address to receive grant or for contact
various Name H******** S******** L******
various Title Manager
various Telephone Number 886-2******** Extension:
various Fax Number 886-2********
various E-mail H******@acer.com.tw
app s Technical Contact
various Firm Name Sporton International Inc
various Sporton International Inc.
various Name J******** T****
various Physical Address No.52, HwaYa 1st Rd., Guishan Dist.
various Taoyuan City
various Taiwan
various Telephone Number 886-3********
various E-mail J******@sporton.com.tw
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)08/23/2021
various08/08/2021
various11/30/2020
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)WLAN+Bluetooth module 3165D2W
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeLimited Single Modular Approval
variousSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body and simultaneous SAR values are: 0.01 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Notebook Computer, model: N19E3, Acer ENDURO N7, EN715-51W, as documented in this filing.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.66 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Notebook Computer, model: N19E2, Acer ENDURO N7, EN714-51W, as documented in this filing. The highest reported SAR for body exposure conditions is 0.22 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.36 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Notebook Computer, model: N19E3, Acer ENDURO N7, EN715-51W, as documented in this filing. The highest reported SAR for body exposure conditions is 1.15 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body and simultaneous SAR values are: 0.01 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Notebook Computer, model: N19E2, Acer ENDURO N7, EN714-51W, as documented in this filing.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.36 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Notebook Computer, model: N19E2, Acer ENDURO N7, EN714-51W, as documented in this filing. The highest reported SAR for body exposure conditions is 0.28 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.66 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Notebook Computer, model: N19E3, Acer ENDURO N7, EN715-51W, as documented in this filing. The highest reported SAR for body exposure conditions is 0.15 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.36 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Tablet, model: N19E1, Acer ENDURO T5, ET510-51W, as documented in this filing. The highest reported SAR for body exposure conditions is 1.43 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.66 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Tablet, model: N19E1, Acer ENDURO T5, ET510-51W, as documented in this filing. The highest reported SAR for body exposure conditions is 1.34 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body and simultaneous SAR values are: 0.01 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules. Class II Permissive Change: Limited Single Modular Approval, to reduce the power, disable MIMO mode and address RF Exposure in the portable configuration host of Acer Tablet, model: N19E1, Acer ENDURO T5, ET510-51W, as documented in this filing.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of Acer tablet PC, model number: A9002, ET110-31W, FCC ID: HLZA9002. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 0.72 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of Acer tablet PC, model number: A9002, ET110-31W, FCC ID: HLZA9002. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.72 W/kg respectively.  
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of Acer tablet PC, model number: A9002, ET110-31W, FCC ID: HLZA9002. The highest reported Body and Simultaneous SAR values are 0.35 W/kg and 0.35 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body and simultaneous SAR values are: 0.01 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.66 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.36 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Shenzhen NTEK Testing Technology Co., Ltd.
various SPORTON International Inc.
various National Technical Systems
various Name A****** L********
various A******** C****
various D******** B******
various Telephone Number +86-7********
various 886-3******** Extension:
various 510-5********
various Fax Number 886-3********
various 510 5********
various E-mail c******@ntek.org.cn
various a******@sporton.com.tw
various d******@nts.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.003
2 2 15C CC 2412 2462 0.192
2 3 15C CC 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC 5180 5240 0.046
3 2 15E CC 5190 5230 0.081
3 3 15E CC ND 5260 5320 0.093
3 4 15E CC ND 5270 5310 0.098
3 5 15E CC ND 5500 5720 0.096
3 6 15E CC ND 5530 5690 0.105
3 7 15E CC 5745 5825 0.1
3 8 15E CC 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC 5180 5240 0.046
5 2 15E CC 5190 5230 0.081
5 3 15E CC ND 5260 5320 0.093
5 4 15E CC ND 5270 5310 0.098
5 5 15E CC ND 5500 5720 0.096
5 6 15E CC ND 5530 5690 0.105
5 7 15E CC 5745 5825 0.1
5 8 15E CC 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.003
6 2 15C CC 2412 2462 0.192
6 3 15C CC 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC 5180 5240 0.046
7 2 15E CC 5190 5230 0.081
7 3 15E CC ND 5260 5320 0.093
7 4 15E CC ND 5270 5310 0.098
7 5 15E CC ND 5500 5720 0.096
7 6 15E CC ND 5530 5690 0.105
7 7 15E CC 5745 5825 0.1
7 8 15E CC 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.003
8 2 15C CC 2412 2462 0.192
8 3 15C CC 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5180 5240 0.046
10 2 15E CC MO 5190 5230 0.081
10 3 15E CC MO ND 5260 5320 0.093
10 4 15E CC MO ND 5270 5310 0.098
10 5 15E CC MO ND 5500 5700 0.096
10 6 15E CC MO ND 5530 5690 0.105
10 7 15E CC MO 5745 5825 0.1
10 8 15E CC MO 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402 2480 0.003
12 2 15C CC MO 2412 2462 0.192
12 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.003
15 2 15C CC MO 2412 2462 0.192
15 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC MO 5180 5240 0.046
16 2 15E CC MO 5190 5230 0.081
16 3 15E 38 CC MO ND 5260 5320 0.093
16 4 15E 38 CC MO ND 5270 5310 0.098
16 5 15E 38 CC MO ND 5500 5720 0.096
16 6 15E 38 CC MO ND 5530 5690 0.105
16 7 15E 38 CC MO 5745 5825 0.1
16 8 15E 38 CC MO 5755 5795 0.101

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC