|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2019-12-04
|
|
1 2
|
2019-10-24
|
|
1 2
|
Applicant's complete, legal business name |
AirPatrol OU
|
|
1 2
|
FCC Registration Number (FRN) |
0028543965
|
|
1 2
|
Physical Address |
Sihi 42
|
|
1 2
|
Tallinn, N/A
|
|
1 2
|
Estonia
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
c******@ul.com
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
2ATKU
|
|
1 2
|
Equipment Product Code |
APW42
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
D****** D****
|
|
1 2
|
Title |
CEO
|
|
1 2
|
Telephone Number |
+372 ********
|
|
1 2
|
E-mail |
d******@airpatrol.eu
|
|
|
app
s
|
Technical Contact
|
|
1 2
|
Firm Name |
Liewenthal Electronics OU
|
|
1 2
|
Name |
D******** A********
|
|
1 2
|
Physical Address |
Parnu mnt 139a
|
|
1 2
|
Parnu mnt. 139a
|
|
1 2
|
Tallin, 11317
|
|
1 2
|
Estonia
|
|
1 2
|
Telephone Number |
+372 ********
|
|
1 2
|
E-mail |
d******@liewenthal.ee
|
|
|
app
s
|
Non Technical Contact
|
|
1 2
|
Firm Name |
Liewenthal Electronics OU
|
|
1 2
|
Name |
R****** T******
|
|
1 2
|
Physical Address |
Parnu mnt 139a
|
|
1 2
|
Parnu mnt. 139a
|
|
1 2
|
Tallin, 11317
|
|
1 2
|
Estonia
|
|
1 2
|
Telephone Number |
+372 ********
|
|
1 2
|
E-mail |
r******@liewenthal.ee
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | DTS - Digital Transmission System |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Communication Module |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 | Purpose / Application is for | Class II Permissive Change |
| 1 2 | Change in Identification |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | Limited Modular Approval. Output power listed is Conducted(Maximum peak). Separate evaluation must be required for any portable configuration. Host systems must provide regulated supply voltages to the module. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Additional host systems will require reassessment due to the lack of voltage regulation and use special test jig board.
Class II Permissive Change for a change of antenna circuit trace layout design for a specific host product as described in the filing. |
| 1 2 | Limited Modular Approval. Output power listed is Conducted(Maximum peak). Separate evaluation must be required for any portable configuration. Host systems must provide regulated supply voltages to the module. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Additional host systems will require reassessment due to the lack of voltage regulation and use special test jig board |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
UL International Germany GmbH
|
|
1 2
|
UL Japan, Inc. Head office EMC Lab.
|
|
1 2
|
Name |
B******** W********
|
|
1 2
|
T**** H********
|
|
1 2
|
Telephone Number |
49711********
|
|
1 2
|
+81-5********
|
|
1 2
|
Fax Number |
+81-5********
|
|
1 2
|
E-mail |
b******@ul.com
|
|
1 2
|
T******@jp.ul.com
|
|