FCC ID: 2A3NL-AIMIC-M6PRO AI Conference Speakerphone

AI Conference Speakerphone User Manual Product introduction AIMIC-M6 Pro is an intelligent conference microphone speaker launched by AISPEECH. Its specially designed for small collaboration rooms, small meeting rooms, open spaces, and remote office scenarios. This product integrates audio collection, amplification capabilities. It adopts a 6-unit omnidirectional microphone array and proprietary audio algorithms to achieve functions such as omnidirectional pickup within 4 meter radius, directional pickup, AI noise reduction, echo cancellation and two-way communication. It solves common pain points in meetings, such as un-

clear remote communication and difficult meeting summary preparation. The directional pickup function of this product provides users with ex-

clusive pickup zones, effectively blocking all sound interference from other angles,and improving remote communication efficiency. Applicable scenarios: small collaboration rooms, small meeting rooms, open spaces, and remote office. Product introduction Accessories List Speakerphone Storage Bag User Manual Bluetooth dongle Product introduction Buttons and indicator lights instructions Volume/Battery indicator on off Volume indicator Maximum volume Minimum volume Battery indicator

(short press power button) Battery90%

Battery 20%

Directional Voice Pickup Press to enable/disable 1 meter 90 Status indicator light Light on: enabled Light off: disabled Product introduction Buttons and indicator lights instructions Vlume down Press to reduce volume Microphone Mute Press to switch microphone status AI Button Click to start or end AI tra-

nscription Volume up Press to increase volume Tip:AI transcription function needs to be used with the Mile Memo soft-

ware while the device is connected to the computer via USB. Product introduction Buttons and indicator lights instructions Power Press and hold 3 seconds to power on or power off Status indicator light Red light breathing:bettery low White light breathing:charging White light on:bettery full or not charging

*The indicator light stays on when the battery is fully charged. Headphone jack When headphone is plugged in, the device will switch audio output from the speaker to the headphone Bluetooth Press and hold 2 seconds to pair or disconnected Status indicator light Blue light flashingbluetooth pairing Blue light onBluetooth connected Instruction for use Ligth color instructions Status Light color Power on Partial green light on Powen off Light off Muted Red light on Start/End AI Partial green light flashing Upgrading Green light breathing 1.Device connection The device's initial Bluetooth name isAIMIC-M6 Pro****(the last four figures of S/N)

* Bluetooth connection 1Mobile phone connection After powering on device and activating Bluetooth, then turn on the Bluetooth function on your mobile phone and search for Bluetooth device named "AIMIC-M6 Pro****" for pairing and connection. Or you can enable the NFC function on your phone and tap the NFC logo Instruction for use area on the device to connect. The Bluetooth indicator light staying on indicates a successful connection. 2Computer connection After powering on device and activating Bluetooth, then open the Bluetooth settings page on your computer system. Select this device to pair and connect. The device's Bluetooth indicator light staying on indicates a successful connection. 3Bluetooth Dongle connection Plug in the Bluetooth dongle into the PC, conference host, or con-

ference display. After powering on the device activating Bluetooth function,then open the Bluetooth settings page on the computer system. Select this device for pairing. The Bluetooth indicator light staying on indicates a successful connection.

* USB connection Connect the device to computer via type-C USB data cable and you will hear a prompt tone when connected.Choose AIMIC-M6 Pro as input

/output audio device in system setting or in the online meeting software. Tip:This device does not support direct connection to the phone using an OTG data cable. Instruction for use 2.Directional Pickup 1Press the "Directional Pickup" button to enable this function and status light will turn to green. Point the directional pickup button towards the speaker, and it will suppress all sounds out-

side the directional pickup fan-shaped area, prioritizing the voice within the area. The directional pickup area has an angle of +/-

45 with the button as the center and 1meter radius. 2Press the "Directional Pickup" button to disable this function. The light will turn off, indicating function is deactivated. 3.Charging Instructions

* Charging 1When connected to computer via USB cable, the device enters charging mode regardless of whether it is powered on or off. 2If consumers use a power adapter for power supply, please purchase one which has obtained corresponding certification.

* Battery Level Check While the device is powered on, press the power button shortly to check the current battery level. 1Battery<20%the power button indicator light breath in red. 2Battery 20%the power button indicator light remain in white. Note: Output power of the power supply adapter should be less than 15W.It is recommended to charge the device one hour before using it for the first time to ensure sufficient battery power. Basic parameter Product name AI Conference Speakerphone Product model AIMIC-M6 Pro Product dimensions 125mm*125mm*35.5mm Bluetooth Bluetooth V5.1 Voice pickup distance 4 meters Microphone 6 omnidirectional microphones Speaker 5W*2 Battery capacity 2CCC 5000mAh Interface Headphone jack Charging input 5V 2A RF exposure statement This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Brand Owner: AISpeech Technology Co., LTD. Email:

Reference No.: WTX23X06143378W001/002 Page 1 of 14 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

bazath Ras basa AI Speech Co.,Ltd NO.14 Building, Ascendas iHub Suzhou, No.388 Xin Ping Street, Suzhou, China Date: 2023-09-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref. Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2A3NL-AIMIC-M6PRO To Whom It May Concern:

Al Speech Co.,Ltd certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ke Signatory .

[Song He, Senior Project Manager]

AI Speech Co.,Ltd Date: 2023-09-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.914 (d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2A3NL-AIMIC-M6PRO To Whom It May Concern:

Al Speech Co.,Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signatory Ser . Ko .

[Song He, Senior Project Manager]

AI Speech Co.,Ltd Date: 2023-09-08 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT. FCC Application for FCC ID: 2A3NL-AIMIC-M6PRO Confidentiality Request To whom it may concem, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

or External Photos Internal Photos For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 DO1. Test Setup Photos User Manual The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory Sons ks 4

[Song He, Senior Project Manager]

AI Speech Co.,Ltd Date: 2023-09-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC 1D: 2A3NL-AIMIC-M6PRO To Whom It May Concern:

|, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. | understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcfleas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User's Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, Signatory Song, ho

[Song He, Senior Project Manager]

AI Speech Co.,Ltd Date: 2023-09-08 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT. FCC Application for FCC ID: 2A3NL-AIMIC-M6PRO POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Al Speech Co.,Ltd are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory .

[Song He, Senior Project Manager]

AI Speech Co.,Ltd Date: 2023-09-08 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: 2A3NL-AIMIC-M6PRO Applicant FRN: 0031620354 US Agent - Attestation Statement / Part 2.911(d)(7) Al Speech Co.,Ltd certifies that, as of 2023-09-08, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2A3NL-AIMIC-M6PRO. Al Speech Co.,Ltd, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Al Speech Co.,Ltd for FCC ID: 2A3NL-AIMIC-M6PRO. Designated Agent Information:

Company Name: FCC US Agent, LLC U.S. Agent FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: Al Speech Co.,Ltd Designated Agent: FCC US Agent, LLC Company Representative:Song He Designated Agent Representative: Tim Payne Signature: Jog he \ Signature: