WIRING DIAGRAMS 24.11 AISLE SENSORS CONNECTION The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 128 24.12 SPEED SENSOR CONNECTION WIRING DIAGRAMS The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 129 WIRING DIAGRAMS 24.13 SHOCK SENSOR CONNECTION 130 The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 25 DATA SHEET OF THE COMPONENTS OF THE SYSTEM 25.1 SENSOR DATA SHEET OF THE COMPONENTS OF THE SYSTEM The Sensor is positioned around the vehicle, and generates 2 alarm/detection zones around the vehicle:
Code PLX SAFEMOVE SENS 4 Pre-Warning up to 50 m Warning up to 5 m The sensor also detects the presence of other vehicles in the Pre-Warning area up to 100 m. This function is enabled only after activating the SOFTWARE LICENCE and purchasing the Vehicle-vehicle Module. The number of sensors may vary depending on the needs. The basic KIT includes 3 sensors, but there can be up to 8 sensors with an additional module. The sensor does NOT work if it is not connected to the HUB: P LX SAFEMOVEHUB 4. TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE 12-24 V MAXIMUM POWER (absorbed by HUB) OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT DIMENSIONS 18W
-20C +60C IP67 0.3 kg 157mm x 95mm x 54mm 74271132S PSMSN002M002 ACCESSORIES INCLUDED Black snap ferrite Double-U joint The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 131 DATA SHEET OF THE COMPONENTS OF THE SYSTEM 25.2 HUB Code PLX SAFEMOVE HUB 4 The HUB is the device in charge of managing the sensors. It has a communication connection towards the CPU and 3 connections towards the sensors. The number of sensors managed can be extended up to 8 with suitable expansion devices. TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE 12-24 V MAXIMUM POWER (1-4 sensors) MAXIMUM POWER (5-8 sensors) OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT DIMENSIONS 20W 40W
-20C +60C IP65 0.9 kg 122mm x 145mm x 82mm RELAY CHARACTERISTICS MAXIMUM COMMUTABLE VOLTAGE 30 V MAXIMUM CURRENT 1 A SERVICE LIFE COMMUTATION SPEED 5 000 000 CYCLES 18000 CYCLES /h ACCESSORIES INCLUDED 74271132S Black snap ferrite SALXANT433EXSF0002 External antenna, 433 MHz The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 132 25.3 WEARABLE TAG DATA SHEET OF THE COMPONENTS OF THE SYSTEM Code PLX TAGSAFETY 3T Clip for band Slot for strap Snap fastener Use the screws supplied: 2.2 X7 Use the screws supplied: 2.2 X6 Use the screws supplied: 2.2 X7 With the wearable Tag, pedestrian workers can be detected by the EGOpro Safe MOVE 4.0 system either in Pre-Warning or in Warning. The Tag is powered by a lithium button cell battery that is easy to replace. The case is ergonomic and its upper cover is made of rubber. It is supplied together with a series of accessories thanks to which it can be worn in different ways, such as neck strap, waist clip and snap fastener. TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE MAXIMUM POWER BATTERY TYPE OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT DIMENSIONS 3 V 50mW 2450
-20C +60C IP 55 65g 50mm X 24mm X 66mm ACCESSORIES INCLUDED WAIST CLIP RING FOR STRAP SNAP FASTENER CR2450 BATTERY The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 133 DATA SHEET OF THE COMPONENTS OF THE SYSTEM 25.4 HELMET TAG Code PLX TAGSAFETY 3TH The helmet Tag has the same functions as the wearable Tag, but it has been designed to be affixed to safety helmets. It uses two-antenna architecture for Pre-Warning located inside flexible wings fitted with suitable adhesive for polyethylene and HD polyethylene, the material with which safety helmets are made. It is powered by a 2450 button cell battery that is easy to replace. The Tag is put on the helmet in the way described in section 7.1. TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE MAXIMUM POWER BATTERY OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT (g) DIMENSIONS 3 V 50mW 2450
-20C +60C IP 55 75g 362 X 24 X 76 mm ACCESSORIES INCLUDED Cleansing napkin CR2450 BATTERY The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 134 25.5 CONTROL UNIT DATA SHEET OF THE COMPONENTS OF THE SYSTEM Code P LX SAFEMOVE CPU The CPU of the EGOpro Safe Move 4.0 system is the core of the system. All devices must be connected to a CPU via a Data Bus. It manages everything related to configurations, data logging and the activation of other functions compatible with the system (e.g., speed reduction). These elements are connected to the CPU: display sensors power supply Furthermore, two USB ports are available for downloading data/updates/maintenance, two relay contacts, I/O, LAN (POE type), GPS antenna connector (optional). TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE 12-24 V MAXIMUM CURRENT (WITH DISPLAY) 1.5 A POWER CONSUMPTION (WITH DISPLAY) 15W POWER CONSUMPTION ON STBY 1W
-20C +60C OPERATING TEMPERATURE IP 20 DEGREE OF PROTECTION WEIGHT (g) 1kg DIMENSIONS 213mm x 154mm x 75mm NUMBER OF RELAY OUTPUTS 2 (see table below) LOGIC INPUTS 2 (0-24 V LOGIC OUTPUTS 2 (0-24 V 232 SERIAL OUTPUTS 1 10/100 ETHERNET POE TYPE B OPTIONAL USB 2.0 LAN PORT USB PORT
) MAXIMUM COMMUTABLE VOLTAGE 30 V RELAY CHARACTERISTICS MAXIMUM CURRENT SERVICE LIFE COMMUTATION SPEED 1 A 5 000 000 CYCLES 18000 CYCLES /h OPTIONAL ACCESSORIES GPS WITH EXTERNAL ANTENNA The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 135 DATA SHEET OF THE COMPONENTS OF THE SYSTEM 25.6 DISPLAY Code P LX SAFEMOVE DIS By means of visual and sound alarms, the Display warns the driver, in real time, about the presence and position of pedestrian workers/vehicles with an active Tag entering the danger areas around a vehicle in motion. The display is connected to the control unit by means of a sole 2.5m-long cable that has a bayonet connector at its end. TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE 12-24 V MAX. POWER CONSUMPTION (by CPU) 3 W OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT (g) DIMENSIONS RESOLUTION TOUCH SCREEN TYPE
-20C +60C IP 20 1.2 kg 178mm x 115mm x 60mm 800 x 600 RESISTIVE ACCESSORIES CONNECTION CABLE (L=2.5m) FASTENING JOINT PSMSN002M002 The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 136 25.7 INHIBITOR DATA SHEET OF THE COMPONENTS OF THE SYSTEM Code P LX FILTER SENS The inhibitor (P LX FILTER SENS) is a device used to delimit a zone within which, in accordance with the client's safety needs defined, the Tags are temporarily disabled. This device is found in the cabin of the vehicle; in this way, the driver can wear the Tag while driving. When the TAG is outside the range of action of the device, it is reactivated after 3 seconds so that the driver is safe when outside the vehicle. TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE MAXIMUM POWER OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT DIMENSIONS 12-24 V 18W
-20C +60C IP67 0.3 kg 157mm x 95mm x 54mm 74271132S PSMSN002M002 ACCESSORIES INCLUDED Black snap ferrite Double-U joint The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 137 DATA SHEET OF THE COMPONENTS OF THE SYSTEM 25.8 SPLITTER Code P LX SPLITMOVE04 The splitter is an element of the system if more than three sensors are to be fitted on the vehicle. 138 TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE MAXIMUM POWER OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT DIMENSIONS 12-24 V 0.6W
-20C +60C IP65 0.9 kg 122mm x 145mm x 82mm The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 25.9 INDOOR SPEED SENSOR DATA SHEET OF THE COMPONENTS OF THE SYSTEM Code P LX SEN AD The indoor speed sensor is a radar module to measure vehicle speed, even if there is no GPS signal. With the speed sensor, the speed signal is also received indoors since an external signal is not necessary for operation. Please, keep in mind that the speed sensor does not supply data about the vehicle position, only the speed. TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE MAXIMUM POWER OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT DIMENSIONS 12-24 V 0.72W
-20C +60C IP65 0.25 kg 64mm x 74mm x 41mm ACCESSORIES INCLUDED Black snap ferrite Speed sensor steel joint 74271132S SMSNDHA0100 The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 139 DATA SHEET OF THE COMPONENTS OF THE SYSTEM 25.10 SHOCKS SENSOR Code P LX SEN SK The indoor speed sensor is a radar module to measure vehicle speed, even if there is no GPS signal. With the speed sensor, the speed signal is also received indoors since an external signal is not necessary for operation. Please, keep in mind that the speed sensor does not supply data about the vehicle position, only the speed. TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE MAXIMUM POWER OPERATING TEMPERATURE DEGREE OF PROTECTION WEIGHT DIMENSIONS 12-24 V 0.72W
-20C +60C IP65 0.25 kg 64mm x 74mm x 41mm 74271132S Black snap ferrite ACCESSORIES INCLUDED The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 140 The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission. 141 142 Exclusively to the following activities: research, development, design, manufacturing, maintenance and after-sales service of electronic systems Advanced Microwave Engineering S.r.l. Via Lucca 50-54, 50142 Florence, Italy Tel.: +39 055 73921 E-mail: info@ameol.it Website: www.ameol.it The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l. These materials and information are intended solely for the purpose designated and may not be used otherwise. It is not permitted to disclose or reproduce them in whole or in part without express written permission.