AIRTECH INFORMATION & COMMUNICATION CO., LTD. FCC ID: ONKAT-100B JOB #: 606BK0 EXHIBIT #: 6A Users Manual Land Mobile Radio (LMR) Model: AT-100 A/B AT-200 AT-400 A/B Airtech Information & Communication Co., Ltd. General Features 1. Ultra compact design & size
(102 x 50 x 36mm, 310g with high capable battery) 2. Heavy durable construction 3. 90 channels 4. Alphanumeric LCD display up to 6 characters 5. 38 CTCSS/ 83 CDCSS 6. PC Programmable, transferable by cloning 7. Time-out timer (TOT) 8. Busy channel lock-out (BCLO) 9. Battery saving mode 10. Low battery alert 11. 2/5 tones programmable 12. 12.5KHz/25KHz channel spacing programmable 13. DTMF PTT-ID 14. Button lockable 15. Talking range to 5 miles 16. Transmit output power High/Low 17. DC7.5V Ni-MH battery GENERAL FEATURES .................................................2 UNPACKING..................................................................3 OPTIONAL ACCESSORIES .........................................3 GETTING READY..........................................................3 DESCRIPTION...............................................................4 LCD PANEL ...................................................................5 OPERATION ..................................................................6 ADDITIONAL FUNCTION .............................................7 CHARGER AND BATTERY ..........................................8 SPECIFICATIONS .........................................................8 AIRTECH INFORMATION & COMMUNICATION CO., LTD. FCC ID: ONKAT-100B JOB #: 606BK0 EXHIBIT #: 6B Unpacking Unpack and check that all items have been enclosed. Packing contents: radioantennabattery pack (1,350 mAH) belt clip hand strap charger users manual
Optional Accessories 1. External earphone & MIC. (APE10) 2. Additional battery pack (720 mAH, HM720)
AIRTECH INFORMATION & COMMUNICATION CO., LTD. FCC ID: ONKAT-100B JOB #: 606BK0 EXHIBIT #: 6C Getting Ready 1. Installation, Removal Belt Clip Installation: align the belt clip with the plastic slots of the battery pack. Slide the belt clip onto the battery pack, pushing firmly until a click heard. Removal: hold up the belt clip release tab with a fingernail or a coin (or like instrument). While holding up the release tab, slide the belt clip out and away from the battery pack. 2. Installation, Removal Battery Pack Installation: turn off the transceiver. Hold the transceiver with the back of the unit facing up. Place the battery pack against the back of the transceiver so that the tabs on the transceiver engage the four openings in the battery pack. Slide the battery pack toward the top of the transceiver until a click heard. Removal: turn off the transceiver. Hold the radio with the back of the unit facing up. With the thumbnail of your other hand slide the latch lever down. While holding the latch lever down, slide the battery pack down toward the bottom of the transceiver. Separate the battery pack from the transceiver. 3. Installation Antenna Rotate the antenna clockwise until it is seated firmly.
*. Before your starting operation, make sure the battery is fully charged. Description
volume control switch clockwise and control the volume.
Channel Select Button Select the desired channel with pressing Up and Down button, pressing and holding down more than 1 second makes the channel moving fast. And you can choose On or Off in function mode.
PTT(Push To Talk) Button Hold down to transmit, release to receive.
Function Button Refer to OPERATION page 7.
Monitor Button Press to monitor. Holding down over 2 seconds keeps monitoring function on, and press shortly again or PTT Button to stop.
LCD Display Panel Refer to next page.
Tx / Rx Indicate LED (3 colors) Red Green On Blinking On Blinking Orange On Transmitting Low battery Receiving, monitoring Different sub-tone when receiving Initializing, and cloning programming
Microphone Talk 5~7Cm in distance during transmitting.
Speaker
External Earphone/MIC and Programming Jack Socket
Battery Pack
Helical Antenna Power on / off and Volume Control Switch Turn the transceiver on by rotating power on / off and
AIRTECH INFORMATION & COMMUNICATION CO., LTD. FCC ID: ONKAT-100B JOB #: 606BK0 EXHIBIT #: 6D LCD Panel DISPLAY T SCN H L
FUNCTION Sub-tone Scanning Transmitt output power Beep sound Button lock Channel On Off PTT-ID Abnormal Abnormal Program Clone Cloning finished Cloning rightward) processing
(moves AIRTECH INFORMATION & COMMUNICATION CO., LTD. FCC ID: ONKAT-100B JOB #: 606BK0 EXHIBIT #: 6E Operation 1. Power Turn on / off and Volume Control Rotate the Power on/off and Volume Control Switch clockwise to turn power on, then the LED lights orange and powerup tone is generated after about on second, indicating the transceiver has passed the selfdiagnostic. When you turn on the transceiver, it comes same channel and function with your last using. Rotate this volume or switch clockwise counterclockwise to reduce the volume. Rotate it counterclockwise fully to turn power off. increase the to 2. Transmit Choose the channel by pressing Channel Select Button as you desire. Hold down the PTT Button and talk to MIC in 5~7Cm distance. The LED lights red on transmitting. Release to stop transmitting. the PTT button 3. Receive Choose the channel by pressing Channel Select Button as you desire. The LED lights green on receiving. In case the signal doesnt match in using subtone, green light blinks. 4. Monitor Press the Monitor Button to monitor. Holding down Monitor Button over 2 seconds keeps monitoring function on, and press Monitor Button shortly or press PTT Button to stop. 5. Scan Press Channel Select Button L while holding down Function Button to start scanning forward increasing channels. In case Priority Scan not settled down 1) mem 1ch > mem 2ch > mem 3ch > .. In case 1 cannel of Priority Scan is settled down 2) mem 1ch > pri ch > mem 2ch > pri ch > .. In case 2 cannels of Priority Scan are settled down 3) mem 1ch > pri 1ch > pri 2ch > mem 2ch > .. The transceiver stops scanning after detecting a signal and returns a receiving mode in the channel if the signal keeps for 2 seconds. Or re-start scanning automatically. And if detecting a signal while scanning, but in case of no matching sub-tone, re-starting scanning with a delayed Press Channel Select ButtonL to skip the channel. And if you press Channel Select ButtonM when the transceiver is receiving a signal in a channel while scanning, the transceiver doesnt scan the same channel in the next. And if you want to return the normal mode, press Channel Select Button L while holding down Function Button to finish scanning. When you press PTT Button while scanning, the transceiver transmits in the channel which received a signal last while scanning or LCD shows when its turned on. 6. Dual Watch The transceiver detects the channel LCD shows as well as another channel set as a dual watch channel upon DW mode. 7. Preference of Scan, Priority Scan & Dual Watch Turn on holding down Channel Select ButtonM. Then, the LCD shows SL-001. And you can settle down which channel can be scanned or not by pressing Function Button in each channel while moving the channels upward or downward with the Channel Select ButtonLM. And press the PTT button to finish. Then the LCD shows P1-000. Then, you choose a channel with the Channel Select ButtonLM. Then press the PTT button to finish. As well, P2-000 by the above same way. If you choose 000, it doesnt work. The LCD will show DW000 once registered Priority Scan. Then, also you can register a Dual Watch channel in same way as one of Priority Scan. 8. Beep Sound on / off AIRTECH INFORMATION & COMMUNICATION CO., LTD. FCC ID: ONKAT-100B JOB #: 606BK0 EXHIBIT #: 6F AIRTECH INFORMATION & COMMUNICATION CO., LTD. FCC ID: ONKAT-100B JOB #: 606BK0 EXHIBIT #: 6G When you press Function Button once sign on LCD blinks. (in case of being selected button lock function on blinks) Press Channel Select Button to select the beep sound on or off. Press PTT Button to finish selection. 9. Button Lock on / off When you press Function Button twice, sign on LCD blinks. Press Channel Select Button to select the button lock on or off. Press PTT Button to finish selection. This function prevents the channel by unintended pressing of Channel Select Button. Press Function Button once, sign on LCD blinks. Select off with Channel Select Button, then press PTT Button to set off. from changing 10. DTMF PTTID on / off When you press Function Button three times, dt sign on LCD blinks. Press Channel Select Button to select DTMF PTTID on or off. Press PTT Button to finish. 11. Transmit Output Power H / L While holding down PTT Button, press Channel Select ButtonL to set high power (it shows H on LCD) or press Channel Select ButtonM to set low power (it shows L on LCD. 12. 2/5 Tone Decode (Selcall) During initial radio programming by the technician this radio can be configured for several different types of decode operation. If a channel is selected that has Selcall activated the radio will be muted until the proper signal is received. When this occurs the radio can sound a ringing type alert signal or a voice message maybe heard. Depending upon the initial programming, pressing the PTT may cause an automatic identifier to be sent. When programmed for Selcall pressing the monitor and function buttons at the same time can cause the Selcall mode to be cancelled and generate an automatic identification. Please have your radio technician or dispatcher fully explain this operation. Additional Function 1. TimeOut Timer (TOT) It limits the amount of time you can continuously transmit on a channel from 0~100 seconds by a programmer. There will be a short prealert warning tone 4 seconds prior to the end of the transmission. Then the transmission is terminated and there will be a constant alert tone until you release the PTT Button. 2. Busy Channel LockOut (BCLO) It prevents from transmitting if any activity is detected on the channel. Programmer can do this feature. 3. Power Saving Mode If there is no transmitting and receiving for several time, the transceiver takes the power saving mode automatically for saving power. 4. Low Battery Alert The LED will blink red whenever pressed the PTT Button if the transceiver falls below a low voltage level. As well, whenever you release the PTT Button on low voltage level, there will be alert tone twice. Finally there will be alert tone three times and OFF sign on LCD then the operation is terminated. 5. Cloning You can clone from the transceiver to another. Connect the transceivers with the cloning cable. While pressing both of two Channel Select ButtonLM, turn the power on the transceiver which want to be cloned (LCD shows prog and indicate LED lights orange). While pressing the Monitor Button, turn the power on the original transceiver (LCD shows clon and indicate LED lights orange). Press the Monitor Button of the original transceiver again to start cloning (LCD shows moving right side). After 15 seconds approximately, the cloning finishes (the original transceivers LCD show good). Turn both transceivers power off and disconnect the cloning cable. AIRTECH INFORMATION & COMMUNICATION CO., LTD. FCC ID: ONKAT-100B JOB #: 606BK0 EXHIBIT #: 6H Charger and Battery 1. Battery (Ni-MH) HM-1350 HM-720 DC 7.5V Over 8 hrs Over 4 hrs Voltage Duty
(5-5-90) 2. Charger time Input power Charging time HM-1350 HM-720 Free voltage (AC90~250V) Appr. 100min Appr. 60min 0C~55C Operating temperature Connect the charger to electric power supply (free voltage AC 90~250 V). Turn the transceiver power off and put into front socket of the charger. The red light turns on during charging and the green light turns on when finished. When you put two batteries together, the front one charges first then the rear one starts charging.
* When you put the battery on rear cup of the charger for charging, charger checks voltage. If voltage is under 7.4V, the charger for 4 starts discharging minutes checks again. If voltage is still less than 7V, it discharges until voltage is 6V then starts charging. On Blinking Orange Green then Red the On On Specifications Blinking Charging Abnormal battery Fully charged Stand-by for charging
(rear cup) Dischargi ng Dimension
(HxWxD) Weight (With Battery) AT-200 AT-100 102x50x32mm 102x50x36mm (1,350mAH Battery) 150g (243g/310g)
(720mAH AT-400 Battery), Operating Voltage Operating Temp. Battery Life (H/L) 720mAH Battery 1,350mAH Battery Channels Privacy Codes Band Width Frequency Range FM Hum & Noise Rx Sensitivity Rx Spurious Response Rx Selectivity Rx Intermodulation Tx Power (H/L) Tx Spurious Rejection Audio Power (8) Frequency stability Tx Rx Tx Rx DC 7.5V
-30 ~ 60
(based on 5% Tx: 5% Rx: 90% STBY) 6hrs/8hrs 10hrs/15hrs 90 38 CTCSS, 83 CDCSS 12.5KHz/25KHz programmable 136~150
(A) 150~174
(B) Same as the above
-40 dB
-40 dB
-119 dBm (0.25uV)
-70 dB 400~430
(A) 440~470
(B) 216 223MHz
-70 dB
-70 dB
-70 dB
-65 dB 5W/2W
-65 dBc 500mW (Max.) 2.5ppm
-70 dB
-65 dB 3W/2W 5ppm
-70 dB
-65 dB 4.0W/2W 2.5ppm Standard units consist of Desk Rapid/Trickle Charger 1,350 mAH Ni-MH Battery Helical antenna ACR5-130/1.5 hrs HM-1350