FCC ID: TA7-G3 Wi-Fi/BLE Gateway

G3 Wi-Fi / BLE Wi-Fi / BLE Gateway Wi-Fi / BLE Gateway Provides Wi-Fi Network Access for BLE Tags The AiRISTA Flow G3 gateway provides Wi-Fi network access for BLE tags. The low cost and long battery life of BLE tags make them desirable, but to exchange data over Wi-Fi networks they need a gateway device between BLE networks and Wi-Fi networks. This facilitates use cases like choke point detection, telemetry exchange and proximity detection for social distancing. G3 has a built in temperature and humidity sensor. The G3 gateway is a small AC powered device suitable for North American power outlets and many electrical outlet types for other countries using a plug adapter. It provides a low-cost method to communicate BLE information over Wi-Fi networks. BLE tags are convenient for their long battery life and low cost. But when a Wi-Fi network is used to exchange tag information, BLE-only tags require a dual BLE / Wi-Fi gateway to facilitate the communication. Small, cost effective device allows BLE tags to communicate over Wi-Fi networks The AiRISTA Flow G3 gateway uses an integrated eyelet to screw to the wall plate to deter theft. And the tactile button allows for user defined actions when necessary. The G3 gateway is small and deploys quickly. It can be used at choke points like doorways as BLE tags move past. And they can be used in hotel rooms or along production lines to create an umbrella of communication coverage. Companies want to maximize the investment in their Wi-

Fi deployments. But until the access points support an integral BLE radio, the G3 will be the gateway between BLE networks and Wi-Fi networks. Benefits Leverage the investment in Wi-Fi networks when deploying BLE tags Low cost Fast to deploy Support for popular BLE protocols Ideal for conference rooms, break areas, choke points, etc. Can be configured and monitored remotely Provides two-way communication with Airista Flow BLE Tags Features BLE 5.0 compliant Over the Air programmability Omni-directional antenna On/Off switch Theft deterrent eyelet securely attaches to electrical face plate Temperature and Humidity Sensor Copyright 2018 AiRISTA Flow, Inc. All rights reserved. a i r i s t a f l o w . c o m Technical Specifications Wi-Fi Radio Supported Wi-Fi Networks: 802.11 b/g/n Layer 2 Network Support: CCX, Blink Security: WEP, WPA2-PSK Supported Data Rates, 1, 6,11,54,72 Mbps Antenna:

Omni-directional antenna BLE Radio Blue-tooth Low Energy (BLE) Radio Electrical Interface AC Power: 100V to 240 VAC User Interface Tactile Button Warranty One Year Warranty Environment Operating Temperature: 32 to 122 F / 0 to 50 C Storage Temperature: -40 to 140 F / -40 to 60 C Humidity: 95 %

non-condensing, relative humidity Typical Operating Range Line of Sight:

180 ft/54 m @11Mbit/s Obstructions:

100 ft/30 m @11Mbit/s Physical Dimensions: 60mm x 35mm x 30mm Accessories

*Specifications subject to change without prior notice. Warning:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. RF exposure compliance statement: This device has been evaluated to meet the general RF exposure requirement Please ensure that the product is normally connected to the wifi network during use, and that the contact voltage is good during use, and there are no obstructions within 20cm to avoid poor zaoc signal strength causing the connection to be interrupted. ISED Statement:

This device complies with Part 15 of FCC Rules [ and contains license-exempt transmitter(s) that comply with innovationScience and Economic Development Canadas licence-exempt RSS Standar(s)]. Operation is subject to the following two conditions:

(1) This device may not cause interference; and(2) This device must accept any interference received, including interference that may cause undesired operation The digital apparatus complies with Canadian CAN ICES 3 (B)/

NMB 3(B). French: Lmetteur/rcepteurexempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et DveloppementconomiqueCanada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. l'appareil numrique du ciem conforme canadien peut 3 (b) /

nmb 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme l'exemption des limites d'valuation courante dans la section 2.5 du cnr - 102 et conformit avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnes canadiennes sur l'exposition aux champs rf et la conformit. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contr?l. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. AiRISTA Flow, Americas 913 Ridgebrook Rd. | Suite 110 Sparks, MD | 21152 | USA Tel: 1-844-816-7127 salesinfo@airistaflow.com AiRISTA Flow, APAC Level 9 Wyndham Building 1 Corporate Court Gold Coast |QLD | Australia Tel:+61- 07 3053 8375 copyright 2019 AiRISTA Flow, Inc. All rights reserved. AiRISTA Flow, EMEA Vaisalantie 4 | B-rakennus | 02130 Espoo | Finland Tel: +358-10-326-7600 salesinfo@airistaflow.com a i r i s t a f l o w . c o m

_quFWBLE Catone lb. Intertek 5018760 Model: G2, Input 100.240V~, 50-604 o 04 4 iw Airista Flow, Inc Made-In-China CERTIFIED TO CSA Gateway, Model: G3, Input: 100-240V~, 50.6014 lb. FE IC e Intertek _ista Flow, Inc SenitaeTo.csa 5018760 Madedn-China Srp. c2a.2easee ert

AiRISTA Flow, Inc. Agent Authorization Company: AiRISTA Flow, Inc. Address: 913 Ridgebrook Rd., Suite 110, Sparks, MD, 21152, USA Product Name: Wi-Fi/BLE Gateway Model Number(s): G3 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Sy Sajjad Title:

Chief Executive Officer Company:

AiRISTA Flow, Inc. Date:

Feb. 24, 2021

AiRISTA Flow, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: TA7-G3 Date: Feb. 24, 2021 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual Sincerely, Signature:

Name: Sy Sajjad Title: Chief Executive Officer