wilinnoSent Innovative Sensor Technology Installation Manual IVS-947 anced Version 1.3 - 02.05.2019 in Germany PRODUCT K-Band Transceiver Movement Velocity _ @ Direction APPLICATI e Traffic Monitoring lM Presence M Distance e Industrial Applications Angle DESCRIPTION The IVS-947 provides an advanced 24GHz MMIC Design. The module can be used in CW / FSK /
FMCW/-mode. This design includes an RF prescaler for transmit frequency reference. The prescaler output is 2.94MHz. ADDITIONAL INFORMATION InnoSenT Standard Product. Changes will not be notified as long as there is no influence on form, fit and within this data sheet specified function of the product. CONFIDENTIAL AND PROPRIETARY The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing. ey
S
) n S
CERTIFICATES InnoSenT GmbH has established and applies a quality system for: development, production and sales of radar sensors for industrial and automotive sensors. RoHS-INFO This product is compliant to the restriction of hazardous substances (RoHS - European Union directive 2011/65/EU). Innovation in Radar Technology wilinnoSent Innovative Sensor Technology ELECTRICAL CHARACTERISTICS PARAMETER CONDITIONS SYMBOL UNITS Transmitter transmit frequencies varactor tuning voltage varactor input impedance tuning slope AP. power drift over temp. Receiver ee [ee self clutter is the signal measured at the IF output (without enclosure) due to modulation when no target is present. Antenna System Pattern (compare with antenna plot on page 4) a a a om S 2 n
CONFIDENTIAL AND PROPRIETARY The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing. __Ihmovation in Radar Technology wilinnoSent Innovative Sensor Technology ELECTRICAL CHARACTERISTICS PARAMETER CONDITIONS SYMBOL UNITS Frequency Divider Peak to peak voltage Power supply supply voltage V Prescaler supply voltage Vv supply current mA Prescaler supply current mA Environment operating temperature C storage temperature C
Mechanical Outlines (compare with mechanical outlines on page 5) =
5 2 outline dimensions mm 2 CONFIDENTIAL AND PROPRIETARY The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing. __Inovationin Radar Technology wilinnoSent Innovative Sensor Technology TX- ANTENNA PATTERN Antenna Orientation:
-10 15
-20 normalized gain [dB]
-25
-30
-35 o cS 2 n
-40 x oO
-180,0 -150,0 -120,0 -90,0 -60,0 -30,0 0,0 30,0 60,0 90,0 120,0 150,0 180,0 =
angle []
een SSCSCSC*dCnes |
eon Sines | pd a CONFIDENTIAL AND PROPRIETARY The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing. Innovation in Radar Technology wiinnoSenT Innovative Sensor Technology INTERFACE The sensor provides a 2.5mm grid, single row pin header (square pin 0 0.635mm). PIN # DESCRIPTION IN / OUT COMMENT TX on active high / enable TX-power / internally pulled up to +3.3V with 10kOhm / pull down to GND to disable 2 enable ABU active low / enable OSC + LNA/ internally pulled up to VCC with P 10kOhm / pull down to GND to enable 3 supply voltage +3.3V 5 signal I(nphase) 6 ei output | signal Q(uadrature) 7 a do not connect 8 divider output (Tx / 8192) 9 supply voltage divider +3.3V 10 tuning voltage (0.7...2.5V) 11 linc do not connect 12 line | do not connect MECHANICAL OUTLINES top view side view 9.9 o c 2 2
1.9 antenna centroid rotational pivot bottom view 12.4 connector view 25.4 Label content:
IVS-947 S/N: 8-digit DataMatrixCode CONFIDENTIAL AND PROPRIETARY The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing. Innovation in Radar Technology wilinnoSent Innovative Sensor Technology Changes or modifications made to the equipment not expressly approved by InnoSenT GmbH may void the FCC / IC authorization to operate this equipment. The use of the transceiver module is authorized in mobile or fixed host devices taking into account the conditions listed below:
OEM Integrator must ensure that the end user manual may not contain any information about the way to install or remove the module from the final product. Depending on the final host device additional authorization requirements for the non-transmitter functions of the transmitter module may be required (i.e., Verification, or Declaration of Conformity) The OEM integrator is responsible for ensuring that after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. The information on the label and in the user manual is required to be incorporated in the user manual of the final host. see 47 CFR15 requirements for more details (e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES) e Additional label with the words Contains FCC ID:AAABBBBB and Contains IC:AAAA-BBBB shall be applied and visible from the outside of the host product. e The module must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the module. e The end user manual for the final host product operating with this transmitter must include operating instructions to satisfy RF exposure compliance requirements. Radiofrequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. When the final host product operating with this transmitter deviate from above, installation of this module into specific final hosts may require the submission of a Class II permissive change application containing data permanent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Feel free to contact us if additional guidance is required. Manual Requirements according 15.19 / RSS-GEN This device complies with Part 15 of the FCC Rules [and with Industry Canada licence-exempt RSS standard(s)]. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Manual Requirements according 15.21 Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment. CONFIDENTIAL AND PROPRIETARY The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing. om S 2 n
wilinnoSent Innovative Sensor Technology ESD-INFORMATION This InnoSenT sensor is sensitive to damage from ESD. Normal precautions as usually applied to CMOS devices are sufficient when handling the device. Touching the signal output pins has to be avoided at any time before soldering or plugging the device into a motherboard. APPROVAL This Data Sheet contains the technical specifications of the described product. All previous versions of this Data Sheet are no longer valid. The sensor uses Hydrocarbon based material which may change its dielectric properties when used in an oxida-
tive environment. This may vary based on temperature. Therefore InnoSenT recommends evaluating this influ-
ence within the specific environment. om Ss 2 n
VERSION DATE COMMENT