FCC ID: ATI9R3VOD129 DVD PLAYER WITH 12.1" LCD Monitor

VOD129 12.1" OVERHEAD LCD MONITOR WITH DVD PLAYER OPERATION MANUAL XXX-XXXX Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in "park" or when the vehicle's parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver's seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle's battery. Do not put pressure on the screen. Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Licensed under one or more of the following patents, Patent NOS. 5,775,762 and 5,927,784 Congratulations Congratulations on your purchase of the AUDIOVOX VOD129 DVD Player with Drop-Down Video / Monitor. The VOD129 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment. Please note: Installation options vary, see the individual owner's manuals for each component in your system to obtain a full understanding of each component's operation. Safety Precaution For safety reasons, when changing video media it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. System adjustments can be accomplished using the remote control, while seat-belts remain fastened. Enjoy your AUDIOVOX entertainment system but remember the safety of all passengers remains the number one priority. FEATURES 12.1 TFT (Thin Film Transistor) Active Matrix LCD

(Liquid Crystal Display) Monitor Built-in DVD Player OSD (On Screen Display) for Control of Picture Quality and Functions Single Channel Infrared Transmitter for IR Wireless Headphones Four Audio/Video Source Inputs (DVD/USB, AV1, AUX and GAME). Dome Lights with 3-Position Switch. Built-in 16 Channel Frequency Wireless FM Modulator. Last Position Memory for DVD. Screen Mode Selection (4:3, 16:9) Wireless Game Controller Full Function Remote Control Backlit Controls AV Output Via RCA Pigtail Playing DVD, CD and MP3 Disc. 3 CONTROLS AND INDICATORS DIAGRAM

(FRONT VIEW) 6 5 4 3 2 1 7 8 9 10 11 12 13 1. EJECT () Control This control is used for ejecting discs from the disc compartment. (Note: Disc can be ejected with the unit turned Off. Vehicle ignition must be in Run or ACC position). After the Disc is removed the unit will turn Off after 15-20 seconds. 2. STOP (n) Control

- Touch STOP once : Stops playback, touching the PLAY button again will resume normal playback.

- Touch STOP twice : To stop playback. 3. PLAY (u) Control This control is used to start playback of a disc. 4. Source Select Use to select one of the four sources: DVD/USB, AV1, AUX and GAME 5. FMM Source Select Control Used to select the frequency in sequence rotation:

FMM OFF, CH1 88.1MHZ, CH2 88.3MHZ, CH3 88.5MHZ, CH4 88.7MHZ, CH5 88.9MHZ, CH6 89.1MHZ, CH7 89.3MHZ, CH8 89.5MHZ, CH9 89.7MHZ, CH10 89.9MHZ, CH11 90.1MHZ, CH12 90.3MHZ, CH13 90.5MHZ, CH14 90.7MHZ, CH15 90.9MHZ, CH16 91.1MHZ. 6. POWER ( ) Control Used to turn the system on/off. 7. Dome Lights Provide additional interior illumination. 4 CONTROL FUNCTION DESCRIPTION

(FRONT VIEW) 8. Infrared Transmitter and Sensor Transmits audio to wireless headphones. Also allows the remote control to operate the VOD129 and to control other accessories in the system. 9. Three Position Dome Light Switch ON - Turns on the dome lights. OFF - The dome lights will not turn on in this position. AUTO - Automatically switches on the dome lights in Conjunction with the vehicle's interior illumination. 10. Ventilation Openings 11. LCD Cut Off Switch Used to turn off the LCD panel monitor backlit when in the closed position. 12. LCD Panel 13. Screen Release Press to release the screen. CONTROL FUNCTION DESCRIPTION

(SIDE VIEW) 1 2 3 4 1. DVD Disc insertion Slot For loading and removing discs. Unit will turn On and load disc when disc is inserted. Insert disc with label side facing up. Note: Disc slot will be lit when unit is turned Off for easy loading at night. CONTROL FUNCTION DESCRIPTION

BACK VIEW) 1 2. USB INPUT FOR USB THUMB DRIVE 3. AUX IN The Jack is applicable for audio and video input. 4. HEADPHONE JACK The jack is applicable for wired headphone with a 1/8 (3.5mm) plug to listen audio output. 1. REAR IR SENSOR 5 REMOTE CONTROL OPERATION MAIN FUNCTION OPERATION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 POWER EJECT M1 M2 SOURCE TV DVD MUTE DVD SOURCE VOLUME PIX SYSTEM MENU DISC MENU ZOOM REPEAT ENTER DISPLAY SETUP SUBTITLE AUDIO 4 8 IRT ON/OFF 1 5 FMM ON/OFF 2 6 9 3 7 0 30 29 28 27 26 25 24 23 22 21 20 19 18 17 CR2025 Initial Use When purchased the remote control has a battery installed with a Pull Tab to prevent battery discharge. Remove the Pull Tab before attempting to use the remote. Battery Replacement 1. Remove the battery holder. 2. Insert the battery into the battery holder and insert the battery holder into the remote. Be sure to observe the correct polarity. 3. Align the battery holder with the remote control and push until the holder clicks. 6

* Function control is available on the unit and the Remote Control.

** Function not available in this model. 1. POWER*

Press this button to turn the unit ON and OFF. 2. MONITOR SELECT M1 Button Sets the remote control code to allow control of the unit set to M1 mode. M2 Button** Sets the remote control code to allow control of the unit set to M2 mode. 3. SOURCE*

Each time the button is pressed, the change mode as DVD/USB, AV1, AUX and GAME 4. TV Mode Select Switches certain function keys on the remote control for monitor functions. 5. DVD Source This button is only active when remote control is in DVD mode. Each time the buttons is pressed one of the source (DVD and USB) will be selected. If the USB are not plugged in, it will remain on DVD Source. Press to change source in sequence of DVD > USB. 6. 7. 8. PIX ( Picture Select ) Each time this button is pressed, the OSD picture adjustment displays the Adjustment bar for BRIGHTNESS, CONTRAST, COLOR, TINT(For NTSC only) or RESET. Once the desired adjustment bar is displayed, use the VOLUME+/ VOLUME button to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed. SYSTEM MENU Allow the user to access the system menu. Press cursor (pq) buttons to select desired picture control FMM screen mode, OSD language and source default during power up. CURSOR (pqtu) Use these buttons to access menu selections on the screen. 7 9. ENTER Used to implement a selected setting or menu option. 10. DISPLAY Press to display the current disc information while the disc is playing. Press the cursor (pq) buttons to select the Title or Chapter. For Title/Chapter selection use the numeric buttons to enter the desired Title Chapter selection. 11. SCAN BACKWARD (7) Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 times the normal speed. 12. PLAY*

Press to activate the play mode while a disc is loaded in the disc compartment. 13. PREVIOUS (9) Press to return to the previous chapter or track. 14. PAUSE (II) Press to pause playback. 15. NUMBERS Allow the user to ENTER the numbers 0-9 for selection of the tracks, titles chapters or password setting. 16. FMM ON/OFF Turns the FM Modulator power on/off. 17. IRT ON/OFF (Optional) Turns the Infrared Transmitter IRT ON or OFF for IR Wireless Headphones. 18. NEXT (:) Press to skip to the next chapter or track. 8 19. STOP (<)*

Press to stop playback.(It can be resumed playback). Press twice at once to stop playback fully. 20. SCAN FORWARD (8) Press to search in a forward direction. Press repeatedly to change the search Speed from 2, 4, 8, 16 times the normal speed. 21. AUDIO Press to display and select Audio language in DVD mode. Each time you press the button, the language changes. Note: The available languages vary from disc to disc. 22. SETUP Press to display the Setup Menu which allows the user to change the DVD player options such as TV DISPLAY, OSD LANGUAGE, PARENTAL CONTROL etc. Refer to the settings and adjustments section for more information. 23. SUBTITLE Press to display and select the subtitle language in DVD mode. Each time you press the button, the subtitle language changes. Note: The type and number of languages for subtitle vary from disc to disc. 24. REPEAT Allows the user to repeat a selected title, chapter, or track. 25. DISC MENU Allow the user to access the disc menu. 9 26. ZOOM Press this button to enlarge the picture when playing a DVD disc. Press ZOOM button Once Second Third Forth DVD player perform Q1- Enlarge the picture 2 times of the original size Q2- Enlarge the picture 3 times of the original size Q3- Enlarge the picture 4 times of the original size Q off- Picture is returned to original size 27. VOLUME DOWN (-) or UP (+) Press to decrease or increase the level of the picture adjustments. Press to decrease or increase the volume of the wired headphones. The volume also use to adjust the picture setting level after the picture select button is pressed. 28. DVD Mode Select Button Switches certain function keys on the remote control for DVD function. 29. MUTE Press to mute the audio. Press it again to restore the sound to the previously set volume. 30. EJECT ()*

This button is used to eject the disc. 10 MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the screen mode display, OSD language and source default. 1) Press the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen. 2) Use the cursor buttons p or q to select the desired item in the main page and press the ENTER button to select. 3) The sub menu will appear on screen. 4) Use the cursor buttons p or q to select an item in the sub menu and then press the ENTER button to select. 5) Press the System Menu button to exit System Menu. Note: System Menu can be controlled via Remote Control only. (Items selected in the menu will have a green background) SCREEN MODE SELECT This allows the user to change the screen format (aspect ratio 16:9, 4:3). 1) To select the screen aspect ratio format highlight SCREEN MODE and then press the ENTER button to enter the sub menu. Then use the cursor buttons por q to select from either 4:3 or 16:9. Press the ENTER button to confirm the setting. SYSTEM MENU SCREEN MODE OSD LANGUAGE SOURCE DEFAULT DVD SCREEN MODE 4:3 16:9 11 OSD LANGUAGE This allows the user to select the language for the on-screen display. The user can either select English, Spanish, French or German for the OSD language. SYSTEM MENU SCREEN MODE OSD LANGUAGE SOURCE DEFAULT DVD OSD LANGUAGE ENGLISH SPANISH FRENCH GERMAN SOURCE DEFAULT DVD This allows the user to select from:

DVD default on- Whenever the unit is turned on it will return to DVD mode. DVD default off- Whenever the unit is turned on it will return to the last source selected. SYSTEM MENU SCREEN MODE OSD LANGUAGE SOURCE DEFAULT DVD SOURCE DEFAULT DVD ON OFF 12 SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-

screen display or prevent DVD playback for children. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown per diagram. 2. In order to set the desired option, move the highlight into the setup area using the cursor button u. 3. After entering the setup area, highlight the desired option using the cursor button p or q. 4. Press u to move the highlight to the different options for the selected item. Press p or q to select the desired options, and then press ENTER to confirm the selection. 5. Repeat steps 3~4 to continue setting the options that reside on the same Setup Page. 6. To change to another Setup page, press t until the highlight moves back to the icon on the top part of the Setup Menu. Then, repeat steps Language OSD Language Rating

: English Subtitle Video

: English Misc Audio

: Off 2~5. Exiting the Setup Menu Press the SETUP button again only. LANGUAGE SETUP Language for On-Screen Display OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display. The user can either select English, French, Spanish, German or Italian for the OSD language. Language OSD Language Subtitle Audio Video Rating Misc English French Spanish German Italian 13 SUBTITLE SETUP Select "SUBTITLE" using pqbutton, then press ubutton to enter the Sub menu. Select the subtitle you desire using pqbutton, then press ENTER to confirm the setting. Press tbutton to return. Note: The subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original language contained in the disc. Language OSD Language Subtitle Audio Video Rating Misc AUDIO SETUP Select "AUDIO" using pqbutton, then press ubutton to enter the Sub menu. Select the audio you desire using pqbutton, then press ENTER to confirm the setting. Press tbutton to return. Note: The audio selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original language contained in the disc. Language OSD Language Subtitle Audio Video Rating Misc English French Spanish German Italian Chinese Japanese Thai Off English French Spanish German Italian Chinese Japanese Thai VIDEO SETUP TV Display The TV DISPLAY setup allows you to adjust screen setting (aspect ratio). 4:3 This displays the wide picture with black bands on the upper and lower portions of the screen. 16:9 This displays a wide picture with black bands on the upper and lower portion of the screen. The bandwidth will vary, depending on the aspect ratio of the disc. Language TV display Rating Video TV type Misc 4:3 16:9 TV Type The TV TYPE setup allows you to select the system to fit to the color system of the TV to be connected. NTSC - Select this type for NTSC TV PAL - Select this type for PAL TV MULTI - Select this type for multi-system TV 14 Video

: 6.Adult Parental Rating Language Change Password RATING SETUP Rating This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. 1. G 2. PG 3. PG 13 4. R 5. NC 17 6. Adult The rating level can only be changed when the displayed lock is open. For first time use to change parental control, using cursor u button to enter parental mode, key in the default password (3308) and press ENTER. Press ENTER button again to Select the parental level, select the level and press ENTER. To change the password to your own password press Change Password mode and enter the default password (3308) and press ENTER. Press ENTER button and again and key in a new four digit password. After complete press the rating level can only be changed when the displayed lock is open. For first time use to change parental control, using cursor u button to enter parental mode, key in the default password (3308) and press ENTER. Press ENTER button again to button to end the process. Note: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot. Change Password Language Enter Password Rating Parental

: 6.Adult Video Misc Misc Misc SETUP Select "MISC using pqbutton, then press ubutton to enter the Misc menu. Select the subtitle you desire using pqbutton, then press ENTER to confirm the setting. Press tbutton to return. Language Load Factory Screen Saver

: On Video Rating Misc 15 Load Factory Load Factory allows you to reset all options to factory settings.

* This function will not affect the Rating control settings. Screen Saver ON -Screen saver will appear OFF -Screen saver will not appear Note: The DVD player will enable the Screen Saver mode if the unit is inactive for approximately 2 minutes. Language Load Factory Load Factory Screen Saver Yes No Video Rating Misc Language Load Factory Video Rating Screen Saver Off On Playing DVDs 1. Press the DISPLAY button on the remote control to display the status banner. The banner includes title, chapter, angle, audio, subtitle and Misc time. 2. Title Selection 3. Chapter selection Press numeric(0~9) buttons to initiate a change of title selection. Then press ENTER to implement the selection. Press numeric(0~9) buttons to initiate a change of chapter selection. Then press ENTER to implement the selection. As you toggle through the options, the repeat option changes at that time. The track, for example, repeats once that track has ended. The selected repeat option loops repeatedly until you turn it off. Playing USB 1. The System will detect the insertion of the USB media automatically if no disc is loaded. The system only auto detects the first media inserted (USB drive); the second media source can be manually selected by pressing the DVD source button on the remote control. 2. When a disc is inserted, the system will switch to DVD mode immediately regardless of USB media is currently playing. 3. The DVD source (DVD or USB) can only be changed while the DVD is not playing. 4. This system cannot support more than 2 memory partitions on the USB thumb drive. Note: The system will always default to the DVD when the system detect a disc in the DVD player. 16 Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed. Selecting Folders and Songs When a device containing MP3 files is loaded in the player, the navigation menu appears automatically. 1. Press p or q to move the highlight to the desired folder (if present) on the left side of the menu and press ENTER. The songs in the folder will be displayed on screen. 2. Press p or q to move the highlight to the desired track containing the song and Press ENTER to begin track playback. Skipping Songs Use the Next (:) button on the remote control to move to the next song. Use the Previous (9) button to move to the previous song. Selecting a Play Mode Filter (For MP3 & JPEG only) Filter Mode enables or disables the display of files contained on the media based on their file extension. The filter function applies to the following formats:

Audio - Audio data format (MP3, WMA) Photo - Photo data format (JPEG) Video - Video data format (MPEG , ) Flat Mode: play the entire disc This mode is always on (default). During the Flat Mode, all the data folder with MP3, JPEG & movies will be played in sequence. If the Flat Mode function is off, it will only play the selected folder; other folders are disabled.

1/12 1/12 001 002 003 004 005 006 001 002 003 004 005 006 17 00:00:01 Filter Flat Mode Audio Photo Video Repeat : off 00:00:01 Music Playing Flat Mode Repeat : Off Mode : Normal Music Playing Repeat: play repetitively Repeat function has 4 options : Off, Single, Folder, All. Move cursor to Repeat function and press ENTER, Off/

Single/Folder/All are displayed in that order. Repeat default is Off;

Off Turn off repeat function Single Repeat the song being played until STOP is pressed. Folder Play all songs in a folder repetitively All Play all songs on the disc repetitively 1/12

00:00:01 001 002 003 004 005 006 Flat Mode Repeat : Off Mode : Normal Music Playing Mode: play mode The Mode function has 4 options: Normal, Shuffle, Random and Music Intro. Move cursor to the desired Mode function and press ENTER; Normal/Shuffle/Random/Music Intro are selected in that order. The Mode function default status is Normal. Normal: Play all songs in folder once Shuffle: Play songs in a folder in a shuffle order. Each song in the folder is played only once. Random: Play songs in a folder in a random order. Music Intro: Play each song in order in the folder for 10 seconds Remark The purpose of the Music Intro function is to provide the user with a sample of each song for 10 seconds, thereby making it easy Flat Mode Repeat : Off Mode : Normal 001 002 003 004 005 006 Music Playing 00:00:01 1/12

to select and listen to a favorite song. Add to program Method: To add the selected songs into Browser view, make sure disc playback is off. Move cursor to Edit mode function and press ENTER. After Edit mode is selected, move cursor to songs list and select the songs which will be compiled and press ENTER. A check mark appears to the left of the selected song; to add the selected songs to the program, move cursor to the Add to program function and press ENTER. The selected songs is added into a new program list and the check mark will disappear on play list, move cursor to Program view function and press ENTER to browse the songs in the program. Press play button to play the selected songs. Notice: Edit mode, Program view or Add to program functions are relationship related when select the preferred song add to the songs list. 001 002 003 004 005 006 Program view Add to program Album:------------

Music Playing 00:00:01 Edit mode 1/12

18 Clear program Method: To clear the selected songs program file, double press stop button to the playback mode, move cursor to Edit mode function and press ENTER. After Edit mode is selected, move cursor to selected songs list and select the songs which you want to delete; press ENTER and a check mark will appears to the left of the selected song, move cursor to clear program and press ENTER, the selected songs will be deleted and disappear on the play list. Notice: Edit mode, Browser view or Clear program functions are relationship related when delete the selected song at the songs list. 1/12

00:00:01 001 002 003 004 005 006 Album:------------

Edit mode Broser view Clear program Music Playing 19 Region 1- USA, Canada Region 2- Japan, Europe, South Africa, Middle East, Greenland Region 3- S. Korea, Taiwan, Hong Kong, Parts of South East Asia Region 4- Australia, New Zealand, Latin America

(including Mexico) Region 5- Eastern Europe, Russia, India, Africa Region 6- China DVD Area Code The DVD player is preset to a region code at the factory depending on where the DVD player is sold. DVDs from a different region cannot be played in this unit and the unit will display "WRONG REGION DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. 20 Types of Discs your DVD will play DVD* disc - DVD discs which contain video. Audio discs - Audio CDs contain musical or sound content only. MP3 discs - A disc that contains audio files (for example, a CD-R with downloaded MP3 files).

* This system is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software, playback cannot be guaranteed. Loading and Playing Discs Before you load a disc, make sure that it is compatible with the player. Insert the disc with the label facing the headliner. Note: the following Discs CANNOT be used with this player :

MiniDisc Laserdisc CD-1, CD-ROM, DVD-ROM, Super Audio CD (SACD), DVD Audio, JPEG To load and Play a Disc Press the Power button to turn the unit ON. Select DVD mode and insert the disc (Label facing headliner) into the disc compartment. 21 TURNING THE UNIT ON OR OFF 1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Touching the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture quality. 4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.

*Note: Unit will turn On automatically when a Disc is inserted Power ON/OFF Button Remote Sensor Infrared Transmitter Screen Release Rear IR Sensor 22 OVERHEAD DOME LIGHTS The Dome Lights integrated into the unit are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle's interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle's interior lighting. Refer to the Installation Guide for wire connections. Do not leave the vehicle unattended with the dome light switch in the ON position, as this could result in a discharged battery. REAR IR SENSOR The unit incorporates two infrared remote sensors to relay signals to the unit when the remote control is pointed at the remote sensor. ACCESSORIES WIRELESS HEADPHONES The VOD129 includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your wireless headphones. 23 SOURCE FEATURE AV1 The AV1 input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video devices. To access the audio / video inputs, turn the unit on and press the S (source) button or the Source button on the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power button or remote control and it is now ready to play the audio and video signals from the source connected . Note: AV1 sources are available only if pre-installed during your video product installation. AUX The AUX input may be connected to a Video Cassette Player (VCP), Video game system, any other audio / video devices. To access the audio /

video inputs, turn the unit on and press the S (source) button or the Source button on the remote control until "AUX" is displayed on the screen. Note: Similarly, if an iPod is to be used, such as the Apple ipod 30, connect one end of the iPod adapter cable (purchased separately) to the AUX and USB connector on the unit and connect the other end of the cable to the iPod connecter. The iPod adapter cable can be purchased from the vender where the unit was sold. GAME To access the GAME by pressing the S (source) button or the Source button on the remote control until "GAME is displayed on the screen. The GAME selection is controlled by wireless game controller. 24 USING THE WIRELESS GAME CONTROLLER The Game Controller transmits to the unit with two infrared transmitters located on the front of the Game Controller. The Game Controller must be pointed toward the unit for correct operation. Press the source button on the remote control or the unit until GAME is displayed. GAME CONTROLLER FUNCTIONAL DESCRIPTION 1. Install two AAA batteries in the Game Controller. Observe the correct polarity. 2. Use the ON/OFF selector switch to turn on the Game Controller. A list of ten games will be displayed. 3. Use the A button (page up) or B button (page down) to display the three pages of games (1-10, 11-20, 21-30). Then use the direction buttons to move the arrow to the desired game. Press Start to select the game. 4. Press Start to begin the game. Press Start again at any time to pause the game. 5. Press RESET to return to the game list. 6. Use the ON/OFF selector switch to turn off the Game Controller after use. Bottom Side of Game Controller Battery case 25 TROUBLESHOOTING PROBLEM IR sensor inoperative Disc won't play SOLUTION Verify that the batteries in the remote are fresh. Verify that the remote sensor eye is not obstructed. Insert a disc with the label side facing up. Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs and MP3s. Both the unit and the disc are coded by region. If the regional codes dont match, the disc cant be played. Play starts, but then stops immediately The disc is dirty. Clean it. Condensation has formed. Allow player to dry out. No sound or distorted sound Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. If you are using the IR headphones, make sure you turn on the IR headphone power. Make sure the Modulator is ON and the proper Frequency has been selected. Cant advance through a movie You cant advance through the opening credits and warning information that appear at the beginning of movies because the disc is programmed to prohibit that action. 26 PROBLEM Not allowed at the moment Picture is distorted No forward or reverse scan Infared headphone inoperative SOLUTION The feature or action cannot be completed at this time because:

1. The discs software restricts it. 2. The discs software doesnt support the feature (e.g., angles) 3. The feature is not available at the moment. 4. Youve requested a title or chapter number that is out of range. The disc might be damaged. Try another disc. It is normal for some distortion to appear during forward or reverse scan. Some discs have sections that prohibit rapid scanning or title and chapter skip. If you try to skip through the warning information and credits at the beginning of a movie, you wont be able to. This part of the movie is often programmed to prohibit skipping through it. Verify that the batteries in the infrared headphone are fresh. Verify the unit infrared sensor eye is not obstructed. To reset the IRT sensor eye back to normal operation, press the screen mode and Power on/off button in the same time (unit in standby mode) to restart the IRT mode program. 27 REPLACEMENT PARTS SPECIFICATIONS Remote Control 136-4840 LCD Backlighting Edge Light Tube Resolution Pixels 1280 x 800 1280 x RGB x 800 Operation Temperature 32 ~131 F (0 ~ 55 C) Storage Temperature

-4 ~ 158 F (-20 ~ 70 C) Backlit life 30,000 Hours Video Display System NTSC / PAL Headphone Audio Output 0.03W @ 32 ohms Video Output Power Source Dimension 1.0Vp-p @ 75 ohms 12V DC L x W x H 14.0" x 12.0" x 2.0"

356mm x 305mm x 51mm Specifications subject to change without notice. 28 29 WWW 2009 Audiovox Electronics Corp., Hauppauge, NY 11788 XXX-XXXX