FCC ID: 2AKSOX02 W+ Link Transmitter

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains licence-exempt transmitter(s)/receiv-

er(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) L' appareil ne doit pas produire de brouillage;

(2) L' appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d' en compromettre le fonctionnement. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003.

(Cet appareil numrique de la Classe B conforme la norme NMB-003 du Canada) Company name:

Address:

Tel:

E-mail:

FCC ID: 2AKSOX02 IC: 23880-X02 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

AIAIAI ApS Studiestraede 31, Copenhagen K, 1455 Denmark Agent Authorization Company: AIAIAI ApS Address: Studiestraede 31, Copenhagen K, 1455 Denmark Product Name: W+ Link Transmitter Model Number(s): X02 Product Description: W+ Link Transmitter We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Company: AIAIAI ApS Adam Dupont Date: 2023-08-22

AIAIAI ApS Studiestraede 31, Copenhagen K, 1455 Denmark Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-25-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC 1D: 2AKSOX02

[AIAIA! ApS] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

{Applicant signature)

(Adam Dupont)

[dann Dup ent

AIAIAI ApS Studiestraede 31, Copenhagen K, 1455 Denmark Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-25-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AKSOX02

[AIAIAI ApS] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Adam Dupont) Ddows 0 upers

AIAIAI ApS Studiestraede 31, Copenhagen K, 1455 Denmark Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-08-25 Subject; Request for Confidentiality FCC ID: 2AKSOX02 To Whom It May Concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market, XX] Schematic Diagram

&] Block Diagram Parts List KX Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

[} External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Adam Dupont Peden Duper

AIAIAI ApS Studiestraede 31, Copenhagen K, 1455 Denmark Date: Aug. 24, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AKSOX02 US Agent Attestation Statement / Part 2.911(d)(7)

[AIAIAI ApS] certifies, that as of [Aug. 24, 2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AKSOX02 .

[AIAIAI ApS], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [AIAIAI ApS] for FCC ID: 2AKSOX02. Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: [AIAIAI ApS]

Designated Agent: FCC US Agent, LLC Company Representative: [Adam Dupont]

Tel: 004561669700 Email: aba@aiaiai.dk FRN: 0026147348 Signature:

Designated Agent Representative: Tim Payne Signature: