490mm m m 0 0 1 J2 EZCast Beam J2 Quick Start Guide Thank you for purchasing the EZCast Beam J2 DLP projector. Our product combines the easy to use interface, portability, and cross platform compatibility, to let you enjoy projecting media from Android, iOS phones and tablets, and laptops, anytime, anywhere. EZCast app installation Please visit www.EZCast.com/app to download EZCast app for every supported platform. Mobile devices can proceed to the relevant download area by scanning the QR code below.
(iOS users can search for EZCast in the App Store to download the app)
(Android users can search for EZCast in Google Play to download the app) This EZCast Beam J2 Quick Start Guide provides a guideline for basic operation.Please read the guide thoroughly before operating the projector.Please visit www.EZCast.com for additional information.Product information is subject to change without prior notice. Never look directly into the projector lens when the lamp is turned on.The bright light can damage your eyes.Never let children look into the lens when it is on. 70mm 1. Precautions How to use the projector:
1Do not point the projector lens towards human eyes. The bright light can cause damage to eyes. 2Do not block the air vents. Blocked ventilation may cause overheating and damages to the projector electronics and components. 3Do not use chemicals, detergents or water to clean the projector. Moisture and chemicals may corrode the projector circuit boards. 4Do not place the projector within reach of children. 5Only use the projector in dry environment with good ventilation. 6Do not store the projector in extremely hot or extremely cold temperatures. Extreme heat and cold can reduce the component lifetime of projector. Recommended working environment is between 5~35. 7Do not attempt to dry the projector in heating devices, such as dryer, microwave etc. 8Do not squeeze or apply excess pressure to the projector. The projector may be damaged from the pressure. 9Do not throw, knock or shake the projector. The projector may be damaged from the vibration. 10Do not attempt to open the projector. Please refer to qualified customer support. 11Do not attempt to service the projector. Please refer to qualified customer support in the event of projector malfunction. 2. How to set up EZCast Beam J2 projector DC HDMI USB Headset Jack 3. EZCast Beam J2 body and remote Arrows Power Select Focus Ring Lens Stand Back Air Vent Power Arrows Back OK F F+
+
F Menu Select Function Key Volume DC HDMI USB Power Indicator Headset Jack 4. Operating instructions 1. Before operation:
1Power on the projector with the supplied power adapter. 2LED turns green to indicate idle state. 2. Press power button on the projector chassis to turn the projector on. 3. Once in the home screen, use the arrows (on projector chassis or remote) to select the functions: (EZWire Mobile, EZMirror, EZWire PC, EZCast, HDMI, USB Disk, Setting) EZCast EZMirror EZWire PC EZWire Mobile HDMI USB Disk Setting 5. Change image focus Point the projector lens perpendicular to the projection screen or wall, and adjust the Focus Ring until the projected image is in focus. We recommend playing videos or images from the projector to facilitate the adjustment process. 6. Connecting a USB Disk Plug a USB Disk to the USB input on the projector. 1Select USB Disk. 2Choose either Video, Music or Photo to browse the files. 3Use arrows to select the media files and press OK. 4During playback, press OK to open the playback menu, then use Arrows and OK to select. 7. Choosing the signal source Press the Menu key on the remote and use the Arrows (on projector chassis or remote) to choose the desired signal source. Then press OK. 8. HDMI connection Use the HDMI input to plug and play media to projector. 9. Battery charger A USB 5V source is available on the projector to recharge mobile devices. 10. Power indicator LED turns green when connected to power. Flashing red means battery is being charged. LED turns solid red when battery is fully charged. LED turns blue when unconnected to power and also recharging mobile devices. 11. Setting menu 1Select Language to change language with arrows. 2Select ECO Mode to conserve energy. 3Select Reset All and choose yes to reset projector to factory default. All saved changes to Setting are lost. 4Advanced Setting: Projection Location, Brightness, Contrast, Auto V Keystone, V. Keystone, H. Keystone, 4 Corner Correction settings. Use up/down Arrows to choose function, and left/right Arrows to adjust settings. 5Keystone adjustment:
V. Keystone: Automatic vertical keystone adjustment up to 25 degrees. H. Keystone: Manually adjust horizontal keystone up to 14 degrees. 4 Corner Correction: Choose the corner to be adjusted and use arrows to change the location. 1. EZWire Mobile (for both iOS and Android smart phones) Step 1: Turn on projector and select EZWire Mobile. Step 2: Use smart phone cable to connect phone to the projectors USB port. (Android phones require EZCast app) Step 3: Once an iPhone is connected to the projector, choose Trust when prompted on screen to begin screen mirroring and recharging. EZCast Trust This Computer?
Dont Trust Trust Step 4: Once an Android phone is connected to the projector, turn on the EZCast app and follow the instructions below to screen mirror and recharge battery. Cloud Storage Photo Web Developer... USB Debugging connect Tethering USB Tethering connect EZCast ..... Cloud Storage ok Photo Web 2. EZMirror (for Android smart phones) Step 1:
Select EZMirror in the home screen. Step 2:
Turn on WLAN on the Android phone. Step 3:
Choose Miracast on the Android phone and select the projector device Beam-XXXXXXXX, to begin screen mirroring. 3. EZWire PC (screen mirroring for Windows and Mac systems) Step 1:
Visit www.EZCast.com/app to install the EZCast app. Step 2:
Use a USB cable to connect the laptops USB port to the projectors USB port, and select EZWire PC. EZWire PC Device Name Beam-6014060A 4. EZCast (wireless screen mirroring for Android and iOS devices) Step 1:
Install the EZCast app from Google Play or App Store. Step 2:
Choose EZCast from the home menu to access the EZCast screen mirroring interface. Step 3:
Turn on WLAN on the smart phone and connect to the network Beam-XXXXXXXX with password shown on the projector. EZMirror Connect to Beam-6014060A Status : Wait P2P CONNECTION. EZCast.com EZCast Step 3:
Execute the EZCast app and select the desired device from the list to screen mirror. Device List Beam-6014060A EZCast Pro-1A2B3C4D EZCast 4K-5D1F5E4E EZCast Device Name Beam-6014060A password 87654321
(1) EZCast.com EZCast Different brands of Android phones have different names for Miracast. Common names include: Smart View, Multi-screen etc. Please check your specific brand of Android phone for Miracast support. Step 4:
Execute EZCast app and connect to the projector. Cloud Storage Photo Web Beam-6014060A Device List Select Device Beam-6014060A EZCast Pro-1A2B3C4D EZCast 4K-5D1F5E4E Cloud Storage Photo Web Setting Device Name Beam-6014060A password 87654321
(1) MAC Addr:undefined IPAddr:undefined Internet 87654321 undefined Password Device Name Setting Device Name Beam-6014060A password 87654321
(1)
(1) AP List Connect for Internet access!
WiFi-123 HiWiFi-5G EZCast EZCast-123 EZCast-456 EZCast-789 Step 5:
EZCast app lets you access features such as EZChannel, Photo, Camera, Music, Video, Web and Cloud Storage. Projector maintenance:
Projector is a complex electronic device which requires diligent maintenance to maintain good working order and useful lifetime. Here are some key points to maintaining your projector:
1. Dust removal: Dust builds up inside the projector reduces ventilation and heat dissipation. Please consider cleaning the air vents once a month. 2. Ventilation: Projector produces heat during operation, therefore make sure air vents are not blocked at any time to ensure stable operation. 3. Lens cleaning: Cleanliness of the lens directly affect the quality of the projected images. When the lens is dirty, please use a soft cloth to wipe the lens. Do not scratch or clean the lens with detergent. 4. Cleaning: Please wipe off the dust on the projector to prevent overheating due to dust build up. 5. Protection from moisture: Make sure the humidity of working environment is within 45%-60% for optimal performance. 6. Shock prevention: Excess shock and vibration may damage the projector. Do not move or knock the projector during operation. 7. Do not operate projector on wobbly and uneven surfaces. 8. Do not operate projector near liquid or wet surfaces. 9. Turn off power and unplug projector when not in use. Common issues and solutions:
Common issues No power, LED off, cannot power on LED on, cannot power on Troubleshooting Solutions Check the power adapter for loose connection. Check the power adapter for loose connection, press the Power button to turn on projector. 1. Check the Quick Start Guide for the correct screen mirroring function. 2. Shorten the distance between smart device and projector for best screen mirroring quality. 3. Make sure the smart phone is connected to the correct Wi-Fi network SSID. Check the internet connection for your smart device. Did not short press Power before connecting smart phone. Cannot screen mirror Cannot stream media Unable to recharge smart phone when projector is unplugged from power Warranty card:
Customer name: _________________________________________ Contact phone number: ___________________________________ Contact address: _________________________________________ Product description: ______________________________________ Purchased from: _________________________________________ Purchase date: ___________________________________________ Warranty:
1. The defective project is valid for refund and replacement if claimed with proof of purchase and warranty card within 7 days of purchase, and the defect was not caused by inappropriate usage or mishandling of product. 2. Product warranty is limited to 12 months within the manufacturing date, and covers the main projector only. The warranty does not cover accessories and defects caused by inappropriate usage or mishandling of product. The warranty claim is only valid with proof of purchase and warranty card. 3. Contact Information Company name: Actions Microelectronics Co., Ltd. Company website: www.EZCast.com Company address: 201, No.9 Building, Software Park, Kejizhonger Rd., Gaoxinqu, Nanshan, Shenzhen, China 518057 20C