FCC ID: V5MACR1552 Contactless Smart Card Reader

ACR1552U-M USB NFC Reader IV User Manual V1.01 Subject to change without prior notice info@acs.com.hk www.acs.com.hk Table of Contents 1.0. Introduction ................................................................................................................. 3 1.1. 1.2. 1.3. 1.4. 2.0. 3.0. USB NFC Reader .................................................................................................................. 3 Compact Design .................................................................................................................... 3 Firmware Upgradeable Feature ............................................................................................. 3 Multi-Platform Support ........................................................................................................... 3 Features ....................................................................................................................... 4 Typical Applications ................................................................................................... 6 4.0. Driver installation Procedure .................................................................................... 7 5.0. Technical Specifications .......................................................................................... 10 ACR1552U-M User Manual Version 1.01 Page 2 of 11 info@acs.com.hk www.acs.com.hk 1.0. Introduction Continuing the success of the ACR1252U-M, the ACR1552U USB NFC Reader IV is the fourth generation of ACSs USB NFC Reader. It is an NFC reader that can access various contactless smart cards following the ISO 14443 Type A & B, ISO 15693, and ISO 18092 NFC standards. It has a built-

in SAM (Secure Access Module) slot which can be used together with a SAM card for key diversification and mutual authentication, providing high-level security in contactless applications. 1.1. USB NFC Reader ACR1552U-M supports a wide range of types of contactless cards and tags, including ISO 14443 Type A & B, ISO 15693, ISO18092 NFC, MIFARE, FeliCa, SRI/SRIX, CTS, Innovatron, Picopass, Topaz card and NFC tags. This makes it the ideal device for a broad range of solutions, such as hands-free verification for physical and logical access control, and inventory tracking. ACR1552U-M has USB 2.0 full speed for PC-linked operation. Additionally, it can read/write card at speed of up to 848 kbps for contactless smart card and NFC device access. 1.2. Compact Design With a compact design and powered by USB port, ACR1552U-M is extremely portable and convenient for use anytime, anywhere. 1.3. Firmware Upgradeable Feature To save valuable cost and time, the firmware of ACR1552U-M could conveniently be upgraded in-field to allow users to cope with the fast-changing technology for their applications in order to suit different scenarios. 1.4. Multi-Platform Support ACR1552U-M is a PC/SC and CCID-compliant reader. With driver support on different platforms, ACR1552U-M can operate in Windows, Linux, macOS and AndroidTM operating systems. ACR1552U-M User Manual Version 1.01 Page 3 of 11 info@acs.com.hk www.acs.com.hk 2.0. Features USB NFC Smart Card Reader (Contactless) USB 2.0 Full Speed Interface Plug and Play CCID support brings utmost mobility1 USB Firmware Upgradeability2 Contactless Smart Card Reader:

o Supports ISO 14443 Type A and B cards o Supports ISO 15693 cards o Supports ISO 18092 NFC o Supports MIFARE (T=CL), FeliCa, NFC Tags o Supports SRI/SRIX, CTS, Innovatron, Picopass, Topaz Card o Built-in antenna for contactless tag access, with a reading distance of up to 70 mm

(depending on tag type) o Built-in anti-collision feature (only one tag is accessed at any time) o NFC Support:

o Card reader/writer mode o Card emulation mode o Keyboard emulation mode Application Programming Interface:

o Supports PC/SC3 o Supports CT-API (through wrapper on top of PC/SC) Supports Windows, Linux, macOS, and AndroidTM operating systems. Built-in Peripherals:

o One user-controllable bi-color LED o One user-controllable buzzer Compliant with the following certifications and standards:

o CE o UKCA o FCC o RoHS o REACH o WEEE o J-LIS o VCCI o KC 1 Applicable under PC-linked mode 2 Same as above 3 Same as above ACR1552U-M User Manual Version 1.01 Page 4 of 11 info@acs.com.hk www.acs.com.hk o Microsoft WHQL o o o ISO 14443 ISO 15693 ISO 18092 o PC/SC o CCID ACR1552U-M User Manual Version 1.01 Page 5 of 11 info@acs.com.hk www.acs.com.hk 3.0. Typical Applications e-Government e-Banking and e-Payment e-Healthcare Transportation Network Security Access Control Loyalty Program Smart Poster/URL Marketing ACR1552U-M User Manual Version 1.01 Page 6 of 11 info@acs.com.hk www.acs.com.hk 4.0. Driver installation Procedure The installation procedure is the same for ACS PC/SC Driver version 1.0.4.0 and above. The latest device drivers of the ACS Smart Card Readers may be downloaded from the ACS Driver Download Webpage:

http://acs.com.hk/en/drivers/

To install the ACS Driver:

1. In the ACS PC/SC Driver folder, run the file Setup.exe. 2. Choose the language, and then click OK. 3. The Setup Wizard will be displayed. Click Next to proceed with the installation. ACR1552U-M User Manual Version 1.01 Page 7 of 11 info@acs.com.hk www.acs.com.hk 4. Click Next to install the driver to the default folder located at C:\Program Files\Advanced Card Systems Ltd\ACS PCSC Driver 1.0.4.0\, with C as the drive letter of your local drive. Otherwise, click Change to choose another destination folder. 5. Click Install to begin the installation. ACR1552U-M User Manual Version 1.01 Page 8 of 11 info@acs.com.hk www.acs.com.hk 6. Wait for the installation process to finish. 7. Once the driver installation is finished, click Finish to exit the setup wizard. ACR1552U-M User Manual Version 1.01 Page 9 of 11 info@acs.com.hk www.acs.com.hk 5.0. Technical Specifications Unit: mm macOS is registered trademarks of Apple Inc., registered in the U.S. and other countries. Windows is a trademark of Microsoft Corporation in the United States and/or other countries. AndroidTM is trademarks of Google LLC. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. ACR1552U-M User Manual Version 1.01 Page 10 of 11 info@acs.com.hk www.acs.com.hk FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. ACR1552U-M User Manual Version 1.01 Page 11 of 11 info@acs.com.hk www.acs.com.hk

fy Of 02 01 00Z06 08 oz 09 OS Ov O 02 np

| OL OOL06 08 02 09 os oF o oz Be

ACR!

PIN: A Power SIN: R The devic Rules. Of two condi harmful in accept ar interferenc FCC ID: Vv sulin livtinnlnilini 10 20 30 40 50 60 70 8 i O OF OS 09 HTT iS) Ad 552U-M

\CR1552U

: SVDC, 3 R620-XX!

e complies with eration is sub ions: (1) this terference, and ny interference e that may caus SMACR1552 MO 02 OF OF OS oz 08 o6 001, MTT I-M E 00ma I XXXX

) Part 15 of the ject to the fol evice may not |

(2) this device received, incl e undesired oper I 09 O24 08 06 (

ard Syste beac oe

(0a owe tang ation ROH:

Complia TT VOLO} 0 0 IS 09 OZ 08 0 ITT TTT NTT i vy OS 09 OL 0 6 00201 oz o TTT TTT NTT LOT 8 06 (OZO! 0:

E Ob OS 09 OZ TTT nul 2 OF 0

. 08 O mn

Advanced Card Systems Limited Address: Units 4108 - 4110, 41st Floor, Manhattan Place, 23 Wang Tai Road, Kowloon Bay, Hong Kong Tel.: +852 2796 7873 E-mail: chiho.wong@acs.com.hk Attestation Letter Date: 2023-09-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: VSMACRI1552 Advanced Card Systems Limited certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Chi Ho Wong Director CFR 47 2.911(d)(5)(i) Attestation Letter

Advanced Card Systems Limited Address: Units 4108 - 4110, 41st Floor, Manhattan Place, 23 Wang Tai Road, Kowloon Bay, Hong Kong Tel.: +852 2796 7873 E-mail: chiho.wong@acs.com.hk Attestation Letter Date: 2023-09-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: VSMACRI552 Advanced Card Systems Limited certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely Yours, Chi Ho Wong Director CFR 47 2.911 (d)(5)(ii) Attestation Letter

Advanced Card Systems Limited Address: Units 4108 - 4110, 41st Floor, Manhattan Place, 23 Wang Tai Road, Kowloon Bay, Hong Kong Tel.: +852 2796 7873 E-mail: chiho.wong@acs.com.hk FCC Authorization Date: 2023-09-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Advanced Card Systems Limited hereby authorizes China Certification ICT Co., Ltd

(Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Chi Ho Wong Director QA-FR-170-B

Advanced Card Systems Limited Address: Units 4108 - 4110, 41st Floor, Manhattan Place, 23 Wang Tai Road, Kowloon Bay, Hong Kong Tel.: +852 2796 7873 E-mail: chiho.wong@acs.com.hk FCC Confidential Authorization Date: 2023-09-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: VSMACRI1552 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Advanced Card Systems Limited hereby requests long-term confidential treatment of information accompanying this application as outlined below:

e Block Diagram e Schematics e Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Chi Ho Wong Director

U.S. AGENT LETTER OF ATTESTATION Date: 2023-09-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID: VSMACR1552 Advanced Card Systems Limited certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Advanced Card Systems Limited accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: benjamin.kaur@iconsigh.com Signed by (printed name): Benjamin Kaur Signature:

Applicant: Advanced Card Systems Limited Address: Units 4108 - 4110, 41st Floor, Manhattan Place, 23 Wang Tai Road, Kowloon Bay, Hong Kong FRN: 0017542937 Tel: +852 2796 7873 Email: chiho.wong@acs.com.hk Signed by (printed name): Chi Signature: . fs ignature lk 4 wW, a Ben gow Fawr