FCC ID: HDCBSAP304X Wireless 802.11abgn/ac Access Point

Off Solid Green Solid Green Off Flashing Green

(Fast) Flashing Green

(Slow) Flashing Orange

(Slow) Flashing Orange

(Fast) Solid Orange Flashing Orange *

Flashing Green*

Flashing Green*

Flashing Green*

Flashing Green*

Flashing Green*

Flashing Green*

CONFIGURING THE APPLICATION More detailed documentation for configuring the BSAP 3040/3045 is provided in the vWLAN Administrators Guide, available online at https://supportforums.adtran.com. BSAP 3040/3045 LED DESCRIPTIONS BSAP State 2.4GHz 5GHz 1 GE 2.5 GE Boot Loader Initialization Operating System Initialization LAN Initialization Discovering vWLAN Solid Green Solid Green Solid Green Solid Green Off Off Off Off Solid Green Off Off Off Solid Green Off Off Off Off Off Off Off Off Off Off Off Off N/A N/A N/A N/A N/A Solid Green Solid Green Solid Green Solid Green Firmware Upgrade

(Download) Firmware Upgrade (writing or verifying) Firmware Upgrade Complete Operational with No Activity on Radios Operational with Activity on Radios

* Flash speed varies with data rate. If the data rate is slow, LED flashes slowly. If the date rate is extremely slow, the LED may appear solid green. FCC RADIO FREQUENCY INTERFERENCE This device complies with Part 15 of the Federal Communications Commission (FCC) rules. The operation of this device is subject to the following two conditions:

1. 2. This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. Flashing Green

(2.4G LED only) Flashing Green (5G LED only) Solid Green Solid Green Solid Green Solid Green Solid Green N/A Off Off Off Off Off Additional safety and regulatory guidelines are given in the document Bluesocket Compliance Notice available online at https://supportforums.adtran.com. THIRD-PARTY SOFTWARE The software included in the Bluesocket 3040/3045 contains copyrighted software that is licensed under the GNU General Public License (GPL). For a list of third-party software and their licenses, go to http://www.adtran.com/software/EULA. You can obtain the complete corresponding source code of such software components from ADTRAN for a period of three years after our last shipment of this product by sending a money order or check for $5 to:

ADTRAN, Inc, P.O. Box 933638, Atlanta, GA 31193-3638 Please write GPL Source for product Bluesocket 3040/3045 in the memo line of your payment. This offer is valid to anyone in receipt of this information. BLUESOCKET 3040/3045 ACCESS POINT P/N 1700965F1, 1700966F1 HARDWARE The following items are included in your shipment:

Wall/hard ceiling/junction box metal mounting bracket Bluesocket 3040 (no external antenna connectors)/3045 (external antenna connectors) Access Point (BSAP) Metal mounting bracket hardware: four metal anchors with mounting screws for sheetrock, four plastic anchors with mounting screws for masonry Two T-rail mounting brackets (9/16 and 15/16) for flush and recessed drop ceilings 2.4 G

-

2 5 G

-

2 5G-1 2.4G-1 2.5 GE 1 GE 2.4GHz 5GHz 4

-

G 5 4

-

G 2.4 2.4G-3 5 G - 3 ANTENNAS The Bluesocket 3040 AP includes a total of 10 internal modular high efficiency PIFA omnidirectional antennas - four internal antennas with 6 dBi peak gain for the 5 GHz radio, four internal antennas with 4 dBi peak gain for the 2.4 GHz radio, one internal antenna with 3/5 dBi peak gain for the dual band scanning/security radio (2.4/5 GHz respectively) and one internal antenna with 4 dBi peak gain for the BLE radio. The Bluesocket 3045 AP includes a total of eight RP-SMA connectors for external antennas and two internal modular high efficiency PIFA omnidirectional antennas - four RP-SMA connectors for external antennas for the 5 GHz radio, four RP-SMA connectors for external antennas for the 2.4 GHz radio, one internal antenna with 3/5 dBi peak gain for the dual band scanning/security radio (2.4/5 GHz respectively) and one internal antenna with 4 dBi peak gain for the BLE radio. For a list of supported external antennas, refer to the Bluesocket Compliance Notice located online at https://supportforums.adtran.com. Make a note of the 12-character MAC address and serial number listed on the back of the BSAP 3040/3045 before mounting the BSAP to a wall or other surface. This information will be required during configuration. MOUNTING THE BSAP TO A WALL/HARD CEILING/JUNCTION BOX BSAPs should be positioned for maximum throughput and range between other APs and wireless client devices. Follow these instructions to mount the BSAP on an interior hard ceiling, wall, or junction box using the appropriate enclosed mounting kit:

1. BSAP 3045 only: Install the antennas (sold separately) onto the appropriate antenna ports. The antenna ports are labeled 2.4G-1 through 2.4G-4 and 5G-1 through 5G-4. The antennas are labeled 2.4G and 5G. 2. Using the metal bracket as template, mark the locations of the four mounting holes on the sheetrock wall, hard ceiling, or over a junction box. For sheetrock ceiling/walls: Press the point of the metal screw anchors into the sheetrock at the marks. Using a drill or Phillips-head screwdriver, drive the anchor into the sheetrock until the top is flush with the surface of the wall. For masonry walls: Using a 1/4-inch (6.35 mm) masonry drill bit, drill a hole 1.5-inch (38.1 mm) deep. Tap the anchor into the hole until the top is flush with the surface of the wall. 3. 4. 4 Copyright 2016 ADTRAN, Inc. All Rights Reserved. Quick Start Guide, 61700965F1-13B, October 2016 1 5. Drive the appropriate provided mounting screws through the metal bracket into the anchors until the bracket is secure against the wall. Slide the unit downward until the pegs are fully engaged. 6. Once the bracket is mounted on the wall, insert the mounting pegs into the keyed slots on the back of the unit. 7. 8. Using a screwdriver, drive the set screw into the hole to secure the unit to the bracket. 9. Optionally protect your BSAP with a Kensington cable lock (not provided) inserted in the security slot. Screw Hole Screw Hole Kensington Lock Slots Mounting Pegs Screw Hole Screw Hole Keyed Slots Set Screw RESET USB DC-IN CONSOLE 2.5 GE (POE) 1 GE Set Screw Hole MOUNTING THE BSAP TO A DROPPED CEILING BSAPs should be positioned for maximum throughput and range between other APs and wireless client devices.The BSAP 3040/3045 ships with two drop ceiling mounting brackets (9/16 and 15/16) to mount the BSAP on the ceiling tile separators of flush and recessed dropped ceilings. Follow these instructions to mount the BSAP to a dropped ceiling:

For the BASP 3045 only: Install the antennas (sold separately) onto the appropriate antenna ports. The antenna 1. ports are labeled 2.4G-1 through 2.4G-4 and 5G-1 through 5G-4. T-rail Flexible Tab Recessed Ceiling Mounting Bracket Stationary Tab Release Tab BSAP 3045 with Antennas Mounted Bracket Channels 2. SUPPLYING POWER TO THE BSAP The BSAP 3040/3045 does not have a power switch. It is powered on when connected to a network device that supplies PoE based on the IEEE 802.3at standard, an optional external 802.3at PoE+ injector (P/N 1700926F1), or an optional external 2 amp DC power adapter (P/N 1700963F1) connected to an AC power source. To use the external DC power adapter, connect the adapter to the DC-IN port on the back of the unit. The DC power adapter automatically adjusts to any voltage between 100 and 240 VAC at 50 or 60 HZ. No voltage range settings are required. To reduce potential safety issues, use only the AC adapter listed above or an ADTRAN approved equivalent. If the BSAP is used in a medical environment, it must use an IEC/EN 60601-1 compliant power adapter. Ethernet and PoE cables are intended for intrabuilding use only. Connecting this device directly to cables that run outside the building in which the unit is housed will void the user's warranty and could create a fire or shock hazard. If the BSAP is to be powered using a network device such as a switch, connect the 2.5 GE (POE) Ethernet port of the BSAP to the appropriate switchport. Obtain the IP address of the BSAP from the Dynamic Host Control Protocol (DHCP) server (based on the MAC address of the BSAP). DHCP is enabled by default. You can then use a Secure Shell (SSH) client to connect to the BSAP based on the instructions below. If the BSAP is powered using a PoE injector, connect the 2.5 GE (POE) Ethernet port of the BSAP to the OUT port of the PoE injector and connect the Ethernet port of the switch to the IN port on the PoE injector. Then proceed to SSH to the default IP address of the BSAP as instructed below. If the BSAP is powered using the optional DC power adapter, connect the Ethernet port of the BSAP to the Ethernet port of the computer. The proceed to SSH to the default IP address of the BSAP as instructed below. CONFIGURING THE BSAP WITH VWLAN AND AP DISCOVERY The BSAP 3040/3045 can be configured for use with the Bluesocket virtual wireless local area network (vWLAN). If you have installed vWLAN, and want to use AP discovery to configure the BSAP, follow these steps. For more information on the vWLAN and AP discover, refer to the vWLAN AP Discovery configuration guide available online at https://supportforums.adtran.com. 1. After powering the BSAP and connecting it to the network, allow the BSAP to discover the vWLAN appliance to receive its configuration information. This AP discovery process uses an algorithm that attempts discovery methods in this order: static configuration, Dynamic Host Control Protocol (DHCP) vendor option (43), Domain Naming System (DNS) discovery, and cached vWLAN information. If no response to the discovery request is received, the algorithm moves to the next method in the list (except when using static configuration, which never queries the other discovery methods). There are two additional network components that can be configured to facilitate AP discovery. First, an external DHCP server can be configured to assign IP addresses to APs associated with the vWLAN. When configuring the DHCP server, make sure to configure the Bluesocket DHCP Vendor option (43) on the server. Second, you can configure an external DNS server to resolve the name apdiscovery to the IP address of the vWLAN in the network environment. CONFIGURING THE BSAPS IP ADDRESS USING THE CLI By default, DHCP is enabled on the BSAP 3040/3045. However, if you need to statically configure the IP address or statically configure AP discovery for the BSAP, you can access the APs CLI using either a VT100 terminal emulation program or an SSH client. To access the AP CLI using a VT100 terminal emulation program, follow these steps:

1. Connect a DB-9 to RJ-45 serial cable (rollover cable) to the APs CONSOLE port, and connect the other end of the serial cable to the PC. 2. Open a VT100 terminal emulation program with the following settings: 115,200 data rate, 8 data bits, no parity bits, and 1 stop bit (no flow control). Select <Enter> to access the CLI. At the prompt, enter the user name adm1n and the password blue1socket. 3. To access the AP CLI using an SSH client, follow these steps:

1. 2. Ensure that the BSAP is connected to a controlling computer (using the provided RJ-45 Ethernet cable). Specify that the computers TCP/IP setting is On or Enabled by navigating to Control Panel > Network Connections and double-clicking the connection of your network interface card. Select Internet Protocol (TCP/

IP) and select Properties. Then specify that the TCP/IP setting is enabled. Set your PC to a static IP address of 192.168.190.2 with a subnet mask of 255.255.255.0. 3. 4. Next, access the BSAPs command line interface (CLI) using an SSH client. Open an SSH connection using the units default IP address (192.168.190.1) and port 2335 connected to the LAN1 port on the BSAP. To access the unit using vWLAN, and for more instructions about CLI configuration, refer to the Bluesocket vWLAN Administrators Guide, available online at https://supportforums.adtran.com. Align the appropriately sized mounting bracket at a slight angle to the T-rail. Rotate the bracket until the stationary bracket tabs slide onto the T-rail and the flexible bracket tabs snap over the T-rail. Align edges the ceiling mounting bracket with the bracket channels on the bottom of the BSAP shown in the figure. Slide the BSAP onto the bracket until you hear the bracket release tab snap into place. To remove the BSAP from the mounting bracket, use a screw driver to lift the bracket release tab and slide the BSAP off the bracket. 2. 3. 4. 2 Support - Phone: 888-423-8726 Quick Start Guide, 61700965F1-13B, October 2016 3

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-

-

-

-

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FOR MOBILE DEVICE USAGE Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 28 cm between the radiator & your body. Industry Canada statement:

This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and

(iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;

(iii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. FOR MOBILE DEVICE USAGE Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 32cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 32 cm de distance entre la source de rayonnement et votre corps. DETACHABLE ANTENNA USAGE This radio transmitter (IC: 2250A-BSAP304X / Model: BSAP-3040, BSAP-3045) has been approved by ISED to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 2250A-BSAP304X / Model: BSAP-3040, BSAP-3045) a t approuv par ISED pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Approved antenna(s) list Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

EN60950-1/A12:2011+A2:2013 EN 50385:2002 Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) -

General public EN 300 328 V1.9.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4GHz ISM band andusing wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE DirectiveEN 301 893 V1.8.1:2015 Broadband Radio Access Networks (BRAN); 5GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive EN 301 489-1 V1.9.2:2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.2.1:2012 17 V2.2.1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems Data Transmission Systems esky

[Jmno vrobce] tmto prohlauje, e tento [typ zazen] je ve shod se zkladnmi poadavky a je ve shod se zkladnmi poadavky a

[Jmno vrobce]

[Czech]

dalmi pslunmi u dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Dansk Undertegnede [fabrikantens navn]

[fabrikantens navn] erklrer herved, at flgende udstyr erklrer herved, at flgende udstyr [udstyrets

[Danish]

typebetegnelse] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. typebetegnelse]

Deutsch Hiermit erklrt Hiermit erklrt [Name des Herstellers], dass sich das Gert [Gertetyp]

[Gertetyp] in bereinstimmung mit

[German]

den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. 1999/5/EG befindet. Eesti Kesolevaga kinnitab Kesolevaga kinnitab [tootja nimi = name of manufacturer] seadme seadme [seadme tp = type of

[Estonian]

equipment] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. teistele asjakohastele stetele. English Hereby, [Adtran Adtran], declares that this [Wireless 802.11abgn/ac Access Point 802.11abgn/ac Access Point] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. the essential requirements and other relevant provisions of Directive 1999/5/EC. the essential requirements and other relevant provisions of Directive 1999/5/EC. Espaol Por medio de la presente Por medio de la presente [nombre del fabricante] declara que el declara que el [clase de equipo] cumple con los

[Spanish]

requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva os esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva os esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

[name of manufacturer] L [type of equipment]

[type of equipment]

[Greek]

L L L 1999/5/. L L L 1999/5/. Franais Par la prsente Par la prsente [nom du fabricant] dclare que l'appareil [type d'appareil]

[type d'appareil] est conforme aux

[French]

exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano Con la presente Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio]

[tipo di apparecchio] conforme ai

[Italian]

requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski Ar o [name of manufacturer

[name of manufacturer / izgatavotja nosaukums] deklar, ka deklar, ka [type of equipment /

[Latvian]

iekrtas tips] atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi iuo [manufacturer name]

[manufacturer name] deklaruoja, kad is [equipment type]

[equipment type] atitinka esminius reikalavimus ir

[Lithuanian]

kitas 1999/5/EB Direktyvos nuostatas. kitas 1999/5/EB Direktyvos nuostatas. Nederlands Hierbij verklaart Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel]

[type van toestel] in overeenstemming

[Dutch]

is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti Hawnhekk, [isem tal sem tal-manifattur], jiddikjara li dan [il-mudel tal mudel tal-prodott] jikkonforma

[Maltese]

tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar Alulrott, [gyrt neve gyrt neve] nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet megfelel a vonatkoz alapvet

[Hungarian]

kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Polski Niniejszym [nazwa producenta]

[nazwa producenta] owiadcza, e [nazwa wyrobu]

jest zgodny z zasadniczymi

[Polish]

wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. wymogami oraz pozostaymi s tosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus

[Nome do fabricante] declara que este [tipo de equipamento] est conforme com os requisitos est conforme com os requisitos

[Nome do fabricante]

[Portuguese]

essenciais e outras disposies da Directiva 1999/5/CE. essenciais e outras disposies da Directiva 1999/5/CE. Slovensko

[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi v skladu z bistvenimi zahtevami in ostalimi

[Ime proizvajalca]

[Slovenian]

relevantnimi doloili direktive 1999/5/ES. relevantnimi doloili direktive 1999/5/ES. Slovensky

[Meno vrobcu] tmto vyhlasuje, e [typ zariadenia] spa zkladn poiadavky a vetky prslun

[Meno vrobcu]

spa zkladn poiadavky a vetky prslun

[Slovak]

ustanovenia Smernice 1999/5/ES. ustanovenia Smernice 1999/5/ES. Suomi

[Valmistaja = manufacturer]

manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint]

[type of equipment = laitteen tyyppimerkint]

[Finnish]

tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. muiden ehtojen mukainen. Svenska Hrmed intygar [fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga Hrmed intygar str I verensstmmelse med de vsentliga

[Swedish]

egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. egenskapskrav och vr iga relevanta bestmmelser som framgr av direktiv 1999/5/EG.