Prntng Colors BACKGROUNDS COLOR C:60,M:60,Y:40,K:100 PANTONE 432C PANTONE 2603 C PANTONE 7548 C A6 Ar 7415B Generc QIG (Prnted Materal Specfcaton) Flat Dmenson 210x148mm Dmenson after bndng Cover Prntng Color Inner Prntng Color Cover page Materal Inner pages Materal Cover Pages Coatng Inner pages Coatng Bndng & Foldng Process Book Type Folding & No Binding Output lp 200 Lp Tolerance PART NUMBER MP-0000066020 colour prntng colour prntng 128g copperplate paper 128g copperplate paper varnshng varnshng L*W:1mm Ultra HD Wireless Set-Top Box USER MANUAL 1 Air 7415B AirTies Air 7415B is a state of the art IPTV / OTT Set-Top Box that provides access to next generation interactive digital television services over a broadband IP connection. The Air 7415B gives you access to Live TV Channels, Catch-up TV, some online video and radio applications on your UHD television. The following items are included in the box:
This user manual 1 x Air 7415B Set-Top Box 1 x Power Adapter 1 x IR Remote Control 2 x AAA Batteries 1 x Ethernet Cable 1 x HDMI Cable 2 Air 7415B FEATURES Please refer to the pictures below for front and rear panel interfaces. There is a standby button on the front panel with dual-color LED. When the device is not powered on, there will be no LED indication. When powered on, the LED color will turn blue. In standby mode, LED color will be red. Front Panel Back Panel A/V Out S/PDIF Ethernet 1 3 SETUP Please refer to the safety instructions included in the product box. INTERNET ADSL ETHERNET WIFI 12V 4 3 2 1 Reset On/O MODEM A/V Out S/PDIF Ethernet Air 7415B You can setup your Air 7415B quickly and easily by following the steps below:
1. Place the batteries provided into the remote controller as shown inside the battery room. 2. Connect the audio/video outputs of the Air 7415B to the audio/video inputs of your television using HDMI cable provided with the product. UHD video resolutions are only possible through the TV's HDMI ports supporting UHD and HDCP2.2. 3. Connect the Ethernet cable provided with the product to Air 7415B. 4. Connect the power adapter provided to the wall outlet and connect the other end to your Air 7415B. 5. The POWER LED will light up indicating that the unit is now powered up and ready for operation. 6. In order to display the video from Air 7415B, you may need to change the settings on your television set so that its input matches to the televisions physical connection to the Set-Top Box. When you press the POWER button on your remote control, the Air 7415B will go to standby mode. If you are facing any problems with your device please contact your Service Provider. 2 4 SPECIFICATIONS Video Properties
: MP@HL/ML MPEG-2
: AVC MP/HP @L4.2 H.264 H.265
: HEVC Main Profile up to 4Kp60 VP9
: up to 4Kp60 Audio AAC, Dolby Digital, Dolby Digital Plus, MPEG-1/2 Layers 1,2,3 I/O Ports Front Panel: Power LED and IR receiver Back Panel : A/V Out, HDMI Out, Ethernet, S/PDIF, DC Jack In Device Specifications Power Adapter: 100 - 240VAC, Output 12V 1A Dimensions: 100x100x20mm Storage Temperature/Humidity: -40C to +70C / 5% - 95%, non-condensing Operating Temperature/Humidity: 0C to +40C / 10% - 85%, non-condensing Dolby:
Manufactured under license from Dolby Laboratories Dolby and the double-D symbol are trademarks of Dolby Laboratories. Ths product makes use of software developed by the open source communty. Any such software s lcensed under the specfc lcense terms applcable to that partcular software (lke GPL, LGPL etc). Detaled nformaton on the applcable lcenses and lcense terms can be found on the devce's user nterface. By usng ths product, you acknowledge that you have revewed such lcense terms and that you agree to be bound by them. Where such terms enttle you to the source code of sad software, that source code wll be made avalable at cost upon request from ArTes. To obtan a copy of sad source code, please send your request n wrtng va emal to osrb@artes.com or va snal mal to:
ArTes Wreless Communcatons Mthat Ulunl Sokak No. 23 Esentepe, P.K. 34394 l ISTANBUL/Turkey ArTes wll mal to you a CD wth the requested source code at the cost of CD preparaton and shppng&handlng. For detals please contact osrb@artes.com For more information:
http://www.airties.com/products 3 MP-0000066020 REV30032018 Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:
This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.