B2 Connect Using Windows 8.1 or Higher Step1 From the Windows desktop, navigate to the Charms menu and select Devices. You can also use the shortcut keys, Windows + K. Step2 From the Charms menu, click the Project icon. Step3 From the Project screen, select Add a wireless display. Step4 Select the ScreenBeam Receiver from the list. Step5 Enter the PIN as displayed on the television screen, then connect and display. Note: If you are running Windows 8.1 and the screens above do not appear, go to http://www. actiontec.com/widi81 for the latest software updates. SBBE-qsg-0530-0721-000-EN-v7.indd 1 B3 Connect Using Miracast-Enabled Device You can connect to ScreenBeam Pro from a Miracast-enabled Android device, such as a smartphone, tablet, or game console (find the wireless display feature under Settings). Also, the device should be running the latest software for best performance. Step1 On a Miracast-enabled Android device, locate and open the Wireless Display Application. Note: The name of the Wireless Display Application depends on the device type and model. Refer to the devices carrier or manufacturer user manual for more details. receivers. Select the ScreenBeam Receiver from the list. Step2 The Wireless Display Application scans for available Step3 Wait for the device to associate with the Receiver. When it does, the devices screen will be displayed on the HDTV. C Device Management Device management webpage provides the ability to manage the receivers settings. To access the management web interface:
1. Connect to the Receiver SSID (SSID can be found on the Ready To Connect screen) from a wireless enabled laptop. 2. Enter the network security key: 12345678 . 3. Open a web browser on the laptop and enter this URL https://aeis-
ink. (which is also displayed on the Ready To Connect screen). Note: Ignore the certificate warning message and allow it as an exception. 4. The Login Username is Administrator and Password is WiDi . C Product Support & Additional Information Go to http://international.actiontec.com/support for product support, updates, and more information including:
Firmware Updates Troubleshooting Registration FAQs Declarations of Conformity (DoC) To obtain the complete DoC form in softcopy, go to the Actiontec Electronics Declarations of Conformity EU/EEA website at http://international.actiontec.com/support/doc For GNU General Public License (GPL) related information, go to http://opensource.actiontec.com The symbol at right is placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. This product has a 1-year Limited Hardware Warranty and 90-day free software updates from date of purchase. Local Law This Limited Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary from state to state in the United States, from province to province in Canada, and from country to country elsewhere in the world. To the extent that this Limited Warranty Statement is inconsistent with local law, this Statement shall be deemed modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this Warranty Statement may not apply to the customer. Go to http://www.actiontec.com/products/warranty.php for more information. Wireless Display Receiver Installation Guide This Installation Guide will walk you through the easy steps to set up your ScreenBeam Pro - Business Edition Receiver. During this process, well show you how to :
Install the Receiver A B1 Connect Using Intel WiDi App B2 Connect Using Windows 8.1 or Higher B3 Connect Using WiFi Miracast-Enabled Device C Device Management 2014 Actiontec Electronics, Inc. ScreenBeamTM and the Actiontec logo are registered trade-
marks or trademarks of Actiontec Electronics, Inc., in the U.S. or other countries. All other names are properties of their respective owners. Part No: 0530-0721-000 NEXT 2014/4/11 10:12:33 Welcome!
Congratulations on your purchase of the ScreenBeam Pro - Business Edition Receiver. Once connect to your compatible mobile device, youll be able to project your devices screen wirelessly, to a selected HDTV monitor or projector. A Install the Receiver Step1 Get the Receiver, Power Adapter, and HDMI cable from the product box. Step2 Plug one end of the power cord into the Receiver, and the other end into a power outlet. Step3 Plug one end of the supplied HDMI cable into the HDMI port on the Receiver, and the other end into an available HDMI port on the HDTV. When Steps 1, 2, and 3 are complete, the hardware should be connected as shown in the figure, below. B1 Connect Using Intel WiDi App Note: If your devices OS is Windows 8.1 or higher, proceed to section B2 (Connect Using Windows 8.1 or Higher) for connection instructions. Step1Find the Intel Wireless Display application on the device and launch it. To find the application, go to Windows Search on your device and search for Intel WiDi in your apps. Step4 The HDTV displays messages to show the status of the connection process. Step5 A Connection Successful screen appears on your devices screen, as well as on the HDTV. Note: The power outlet and cable may appear different than those shown in the figure. Step4 Make sure the HDTV is turned on and set to display the input from the correct HDMI port (the one you plugged into during Step 3). Step5 Verify that the Ready to Connect screen appears on the HDTV. The Receiver is now connected to your HDTV. Proceed to one of the next three sections of this Guide (depending on the device you are using to connect to ScreenBeam Pro) to finish the connection procedure. Step2 The device scans for available receivers. Select the same receiver name as seen on the HDTV and click Connect. (The Connect Automatically checkbox is optional.) Step3 Wait until the Receiver displays a PIN on the HDTV, and a PIN entry box on the screen of the WiDi device. Enter the PIN in the PIN entry box on the WiDi device, then click Continue. Display Tip: If the edges of the device screen cannot be seen on the HDTV, adjust cropping. To do this, enter the WiDi application and click Settings. Navigate to the Picture and Sound section, click Adjust cropping, and adjust the HDTV picture by clicking plus (+) or minus (-). Note: Make sure the device supports Intel Wireless Display (WiDi) software version 3.5 or higher. To find out what version of Intel WiDi your device has, enter the Intel WiDi application and click Help, then navigate to the About WiDi section. To obtain the latest Intel WiDi software and drivers, go to:
http://www.intel.com/go/wirelessdisplayupdate Flip this Guide over to continue NEXT SBBE-qsg-0530-0721-000-EN-v7.indd 2 2014/4/11 10:12:33 FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For 5150-5250 MHZ in indoor use only. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.