ADV10PS2 10.2" OVERHEAD LCD MONITOR WITH SONY PS2 PLAYER MENU / ENTER R OPERATION MANUAL 128-8669 Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants. If you have any questions regarding wire routing in a vehicle, please contact Audiovox Technical Support at 1-800-225-6074. Important Notice When connecting power and ground in a mobile video installation ensure that the ACC wire is fused at the point where it is connected to the vehicle ACC wiring. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the mobile video product. An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in park or when the vehicle's parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver's seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle's battery. Do not put pressure on the screen. Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Licensed under one or more of the following patents, Patent NOS. 5,775,762 and 5,927,784 Congratulations Congratulations on your purchase of the ADVENT ADV10PS2 Player with Drop-Down Video / Monitor. The ADV10PS2 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment. Please note: Installation options vary, see the individual owner's manuals for each component in your system to obtain a full understanding of each component's operation. Safety Precaution For safety reasons, when changing video media it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. System adjustments can be accomplished using the remote control, while seat-belts remain fastened. Enjoy your ADVENT entertainment system but remember the safety of all passengers remains the number one priority. FEATURES 10.2 TFT (Thin Film Transistor) Active Matrix LCD
(Liquid Crystal Display) Monitor Built-in SONY PS2 Player OSD (On Screen Display) for Control of Picture Quality and Functions Single Channel Infrared Transmitter for IR Wireless Headphones Four Audio/Video Source Inputs (AV1, AUX, PS2). Dome Lights with 3-Position Switch. Built-in 16 Channel Frequency Wireless FM Modulator. Screen Mode Selection (4:3, 16:9) SONY PS2 Wireless Game Controller Full Function Remote Control Backlit Controls AV Output Via RCA Pigtail Playing DVD, CD and SONY PS2 Games. 3 CONTROLS AND INDICATORS DIAGRAM
(FRONT VIEW) 7 456 3 2 1 MENU / ENTER MEMORY CARD MEMORY CARD RESET I /
FORCE LINK FORCE LINK 8 9 10 11 12 1. SOURCE Button (S) Use to select the sources: AV1, AUX and PS2. 2. CURSOR Button (pqtu) Use these buttons to access menu selections on the screen. 3. MENU/ENTER Button Use these buttons to access SYSTEM MENU. 4. Infrared Transmitter and Sensor Transmits audio to wireless headphones, allows the remote control to operate the unit and to control other accessories in the system. 5. POWER Button ( ) Used to turn the system on/off (standby). 6. Dome Lights Provide additional interior illumination. 7. Three Position Dome Light Switch ON - Turns on the dome lights. OFF - The dome lights will not turn on in this position. AUTO - Automatically switches on the dome lights in Conjunction with the vehicle's interior illumination. 8. PS2 CONSOLE 9. MEMORY CARD SLOT 1 & MEMORY CARD 2 10. PS2 WIRELESS FORCE 2 CONTROLLER 13 14 15 16 4 11. LCD Panel 12. Screen Release Press to release the screen. 13. LCD Cut Off Switch Used to turn off the LCD backlit when the LCD is in the closed position. CONTROL FUNCTION DESCRIPTION
(SIDE VIEW) 1 2 3 4 R AUDIO L VIDEO 14. OPEN Push to open the PS2 tray. 15. OPEN () The disc tray opens. 16. RESET ( ) ON/Standby and RESET indicator. 1. HEADPHONE JACK The jack is applicable for wired headphone with a 1/8
(3.5mm) plug to listen audio output. 2. Auxiliary Audio Right Input 3. Auxiliary Audio Left Input 4. Auxiliary Video Input 5 REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION Back View P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 M1 M2 M3 M4 M5 M6 OPEN/
CLOSE AUDIO SHUFFLE ANGLE PROGRAM SUBTITLE REPEAT 1 4 7 SLOW CLEAR RESET 3 6 9 TIME 2 5 8 0 SCAN PREV NEXT A-B PLAY PAUSE STOP DISPLAY TOP MENU MENU RETURN ENTER L1 L2 L3 R3 SELECT START R1 R2 MUTE SOURCE DISPLAY FMM ON/OFF FMM SELECT SYSTEM MENU IR ON/OFF VOLUME PIX ENTER DVD /PLAYSTATION P37 P36 P35 P34 P33 P32 P31 P30 P29 P28 P27 P26 P25 P24 P23 P22 M11 M10 M9 M8 M7 6 Battery Cover Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using your finger, slide the battery cover off in the direction of the arrow. 2) Install Two AAA batteries. Make sure that proper polarity 3) Align the cover tabs with the remote control and slide the
(+ or -) is observed. cover until it locks. The remote control will operate the unit. It is not a universal remote control and will not control equipment from other manufacturers.
* P1 ~ P37: SONY PS2 console (refer the SONY PS2 manual for detail).
* M1~ M11: Overhead LCD Monitor. P1. OPEN / CLOSE To open and close the disc tray. P2. AUDIO Displays and changes audio options on DVDs with multiple audio tracks. P3. SHUFFLE Begins playback of titles or chapters in a random order. P4. ANGLE Display and changes viewing angles on DVDs recorded with multi-angle options. P5. PROGRAM Begins playback of titles or chapters in a programmed sequence. P6. SUBTITLE Displays and changes subtitle options on DVDs with subtitle options. P7. REPEAT Selects repeated playback of all the titles on the disc, or one title or one chapter. P8. SLOW ( / ) Changes to playback/reverse playback in slow-motion. P9. SCAN ( / ) Fast reverse / forwards playback. 7 P10. PLAY Starts playback. P11. DISPLAY Display the control panel. P12. TOP MENU Display the DVD-Video menu. P13. BUTTON: DVD MENU Select the item want to change. P14. ENTER Used to implement a selected setting or menu option. P15. BUTTON: TITLE MENU Select the title want to play. P16. DIRECTIONAL BUTTONS: CURSOR CONTROL Use these buttons to access menu selection on the screen. P17. L3 BUTTON Display Subtitle Options, to select the subtitle language, and turn it on or off. P18. L1 BUTTON Previous (9), press to return to the previous chapter or track. P19. L2 BUTTON Search ( ), fast reverse forwards playback. 8 P20. SELECT Display the control panel. P21 START Play / Pause. P22. R2 BUTTON Search ( ), forwards playback P23. R1 BUTTON Next (:), press to skip to the next chapter or track. P24. R3 BUTTON Display Audio Options, press the language changes. P25. BUTTON: ENTER P26. BUTTON: CANCEL /<(Stop) P27. MENU Display the DVD-Video Menu. P28. RETURN Returns to the previously selected screen within the DVDs menu. P29. PAUSE Pauses playback. P30. STOP Stop playback. Selecting <(stop) again after playback is stopped clears resume play (playback from the last stopping point). 9 P31. PREVIOUS(9) / NEXT (:) Return/skips to the beginning of the current, previous or next chapter. P32. A-B REPEAT Specifies a scene for playback, and starts playback of the scene that has been set. P33. CLEAR Clears selected numbers or playback modes. P34. TIME Display the current title or chapter number, the elapsed time, etc. P35. NUMBER 0~9 Used to the enter the number of a chapter. P36 STANDBY / RESET Turn the Power On/OFF M1. POWER Press this button to turn the unit ON and OFF. M2. MUTE Press this button to mute the audio. Pressing the button again restores the sound to the previously set level. M3. FMM ON/OFF Turns the wireless FM Modulator ON or OFF. M4 FMM SELECT Select the FM Modulator Frequency. 10 M5. SYSTEM MENU Allows the user to access the main menu. M6. IR ON/OFF Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone. M7. CURSOR BUTTON (pqtu) Use these buttons to access menu selections on the screen. M8. ENTER Used to implement a selected setting or menu option. M9. VOLUME ( PIX + ) Each time this button is pressed, the OSD will display the adjustment bars for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the ("+" / "") buttons to adjust the setting. The display will automatically turn off if no adjustments are made after 6 seconds, or if any other button is pressed. M10. SOURCE Each time the button is pressed, the audio/video source will change: AV1, AUX, PS2. M11. DISPLAY Press to display current information. 11 SYSTEM MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the screen mode display, OSD language and source default. 1) Press the MENU/ENTER button on unit to enter System Menu, the main page of the system menu will appear on screen. 2) Use the cursor buttons p or q to select the desired item in the main page and press the MENU/ENTER button to select. 3) The sub menu will appear on screen. 4) Use the cursor buttons p or q to select an item in the sub menu and then press the MENU/ENTER button to select. 5) 6) Press and hold the MENU/ENTER button to exit System Menu. Use the cursor buttons t or u to adjust picture control and press the MENU/ENTER button to confirm setting. Note: System Menu can be controlled via unit and remote control. (Items selected in the menu will have a green background) PICTURE CONTROL SELECT When watching program, the picture quality can be adjusted to suit satisfactory. 1) Each time this button is pressed, the on screen picture adjustment displays the adjustment for BRIGHTNESS, CONTRAST, COLOR, TINT (for NTSC only) or RESET. 2) Once the desired adjustment bar is displayed, use the Volume(+)/Volume(-)button to adjust the setting. The display will automatically turn off if no adjustment are made within 6 seconds, or is any other button is pressed. 3) Press the qbutton four time to select RESET, then press either Volume(-)or the Volume(+)button on the remote or the main unit and all of the picture settings (BRIGHTNESS, CONTRAST, COLOR and TINT)will return to the factory setting. SYSTEM MENU PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE PICTURE CONTROL 16 CONTRAST BRIGHTNESS CONTRAST COLOR TINT RESET 12 FMM SELECT FMM ON/OFF options - Turns the wireless FM Modulator on or off. FMM SELECT option - Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, Ch15 90.9MHz, CH16 91.1MHz) SYSTEM MENU PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE FMM FMM ON FMM OFF FMM SELECT OSD LANGUAGE This allows the user to select the language for the on-screen display. The user can either select English, Spanish, French, German for the OSD language. SYSTEM MENU PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE OSD LANGUAGE ENGLISH SPANISH FRENCH GERMAN 13 SOURCE DEFAULT PS2 This allows the user to set the system default source to PS2 (via System Menu). Note:
If selected default source is set to PS2 every time the units power is cycled with the source set to something other then PS2, the unit will power up and automatically switch the source over to PS2. Unit will be set to Last Memory on as the default mode of operation. Selection of Source default can only be made from within the system menu. SYSTEM MENU PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE SOURCE DEFAULT PS2 ON OFF SCREEN MODE SELECT This allows the user to change the screen format (aspect ratio 4:3, 16:9). To select the screen aspect ratio format highlight SCREEN MODE and press MENU/ENTER button to enter the submenu. Then press the Cursor button p or q to select from 4:3 or 16:9. Press MENU/ENTER button to confirm the setting. SYSTEM MENU PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE SCREEN MODE 4:3 16:9 14 TURNING THE UNIT ON OR OFF 1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture quality. 4. Remember to turn the unit off and pivot the LCD to the locked position when not in use. Power ON/OFF Button Remote Sensor Infrared Transmitter MENU / ENTER Screen Release 15 OVERHEAD DOME LIGHTS The Dome Lights integrated into the unit are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle's interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle's interior lighting. Refer to the Installation Guide for wire connections. Do not leave the vehicle unattended with the dome light switch in the ON position, as this could result in a discharged battery. ACCESSORIES WIRELESS HEADPHONES The unit includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your wireless headphones. WIRED HEADPHONES (OPTIONAL) There is one 1/8 headphone jack on the unit that can be used with any standard wired stereo headphones with a 1/8 plug. This jack is controlled by the volume up/down buttons on the remote control. 16 SOURCE FEATURE AV1 The AV1 input may be connected to a external video source, video game system, or other audio / video devices. To access the audio / video inputs, turn the unit on and press the S (source) button or the Source button on the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power button or remote control and it is now ready to play the audio and video signals from the source connected . Note: AV1 sources are available only if pre-installed during your video product installation. AUX The AUX input may be connected to a external video source, video game system, or other audio / video devices. To access the audio / video inputs, turn the unit on and press the S (source) button or the Source button on the remote control until "AUX" is displayed on the screen. PS2 Press the units SOURCE button till the screen displays PS2. Press ( ) RESET on unit/remote control to turn ON the PS2 Console. 17 TROUBLESHOOTING PROBLEM IR remote inoperative Disc won't play SOLUTION Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. Insert a disc with the label side facing up. Check the type of disc you put into disc tray. This PS2 only plays PS2 GAME, DVDs, audio CDs. Both the unit and the disc are coded by region. If the regional codes dont match, the disc cant be played. Play starts, but then stops immediately The disc is dirty. Clean it. Condensation has formed. Allow player to dry out. No sound or distorted sound Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. Make sure the Modulator is ON and the proper Frequency has been selected. Make sure that unit is using Single Channel Headphones. Cant advance through a movie It cant advance through the opening credits and warning information that appear at the beginning of movies because the disc is programmed to prohibit that action. 18 PROBLEM Not allowed at the moment Picture is distorted No forward or reverse scan SOLUTION The feature or action cannot be completed at this time because:
1. The discs software restricts it. 2. The discs software doesnt support the feature (e.g., angles) 3. The feature is not available at the moment. 4. 4 title or chapter number that is out of range. The disc might be damaged. Try another disc. It is normal for some distortion to appear during forward or reverse scan. Some discs have sections that prohibit rapid scanning or title and chapter skip. If you try to skip through the warning information and credits at the beginning of a movie, you wont be able to. This part of the movie is often programmed to prohibit skipping through it. 19 REPLACEMENT PARTS SPECIFICATIONS Remote Control 136-4926 LCD Backlighting LED Resolution Pixels 800 x 400 960,000 Operation Temperature 32 ~131 F (0 ~ 50 C) Storage Temperature
-4 ~ 158 F (-20 ~ 70 C) Backlit life 10,000 Hours Video Display System NTSC / PAL Headphone Audio Output 0.03W @ 32 ohms Video Output Power Source Dimension 1.0Vp-p @ 75 ohms 12V DC L x W x H 12" x 12" x 2.5"
315mm x 315mm x 64.5mm Specifications subject to change without notice. 20 ADVENT LIMITED WARRANTY Applies to ADVENT Mobile Video Products R AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that, should this product or any part thereof
(except game controllers), under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor. If your new vehicles radio, CD/DVD player is covered by the manufacturers warranty for a period of 48 months as set forth in the OEM Warranty Booklet, the company will extend the Advent Mobile Video product warranty for the same period of time. This is not applicable to extended warranty purchases beyond the original manufacturers warranty. A game controller, if supplied, is similarly warranted for ninety (90) days. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to digital memory/media devices, gaming devices, discs, speakers, accessories, or vehicle electrical systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITH IN A PERIOD NOT EXCEEDING 12 MONTHS AFTER EXPIRATION OF THE WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 1-800-645-4994 128-7188B 21 2009 ADVENT,150 Marcus Blvd. Hauppauge, NY 11788 128-8669