WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6178165.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case AT&T WFEXT4981-41 AT&T ALL-Fi Booster A SIMPLE SETUP GUIDE UNPACK YOUR KIT Remove plastic protective covering Wi-Fi Extender Ethernet cable
(optionalfor a wired connection only) For use with AT&T Internet service and AT&T Wi-Fi coverage only. Not compatible with all Gateways. Check the compatibility with your Gateway at att.com/wifiextender Easy Setup Method Use AT&T Smart Home Manager AT&T 1. Download the Smart Home Manager app to your smartphone through your devices app store. Data charges may apply for app download and usage. Coverage and service not available everywhere. 2. Sign in with your User ID or AT&T Internet Member ID and Password. 3. Select Tools. 4. Select Install Smart Wi-Fi Extenders. Note: Data rates may apply for app download and usage. AT&T Smart Home Manager is available to AT&T Internet service customers with a compatible AT&T Wi-Fi Gateway. Limited to home Wi-Fi network. Features may depend upon Gateway models. Alternate Setup Method Power Up Pair 5-10 feet distance Power Broadband Phone Power Broadband Phone Place Power Broadband 20-40 feet Wi-Fi Gateway AT&T Smart Wi-Fi Extender Plug in Push Wait Press Press Wait Unplug Move the power cord to your Wi-Fi Extender and then plug it into a power outlet close to your AT&T Wi-Fi Gateway. the Power button on the back of the Wi-Fi Extender. about 2-3 minutes for the light to blink GREEN. the WPS the WPS button on button on your AT&T your Wi-Fi Wi-Fi Gateway. Extender.
(Make sure WPS is enabled.) Tip:
To make sure your setup is successful, make sure:
Both the 2.4GHz, 5GHz and 6GHz radio bands are enabled. For help, use the Smart Home Manager app or go to att.com/enhancedwifi If you have dual SSIDs make sure they have the same name and password about 3 minutes for the devices to automatically pair. The flashing light will turn solid GREEN when paired. Note: The light may turn off during pairing. This is normal. If it does not light up solid GREEN within 5 minutes, repeat the pairing process. your Wi-Fi Extender from the power outlet. your Wi-Fi Extender to its new location between your Wi-Fi Gateway and the area where you want a stronger signal. Tip: Max distance between nearest Gateway or Extender is 40 ft, two walls, or one floor away. Extenders work best placed on open surfaces away from large obstructions and things that can cause interference
(e.g., microwaves, wireless devices, etc.). Plug your Wi-Fi Extender into a power outlet and wait a few minutes for the connection to reestablish and the light to turn GREEN. Youre done!
Troubleshooting Is my Extender working?
Additional Information If you see one of these lights, move the Wi-Fi Extender closer to the Wi-Fi Gateway or another connected Extender. Solid red light Bad location Flashing red light Out of range If youre having trouble pairing your Extender with your Gateway, you can use the included Ethernet cable to connect your Extender to your Gateway and pair them manually. If you still have an issue, check your AT&T Internet service or Wi-Fi Gateway. Your AT&T Internet service needs to be active. You must have working AT&T Internet service and have a subscription to AT&T Wi-Fi Coverage for your Extender to work correctly. Check your connections. Check all cables and cords to ensure they are connected properly and securely. Power down, power up. Unplug the power cord from the back of your Wi-Fi Gateway. Leave it unplugged for 15 seconds and plug it back in. Then unplug the power cord from the back of your Extender. Leave it unplugged for 15 seconds and plug it back in. You may need to wait up to 3 minutes for your Gateway or Extender to completely reboot. Go to att.com/wifiextender for additional Extender support. Your Wi-Fi Network Name and Password do not change so it wont appear as a new network. To check if its working:
1. Your Extender is paired and functioning when the light is solid green. OR 2. Use the AT&T Smart Home Manager app to check if the Extender is on your network. (It will appear in the Devices section when its connected.) Get Smart Home Manager at att.com/smarthomemanager AT&T Smart Home Manager gives you easy access to your home network information in one convenient spot and can also be used to:
See whos on your Wi-Fi network. Personalize your device names, like Matts smartphone, or Monicas laptop. Invite guests to your Wi-Fi network with ease via text and email. Need more coverage?
Its easy! Go to att.com/betterwifi to purchase additional AT&T Smart Wi-Fi Extenders and increase Wi-Fi coverage in your home. Manage your account Available 24/7, download the myATT app at att.com/myattapp from your mobile device. Accessibility support Alternate format guides:
- Braille or large print: call 800.288.2020
- Accessible-tagged PDF: visit att.com/userguides Telephone equipment for visual and/or hearing impaired:
-Phone: 800.772.3140
-TTY: 800-651-5111 Hablas espaol? Visita att.com/userguides y haz clic en Ver en espaol al final de la pgina. Tambin puedes consultar la gua del extensor de seal Smart Wi-Fi de AT&T para ver ms detalles. Need more help?
Go to att.com/support Call us at 800.288.2020 and ask for technical support. 2020 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks are the property of their respective owners. ATT182840954 Printed on recycled paper. Please recycle. REVISION TABLE Change Point Ref. PN. PN. Date Change Notes MP-0000063190 MP-0000074139 MP-0000066550 MP-0000074139 MP-0000074385 FCC, 4920, AT-T, EN, Black/White, Single, R1, v 0 FSI, 4981, AT-T, EN, Black/White, Single, R0, v0 FSI, 4981, AT-T, EN, Black/White, Single, R1, v0 06.09.2018 09.05.2022 21.09.2022 added Pro 65 warning. added 2 page. change MP code Initial Release Removed 6GHz information text. Changed RF exposure distance as 20 cm Author MB MB Air4981 / AT&T / FCC and SAFETY
(Printed Material Specification) 315mm X 148mm 105mm X 148mm One page /Double sided Accordion type folding & No binding MP-0000074385 NOT PRINTING. THE PAGE FOLDING INFORMATION