WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6574246.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ADTRAN SDG-8612/8614 series Service Delivery Gateway Wi-Fi 6 2.5G Router P/N: 17600070F1 The ADTRAN SDG-8612/8614 series is a Wi-Fi 6 2.5 Gigabit Ethernet router, built to deliver top-end Wi-Fi 6 performance, true 2.5 gigabit routing throughput, and advanced service delivery capabilities. This quick start describes how to install ADTRANs Service Delivery Gateway. The SDG-8612/8614 series WiFi 6 2.5 Gigabit Router is an indoor gateway delivering premium multi-Gigabit services. Figure 1 illustrates the front and back of the SDG-8612 & SDG-8614 gateway. Product Specifications Ethernet SDG-8612: 1 x 2.5 Gigabit Ethernet RJ-45 WAN interface SDG-8614: 1 x SFP+cage WAN interface 4 x Gigabit Ethernet RJ-45 LAN interfaces 1 x 2.5 Gigabit Ethernet RJ-45 LAN interface WLAN Interface Compliant with IEEE 802.11 b/g/n/ac/ax Dual-Band Radios: 2.4 GHz 4x4 / 5.0 GHz 4x4 USB Interface 1 x USB3.0 (TypeA) interface Working Environment 41 F 104 F (5 C 40 C) Dimensions 185mm x 98mm x 98mm (H x W x D) Power Supply AC Input: 100~240 VAC @ 50/60Hz Figure 1. Front and Back of the SDG-8612 Gateway SDG-8614
(SFP+cage) Installing the SDG-8612 Gateway The following are guidelines for basic installation of the gateway. Package Contents ADTRANs WiFi 6 2.5Gigabit Router 15VDC/3A USB type C power adapter CAT.5E Ethernet cable Prior to Installation Before installing the equipment, inspect the gateway. If damage has occurred during shipping, file a claim with the carrier, and then contact ADTRAN Customer Support. Connecting the Gateway Figure 2 illustrates the installation (connection) options for the gateway. The following subscriber connections are available on the rear of the device:
1x 2.5Gigabit Ethernet port (RJ-45 Connector) LAN port 4x Gigabit Ethernet (RJ-45 Connectors) LAN 1-4 ports 1x 2.5Gigabit Ethernet port (RJ-45 Connector) - WAN port 1x USB 3.0 (Type A Connector) port To connect the subscriber Ethernet interfaces, refer to Figure 2 and insert a Category 5E (or better) RJ-45 cable into one of the LAN ports or the 2.5 Gigabit Ethernet port (WAN) until there is an audible click. Figure 2. Gateway Installation Connecting the Power Supply 1. Connect the end of the power adapter to the Power port on the bottom of the gateway. 2. Plug other end of the power adapter into the wall outlet. 3. Confirm that the power is connected properly. The Power LED should be lit on the gateway. Resetting the Gateway A reset button is available if the device needs to be rebooted. To reboot the device, press the Reset button on the rear panel of the gateway for 5 seconds or less. To reset the device to custom defaults, press the Reset button for 5 seconds or more. Set up Connect to http://192.168.1.1 from web browser, go through the instructions to complete the router mode setup. 1. Click on Set up a new Intellifi device. 2. Simply input 12345678 as the password, re-enter the 12345678 again, click on Set password. 3. Then click on Continue to the next page. 4. Press Next>, then press Router. 5. Type samplewifi as SSID, and type 12345678 as password, then press Continue. 6. Press Yes, set up Guest WiFi, Then press Finish to complete setup. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 31 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Operation of this device is restricted to indoor use only. Industry Canada statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause undesired operation of the device Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Caution:
(i) the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and Operations in the 5.25-5.35GHz band are restricted to indoor usage only. Avertissement:
(i) les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) pour les dispositifs munis dantennes amovibles, le gain maximal dantenne permis pour les dispositifs utilisant les bandes de 5 250 5 350 MHz et de 5 470 5 725 MHz doit tre conforme la limite de la p.i.r.e;
(iii) pour les dispositifs munis dantennes amovibles, le gain maximal dantenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie, selon le cas;
Les oprations dans la bande de 5.25-5.35GHz sont limits un usage intrieur seulement. Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 31 cm between the radiator & your body. D claration d'exposition aux radiations:
Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contr l. Cet quipement doit tre install et utilis distance minimum de 31 cm entre le radiateur et votre corps.