PRODUCT SPECIFICATION Version 1.1 ScreenBeam 802.11 a/b/g/n/ac WiFi Module Model Number: SBRT8812AU 2.4G channel1-11 5G channel36-48 ;149-165 Custom Approval Section Custom Name Department Approval Date DESIGN CHECK APPROVAL Actiontec Electronics, Inc. 760 North Mary Ave., Sunnyvale, California 94086 United States PRODUCTS SPECIFICATION SBRT8812AU Revision Document revision history Date Approved by Remarks Version 1.0 2015-02-27 Version 1.1 2015-04-17 Draft Adding statement PAGE 2 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 1. General Description This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is based on Realtek RTL8812AU chipset that complied with IEEE 802.11b/g/n/ac Draft 3.0 compatible WLAN ,and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4~2.5GHz. It can be used to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g,11Mbps for IEEE 802.11b and 150Mbps for IEEE 802.11n and 433.3Mbps for IEEE 802.11ac to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11 a/b/g/n/ac USB Module offers absolute interoperability with different vendors 802.11a/b/g/n/ac.Access Points through the wireless LAN. 2. Features
Compatible with IEEE 802.11b standard to provide wireless 11Mbps date rate.
Compatible with IEEE 802.11g standard to provide wireless 54Mbps date rate.
Compatible with IEEE 802.11n standard to provide wireless 150Mbps date rate.
Compatible with IEEE 802.11ac standard to provide wireless 433.3Mbps date rate.
Operation at 2.4~2.5GHz and 5.15~5.825GHz frequency band to meet worldwide regulations
Provides simple legacy and 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility.
Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication
Supports IEEE 802.11i(WPA and WPA2),WAPI,. enhanced security
Friendly user configuration and diagnostic utilities
Drivers support Windows XP,Vista.Win7
High speed USB 2.0 interface
ROHS compliant PAGE 3 OF 13 Version 1.1 PRODUCTS SPECIFICATION 3. Application Diagrams 3.1 Functional Block Diagram SBRT8812AU 3.2 General Requirements 3.2.1 IEEE 802.11b Section 3.2.1.1 3.2.1.2 3.2.1.3 3.2.1.4 3.2.1.5 3.2.1.6 3.2.1.7 3.2.1.8 Feature Standard Radio and Modulation Schemes Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector Detailed Description IEEE 802.11b DQPSK , DBPSK , DSSS , and CCK 2412 2472MHz ISM band 11 channels for United States 13 channels for Europe Countries 14 channels for Japan 11,5.5,2,and 1Mbps CSMA/CA with ACK Typical RF Output Power at each RF chain,Data Rate and at room Temp. 25 17dBm(2dB) at 1,2,5.5,11Mbps Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8%
-76 dBm at 2Mbps
-76 dBm for 11Mbps PAGE 4 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 3.2.2 IEEE 802.11g Section 3.2.2.1 Feature Standard Radio and Modulation Type Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector 3.2.2.2 3.2.2.3 3.2.2.4 3.2.2.5 3.2.2.6 3.2.2.7 3.2.2.8 Detailed Description IEEE 802.11g QPSK , BPSK , 16QAM ,64QAM with OFDM 2412 2472MHz ISM band 11 channels for United States 13 channels for Europe Countries 13 channels for Japan 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain, Data Rate and at roomTemp. 25
+17 dBm at 6,9Mbps
+16 dBm at 12,18Mbps
+15 dBm at 24,36Mbps
+14 dBm at 48,54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25
-82 dBm at 6Mbps
-81 dBm at 9Mbps
-79 dBm at 12Mbps
-77 dBm at 18Mbps
-74 dBm at 24Mbps
-70 dBm at 36Mbps
-66 dBm at 48Mbps
-65 dBm at 54Mbps PAGE 5 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 3.2.3 IEEE 802.11a Section 3.2.3.1 3.2.3.2 Feature Standard Radio and Modulation Type 3.2.3.3 Operating Frequency 3.2.3.4 3.2.3.5 3.2.3.6 3.2.3.7 Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector 3.2.3.8 Receiver Sensitivity at Antenna Connector Detailed Description IEEE 802.11a QPSK , BPSK , 16QAM ,64QAM with OFDM 5.18 ~ 5.24GHZ, 5.745~5.825GHz for US and Canada 5.18 ~ 5.24GHZ, 5.745~5.825GHz for Japan 5.18 ~ 5.24GHZ, 5.745~5.825GHz Hz for Europe 5.18 ~ 5.24GHZ, 5.745~5.825GHz for China 12 non-overlapping channels for US and Canada 8 non-overlapping channels for Japan 19 non-overlapping channels for Europe 4 non-overlapping channels for China 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain, Data Rate and at roomTemp. 25
+14 dBm at 6,9Mbps
+13 dBm at 12,18Mbps
+12 dBm at 24,36Mbps
+11 dBm at 48,54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25
-82 dBm at 6Mbps
-81 dBm at 9Mbps
-79 dBm at 12Mbps
-77 dBm at 18Mbps
-74 dBm at 24Mbps
-70 dBm at 36Mbps
-66 dBm at 48Mbps
-65 dBm at 54Mbps PAGE 6 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 3.2.4 IEEE 802.11n Section 3.2.4.1 Feature Standard Radio and Modulation Type Operating Frequency 3.2.4.2 3.2.4.3 3.2.4.4 Data Rate Detailed Description IEEE 802.11n BPSK , QPSK , 16QAM ,64QAM with OFDM 2.4GHz band:2412 ~ 2472MHz 2412 ~ 2462MHz (for FCC) 5GHz and:5.18 ~ 5.24GHZ, 5.745~5.825GHz MCS GI=800ns 20MHz 0 1 2 3 4 5 6 7 6.5 13 19.5 26 39 52 58.5 65 40MH 13.5 27 40.5 54 81 108 121.5 135 GI=400ns 20MHz 7.2 14.4 21.7 28.9 43.3 57.8 65.0 72.2 40MHz 15 30 45 60 90 120 135 150 3.2.4.5 Media Access Protocol CSMA/CA with ACK 3.2.4.6 Transmitter Output Power at Antenna Connector 3.2.4.7 Receiver Sensitivity at Antenna Connector Typical RF Output Power(tolerance2dB) at each RF chain,Data Rate and at roomTemp. 25 2.4GHz Band/HT20
+14dBm at MCS0~7 5GHz Band/HT20
+11dBm at MCS0~7 2.4GHz Band/HT40
+14dBm at MCS0~7 5GHz Band/HT40
+11dBm at MCS0~7 Typical Sensitivity at each RF chain at Which Frame(1000-byte PDUs)Error Rate=10% and at room Temp. 25 2.4GHz Band/HT20
-82dBm at MCS0
-79dBm at MCS1
-77dBm at MCS2
-74dBm at MCS3
-70dBm at MCS4
-66dBm at MCS5
-65dBm at MCS6
-64dBm at MCS7 5GHz Band/HT20
-82dBm at MCS0
-79dBm at MCS1
-77dBm at MCS2
-74dBm at MCS3
-70dBm at MCS4
-66dBm at MCS5
-65dBm at MCS6
-64dBm at MCS7 2.4GHz Band/HT40
-79dBm at MCS0
-76dBm at MCS1
-74dBm at MCS2
-71dBm at MCS3
-67dBm at MCS4
-63dBm at MCS5
-62dBm at MCS6
-61dBm at MCS7 5GHz Band/HT40
-79dBm at MCS0
-76dBm at MCS1
-74dBm at MCS2
-71dBm at MCS3
-67dBm at MCS4
-63dBm at MCS5
-62dBm at MCS6
-61dBm at MCS7 PAGE 7 OF 13 Version 1.1 3.2.5 IEEE 802.11ac Section 3.2.5.1 3.2.5.2 Feature Standard Radio and Modulation Type 3.2.5.3 Operating Frequency 3.2.5.4 3.2.5.5 3.2.5.6 3.2.5.7 Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector 3.2.5.8 Receiver Sensitivity at Antenna Connector PRODUCTS SPECIFICATION SBRT8812AU Detailed Description IEEE 802.11ac QPSK , BPSK , 16QAM ,64QAM,256QAM with OFDM 5.18 ~ 5.24GHZ, 5.745~5.825GHz for US and Canada 5.15~5.35GHz and 5.47~5.725GHz for Japan 5.15~5.35GHz and 5.47~5.725GHz for Europe 5.725~5.825GHz for China 12 non-overlapping channels for US and Canada 8 non-overlapping channels for Japan 19 non-overlapping channels for Europe 4 non-overlapping channels for China at most 433.3 Mbps CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain, Data Rate and at roomTemp. 25
+11 dBm at HT20 / HT40 Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25 5GHz Band / HT40
-79dBm at MCS0
-76dBm at MCS1
-74dBm at MCS2
-71dBm at MCS3
-67dBm at MCS4
-63dBm at MCS5
-62dBm at MCS6
-61dBm at MCS7
-56dBm at MCS8
-54dBm at MCS9 5GHz Band / HT20
-82dBm at MCS0
-79dBm at MCS1
-77dBm at MCS2
-74dBm at MCS3
-70dBm at MCS4
-66dBm at MCS5
-65dBm at MCS6
-64dBm at MCS7
-59dBm at MCS8
-57dBm at MCS9 5GHz Band / HT80
-76dBm at MCS0
-73dBm at MCS1
-71dBm at MCS2
-68dBm at MCS3
-64dBm at MCS4
-60dBm at MCS5
-59dBm at MCS6
-58dBm at MCS7
-55dBm at MCS8
-51dBm at MCS9 PAGE 8 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU Maximum
+80 60 125 Units Feature Antenna Type Operating Voltage Current Consumption Form Factor and Interface High Speed USB2.0 Interface Windows XP/ WinCE/ Vista,/ Win7, Linux, MAC 64/128-bits WEP, WPA, WPA2 Minimum
-40 0 0 Temperature Limit Ratings Detailed Description Integrated antenna 5V10%
900mA 4. Electrical and Thermal Characteristics 4.1 Parameter Storage Temperature Ambient Operating Temperature Junction Temperature 4.2 General Section 5.2.1 5.2.2 5.2.3 5.2.4 4.3 Software Driver Security PAGE 9 OF 13 Version 1.1 PRODUCTS SPECIFICATION 5 Connector Definition 5-Pin 1.25 mm PAD Pin 1 Definition Power_EN 6 Mechanical Dimensions 2 GND 3 D+
4 D-
5 VDD+5V SBRT8812AU
*TLERANCES ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED
*UNIT:mm PAGE 10 OF 13 Version 1.1 PRODUCTS SPECIFICATION Appendix 1 : Schematic C 1 0 1 0 p F N e t D X 0 _ 5 6 5 4 T R S W B _ 0 C 3 1 0 p F T R S W B _ 0 5GFEM0_P16 CN P 8 0 2 5
-
A 1 5G_0 C 6 4 p 7 F 5 G F E M 0 _ P 1 3 1 3 1 6 1 5 1 4 G G P 1 U 1 P 3 P 2 G 1 2 3 1 2 3 4 GND RX GND VCC2 C R X G N D A N T L N A _ E N 5G FEM V D E T P A _ E N G N D T X 5 6 7 8 R X 5 G _ 0 1 u F C 9 8 V 3 3 1 u F C 1 3 V33 V33 1 u F C 1 2 12 11 10 9 17 GND VDD VCC1 NC GND I C 2 L X 5 5 8 6 SBRT8812AU 2G_1 C 8 2 0 p 7 5 F L 1 4 2 n 7 H C 8 0 0 p 7 5 F N N e e t t C C 1 1 1 1 _ _ 2 2 NetCON0_1 NetCON0_2 1 n H L 1 2 GND 1 23 4 A N T 1 A N T 2 1 23 4 N P C 9 2G_0 C 1 4 1 p 0 F NetC51_1 C 2 3 0 p 7 5 F C 2 2 1 p 2 F L 3 2 n 7 H L 4 2 n 7 H N N e e t t C C 5 5 1 1 _ _ 2 2 L 5 2 n 7 H C 2 1 1 p 2 F T R N _ 0 T R P _ 0 C 3 5 1 p 2 F C 4 0 0 u 1 F V33 C 3 3 5 p 6 F C 3 9 5 p 6 F L 7 1 0 n H L 6 1 0 n H R F 2 O P _ 0 R F 2 O N _ 0 CN P C 5 0 0 p 3 F 1 n H L 1 6 NetCON1_1 C 8 4 1 0 p F N e t D X 1 _ 5 N P C 8 1 6 5 4 8 0 2 5
-
A 1 5G_1 T R S W B _ 1 T R S W B _ 1 C 4 1 0 p F 5GFEM1_P16 NetC69_1 CN P C 7 8 4 p 7 F 5 G F E M 1 _ P 1 3 G G P 1 U 2 P 3 P 2 G 1 2 3 C 6 8 0 u 1 F V33 V33 C 6 9 0 u 1 F 12 11 10 9 17 GND VDD VCC1 NC GND I C 3 L X 5 5 8 6 1 6 1 5 1 4 1 3 C R X G N D A N T L N A _ E N 5G FEM 1 2 3 4 GND RX GND VCC2 1 u F C 9 3 V 3 3 V D E T P A _ E N G N D T X 5 6 7 8 R X 5 G _ 1 L 8 1 n 2 H R F 5 I P _ 1 R 4 2 1 0 0 K N P C 9 0 5 G F E M 1 _ P 5 P A P E _ 5 G _ 1 CN P CN P T X 5 G _ 1 C 5 7 4 p 7 F R F 5 O P _ 1 C 7 4 1 p 2 F L 2 2 n 7 H L 1 3 2 n 7 H 1 p 2 F C 7 5 T R P _ 1 C 6 4 1 p 2 F V33 L 1 1 1 0 n H L 9 1 0 n H C 6 7 4 p 7 F C 6 6 4 p 7 F R F 2 O P _ 1 R F 2 O N _ 1 V D 1 2 N P C 2 3 C 3 8 0 u 1 F V 3 3 C 4 3 0 u 1 F V 3 3 R F 2 O P _ 0 R F 2 O N _ 0 0 R R 9 C 4 5 0 u 1 F 1 n F C 4 4 V 1 2 R F V 1 2 L C 4 8 0
. 1 u F V 3 3 9 8 7 6 5 4 3 2 1 V 3 3 _ P A D 5 G _ S 0 R F 2 O P _ S 0 R F 2 O N _ S 0 V 3 3 _ P A D 2 G _ S 0 R F 2 I P _ S 0 R F 2 I N _ S 0 V 1 2 _ S 0 V 1 2 _ S Y S V 3 3 _ S Y S R F 5 O P _ 0 1 0 R F 5 O P _ S 0 R 1 1 0 0 K C 8 1 0 p F 5 G F E M 0 _ P 5 P A P E _ 5 G _ 0 CN P CN P C 1 8 0 p 3 F L 2 1 n 2 H R F 5 I P _ 0 C 2 9 0 u 1 F C 2 8 0 u 1 F CN P C 2 7 0 u 1 F C 3 7 0 u 1 F V12 V33 XIXIXIXIXIXIXIXIXIXIXIXIXIXIXIXI XO V12 V33 C 2 5 1 5 p F 1 4 X 1 4 0 M H z X T A L P 2 4 X T A L P 2 3 X T A L P 3 C 2 6 1 5 p F R 6 1 0 K V33 PDn R 7 1 0 0 K T X 5 G _ 0 C 3 4 4
. 7 p F R F 5 O P _ 0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 V D 1 2 R F _ 0 V D 1 2 C 4 8 1 0 u F 0 R R 4 C 4 6 0 u 1 F T R S W B _ 0 1 9 T R S W _ 0 1 8 P A P E _ 5 G _ 1 0 7 V 1 2 R F 1 0 u F C 1 7 V V 1 1 2 2 V 3 3 R F 5 I P _ 0 1 6 1 5 1 4 1 3 1 2 1 1 T R S W B _ S 0 T R S W _ S 0 P A P E _ 5 G _ S 0 P A P E _ 2 G _ S 0 V 1 2 _ A F E _ S 0 V 1 2 _ B B _ S 0 R F 5 I N _ S 0 R F 5 I P _ S 0 V D 3 3 P A 5 G _ S 0 VD12A VD33A XI XO CK_BT ANTSW ANTSWB VD12D VD33D GPIO[4] / WL_ACT GPIO[5] / BT_RFQ / BT_EN GPIO[6] / BT_STATE GPIO[7] / BT_PRI LED2 / GPIO[8]
LED1 / GPIO[9]
LED0 / GPIO[10]
GPIO[11] / PDn GPIO[0] / BT_Suspend GPIO[1]
R T L 8 8 1 2 A U 7 7 G N D RF5IN_S1 RF5IP_S1 VD33PA5G_S1 RF5OP_S1 V33_PAD5G_S1 RF2OP_S1 RF2ON_S1 V33_PAD2G_S1 RF2IP_S1 RF2IN_S1 V12_BB_S1 V12_AFE_S1 PAPE_2G_S1 PAPE_5G_S1 TRSW_S1 TRSWB_S1 VD12D VD33D FB_SPS 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 C 1 5 0 u 1 F C 1 3 1 0 u F C 5 5 0 u 1 F RF5IP_1 V33 RF5OP_1 V33 RF2OP_1 RF2ON_1 V33 C 5 4 0 u 1 F VD12 V12 V12 V12RF 1 u F C 6 3 0 R R 1 2 0 R R 1 4 PAPE_5G_1 TRSW_1 TRSWB_1 V12 V33 C 7 0 0 u 1 F C 6 1 0 u 1 F C 7 2 1 0 u F I C 1 V 1 2 G P I O
[
2
]
G P I O
[
3
]
G N D H S D P H S D M V D 1 2 S V D 3 3 S R R E F V D D T X H S O N H S O P G N D H S I N H S I P V D D R X G N D L X _ S P S 0 L X _ S P S 0 V D S P S 3 3 3 9 4 0 4 1 4 2 4 3 4 4 4 5 4 6 4 7 4 8 4 9 5 0 5 1 5 2 5 3 5 4 5 5 5 6 5 7 H S D P H S D M V 1 2 V 3 3 R R E F V 1 2 V 1 2 L X V 3 3 2 4 K R 1 1 1 u F C 5 9 C 5 1 0 u 1 F 1 u F C 5 2 D
+
D
-
5 V D
+
D _ P o w e r E N D
+
D
-
5 V N C G N D P o w e r E N 1 u F C 6 0 L 1 0 4 u 7 H C 7 1 1 0 u F V V 1 1 2 2 1 u F C 6 2 V 1 2 L C 8 6 1 0 u F 5 4 Q 2 G 9 0 9 1 F B I V N G N D S W E N 1 2 3 C 1 1 0 u F V 3 3 V 1 2 V 1 2 R F PAGE 11 OF 13 5 V P o w e r E N R 1 0 1 0 0 K 1 u F C 4 2 C 8 5 0 u 1 F 5 V 5 4 Q 1 G 5 7 2 8 F B I V N G N D S W E N 1 2 3 C 1 6 0 u 1 F R 1 1 5 0 K 5 V F B _ P 5 2 2 K R 1 6 L 1 4 u 7 H E N _ P 1 C 1 1 0 u F R 1 5 1 0 0 K C 8 8 1 0 0 p F 1 u F C 2 4 S P S _ P 3 V V 3 3 3 3 V 3 3 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU Appendix 2 : Statement FCC Important Notes:
(1) FCC Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
(2) Co-location Warning:
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
(3) OEM integration instructions:
This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
(4) Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
(5) End product labeling:
The final end product must be labeled in a visible area with the following:
Contains Transmitter Module FCC ID: LNQSBRT8812AU.
(6) Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. PAGE 12 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. PAGE 13 OF 13 Version 1.1