WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6261205.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Change Point Ref. PN. PN. Part Description Date Change Notes Author Air 4980 / Air 4985 / Generic / Single Pack
(Printed Material Specification) Flat dimension 210mm x 148mm Dimension after binding 105mm x 148mm (A6) Pages Cover Printing Color Inner Printing Color Cover page Material Inner pages Material Cover Pages Coating Inner pages Coating 8 pages colour printing colour printing 128g copperplate paper 128g copperplate paper varnishing varnishing Binding & Folding Process Booklet type folding & 2 pcs stable biding Output lpi Tolerance Color Tolerance PART NUMBER 200 Lpi L*W:+1mm/-1mm MP-0000073406 Printing Colors PANTONE 2728 C PANTONE 715 c C:0,M:0,Y:0,K:100 C:75,M:0,Y:100,K:0 C:73,M:13,Y:9,K:0 C:0,M:100,Y:100,K:0 MP-000007332112.01.2021Initial ReleaseMBQIG, 4970, Generic, EN, Color, Single, R0, v0 Wi-Fi 6E Smart Mesh System User Manual Air 4980 / Air 4985 Wi-Fi 6E Smart Mesh System Status LED WPS Button 2.5 Gigabit WAN/LAN Ethernet Port Power On/OFF Button External Power Supply Gigabit LAN Ethernet Ports PORTS and BUTTONS Reset Button
* Ethernet (Internet) cable from your Internet Service Provider or modem should be plugged into WAN ethernet port of Air 4980 / Air 4985 device. 02
Please remove the protective plastic on the products before installation. INSTALLATION To install the Airties Wireless download please devices, Airties Vision application on your mobile device by scanning this QR code. Please follow the instructions in the mobile application to complete your setup. 03 TIPS FOR BEST PERFORMANCE Your device is designed to work indoors and under room temperature conditions only. Avoid placing the device to very cold, very hot, very humid or very dry locations inside your home. To change advanced settings on your device, you can access web UI with the credentials below by typing http://masternode.local in the address field of your browser and press enter to display the login window:
Username: admin Password: Admin123 Keep devices away from:
Potential sources of electrical interference. Equipment that may potentially cause interference include home security systems, microwaves and consumer electronic devices. Large metal surfaces and objects. Sources and areas of heat such as ovens and sun rooms as well as direct sun light. Please make sure to remove the protective plastic on the device before first use. Please use the device in upright position. The openings are provided for ventilation, do not block or cover openings. 04 RETURNING TO FACTORY SETTINGS To return the device to factory settings, press down on the reset button (in the small opening on the back shown above) for 5 seconds and release. A metal paperclip (with an extended tip) or strong toothpick are typically good choices for this task. When the reset process is triggered, the LED in the front will blink rapidly and the device will reboot to factory settings. PRODUCT NOTICES Operational modes:
2.4 GHz:
5 GHz:
6 GHz:
802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ax (HE20), 802.11ax (HE40) 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80), 802.11ac (VHT160), 802.11ax (HE20), 802.11ax (HE40), 802.11ax (HE80), 802.11ax (HE160) 802.11ax (HE20), 802.11ax (HE40), 802.11ax (HE80), 802.11ax (HE160) 05 TROUBLESHOOTING Condition LED Color LED Behavior Timing Power OFF OFF
Power ON, booting White Blinking Wireless network healthy Green Blinking 5O milliseconds OFF 5 seconds ON Device configured as single wireless access point Green Solid Unconfigured mesh device Blue Blinking 4 seconds OFF 4 seconds ON Weak connection to the wireless mesh network Red Solid No Internet Red Blinking Software upgrade Blue Blinking 1/2 second OFF 1/2 second ON 1/2 second OFF 1/2 second ON 06 Explanation Recommended Action(s) Device is turned off. Make sure the power button on the back is pressed and power supply unit is connected to the device. No action required. If the device was just powered on, please wait for at least 2 minutes for the device to boot up. LED is steady green with a short blink every 5 seconds. No action required. Device is connected to the router/
gateway with an ethernet cable and acts as a wireless access point. No other mesh devices are configured in the network. No action required, more mesh devices can be added to the wireless mesh network if needed. Device is not configured and connectedto the wireless mesh network. Configure the device using Airties Vision app. Your internet connection is down. Device is retrieving the latest software. Bring device closer to another device in the wireless mesh network. Please check WAN ethernet cable connection between your modem and Air 4980 / Air 4985 device. If the issue persists, contact your Internet Service Provider. Wait for the upgrade to complete. Device will automatically start with the latest software. 07 MP-00000XXXXX REV21012022 Regulatory Statements & Safety Instructions The following instructions apply to the "Product" which includes:
Product: Airties Connect 200 Model No: Air 4985 and its accessories (cables, power supply, etc.) Please read these guidelines carefully and keep the document for your reference. Product warranty is void if you do not follow the below guidelines
WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: The power plug is designed to act as a disconnect device. The indoor power outlet must be easily accessible. This Product is intended for indoor use only.
You must be careful when using the device near personal medical devices, such as pacemakers and hearing aids. All wireless products are sensitive to interference which may aect their performance. This device is not intended for use by young children. This device contains small parts which are a choking hazard. CE RF Exposure: In line with RF exposure guidelines, the device must be used at least 20cm away from the body. Failure to observe these instructions could result in RF exposure exceeding the relevant guidelines. The product should not be used in areas that present a risk of explosion or an explosive atmosphere. Such environments may include, but are not limited to, petrol stations, boats, storage facilities and transportation units for chemicals, and anywhere the air may contain chemicals or large quantities of particles such as grain, dust, or metal. Installation and Placement Use only approved accessories and power adapter. Do not connect with incompatible products or accessories. This product must not be installed or placed in a location subject to direct sunlight, direct heat or excessive moisture. This product must not be installed or used in areas that are not suciently ventilated or that build up excessive heat. Do not cover or block the ventilation slots of the device. Product Maintenance and Handling The only way to completely turn o the power is to unplug the product. Always unplug before any kind of cleaning or maintenance of the product. Clean with a damp cloth, avoid aerosol and liquid cleaners. Handle the product carefully to avoid damage. Do not attempt to disassemble and repair the product, its power adapter, or cables. Under the following conditions, your Product must be repaired by a qualied electrician:
This equipment is subject to certain restrictions, 5150 to 5350 MHz and 5945 to 6425 MHz frequency range is restricted to indoor use when it is used in the following countries:
Never push objects of any kind into this device through any openings other than the RESET hole as they may touch voltage points or short cut parts which could result in re, explosion, or electric shock and permanently damage the product or cause injury. Do not expose your device or its accessories to extreme temperatures, keep within the range of minimum 0 (32 F) and maximum 40 (104 F) degrees Celsius. If the power adapter or cable is damaged. If the product has been exposed to rain or other moisture. If the product does not operate as expected when following usage instructions. If the product has been dropped or is visibly damaged. You notice a distinct change in performance that indicates a need for maintenance. Hereby, Airties declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity (DoC) is available at the following internet address:
https://airties.com/declarations-of-conformity
(Please click on the model to view the relevant document) Belgium (BE), Bulgaria (BG), Czech (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), United Kingdom (Northern Ireland)
(UK(NI)), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), Liechtenstein (LI). Compliance with 2014/53/EU Radio Equipment Directive
(RED): In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of Airties wireless products for sale in the EU:
Frequency range (MHz) Channels used Max. Transmit Power (dBm/mW) 2400-2483.5 5150-5250 5250-5350 5470-5725 5945-6425 1-13 36-48 52-64 100-140 OFDM: 19,9dBm (97.7mW) CCK: 17,9dBm (61.7mW) 22,9dBm (195mW) 22,9dBm (195mW) with TPC 19,9dBm (97.7mW) without TPC 29,9dBm (977mW) with TPC 26,9dBm (490mW) without TPC 1-93 22.9dBm (195mW) TPC = Transmit Power Control, a mechanism that reduces transmitting power to minimize interference for nearby networks. ENERGY CONSUMPTION INFORMATION in standby mode
(According to the Guideline 2009 / 125 / EC of the European Parliament): 8W. REVISION TABLE Change Point Ref. PN. PN. Part Description Date Change Notes MP-00000xxxxx RSI, 4980, ClariFi, EN, Color, Single, R0, v0 26.10.2022 Initial Release Author MB NOT PRINTING !!!
There ARE INFORMATION ABOUT CUTTING LINE AND FOLDING MARKS. FRONT PAGE The product should not be used in areas that present a risk of explosion or an explosive atmosphere. Such environments may include, but are not limited to, petrol stations, boats, storage facilities and transportation units for chemicals, and anywhere the air may contain chemicals or large quantities of particles such as grain, dust, or metal. Installation and Placement Use only approved accessories and power adapter. Do not connect with incompatible products or accessories. This product must not be installed or placed in a location subject to direct sunlight, direct heat or excessive moisture. This product must not be installed or used in areas that are not sufficiently ventilated or that build up excessive heat. Do not cover or block the ventilation slots of the device. Product Maintenance and Handling The only way to completely turn off the power is to unplug the product. Always unplug before any kind of cleaning or maintenance of the product. Clean with a damp cloth, avoid aerosol and liquid cleaners. Handle the product carefully to avoid damage. Do not attempt to disassemble and repair the product, its power adapter, or cables. Under the following conditions, your Product must be repaired by a qualified electrician:
Never push objects of any kind into this device through any openings other than the RESET hole as they may touch voltage points or short cut parts which could result in fire, explosion, or electric shock and permanently damage the product or cause injury. Do not expose your device or its accessories to extreme temperatures, keep within the range of minimum 0 (32 F) and maximum 40 (104 F) degrees Celsius. If the power adapter or cable is damaged. If the product has been exposed to rain or other moisture. If the product does not operate as expected when following usage instructions. If the product has been dropped or is visibly damaged. You notice a distinct change in performance that indicates a need for maintenance. Hereby, Airties declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity (DoC) is available at the following internet address:
http://airties.com/declarations-of-conformity.html
(Please click on the model to view the relevant document) This equipment is subject to certain restrictions, 5150 to 5350 MHz frequency range is restricted to indoor use when it is used in the following countries:
Belgium (BE), Bulgaria (BG), Czech (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus
(CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria
(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia
(SI), Slovakia (SK), Finland (FI), Sweden (SE), United Kingdom (Northern Ireland) (UK(NI)), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), Liechtenstein (LI). Compliance with 2014/53/EU Radio Equipment Directive
(RED): In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of Airties wireless products for sale in the EU:
Frequency range (MHz) Channels used Max. Transmit Power (dBm/mW) 2400-2483.5 5150-5250 5250-5350 1-13 36-48 52-64 5470-5725 100-140 OFDM: 19,9dBm (97.7mW) CCK: 17,9dBm (61.7mW) 22,9dBm (195mW) 22,9dBm (195mW) with TPC 19,9dBm (97.7mW) without TPC 29,9dBm (977mW) with TPC 26,9dBm (490mW) without TPC TPC = Transmit Power Control, a mechanism that reduces transmitting power to minimize interference for nearby networks. ENERGY CONSUMPTION INFORMATION in standby mode
(According to the Guideline 2009 / 125 / EC of the European Parliament): 4.5 W Air 4985 / CLARIFI / EU_US_CA /
Regulatory Statements & Safety Instructions ( RSI )
(Printed Material Specification) Flat dimension Dimension after binding 320mm x 120mm 80mm x 30mm Pages One page /Double side Printing Color Page Material Pages Coating colour printing 80-100 gr writing paper No coating BACK PAGE Printing Technique Offset printing / 100% vegetal ink Binding & Folding Process Accordion type folding If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and devices Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult a dealer or an experienced radio/TV technician for assistance FCC Caution The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the users authority to operate the equipment. 2.4GHz operation of this product in the USA/CA is firmware limited to channels 1 through 11. This device is restricted for indoor use. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IC Statement This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence qui sont conformes au (x) RSS (s) exempts de licence dInnovation, Sciences et Dveloppement conomique Canada. Lopration est soumise aux deux conditions suivantes:
(1) Cet appareil ne doit pas provoquer dinterfrences.
(2) Cet appareil doit accepter toute interfrence, y compris les interfrences susceptibles de provoquer un fonctionnement indsirable de lappareil. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. For indoor use only. Pour une utilisation en intrieur uniquement. IMPORTANT NOTE IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 22cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 22cm de distance entre la source de rayonnement et votre corps. Open Source Software The Product contains Open Source Software. Detailed information on the applicable licenses and license terms can be found on the device's user interface. To obtain a copy of said source code. Please contact osrb@airties.com Additional safety, compliance, recycling and other important information regarding your device can be reached at www.airties.com/sustainability Third-Party Software or Firmware The use of software or firmware not supported/provided by Airties products may result in the equipment no longer being compliant with the regulatory requirements. 7 5 7 3 7 0 0 0 0 0
P M 1 2 0 2 1 1 5 2 V E R Output lpi Tolerance Color Tolerance PART NUMBER 200 Lpi L*W:+1mm/-1mm MP-0000074164 Regulatory Statements & Safety Instructions The following instructions apply to the "Product" which includes:
Model No: Air 4980, Air 4985 and its accessories (cables, power supply, etc.) Please read these guidelines carefully and keep the document for your reference. Product warranty is void if you do not follow the below guidelines WARNING: Do not use this product near water, for example, in a wet basement or near a swimming pool. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
WARNING: The power plug is designed to act as a disconnect device. The indoor power outlet must be easily accessible. This Product is intended for indoor use only.
You must be careful when using the device near personal medical devices, such as pacemakers and hearing aids. All wireless products are sensitive to interference which may affect their performance. This device is not intended for use by young children. This device contains small parts which are a choking hazard. RF Exposure: In line with RF exposure guidelines, the device must be used at least 20cm away from the body. Failure to observe these instructions could result in RF exposure exceeding the relevant guidelines. Recycling of electrical and electronic equipment Product Recycling from and differentiation This symbol indicates the obligation of separate collection of electrical and electronic equipment other waste. Hazardous substances contained in electrical and electronic equipment and their improper use may have adverse effects on the environment and human health. Once out of use, this product should be disposed of separately from regular household waste streams. Please follow your local and national guidelines for the responsible disposal of electronic waste when the products lifecycle is over. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. CUTTING LINE FOLDING MARKS Printing Colors Attention!
Safety instructions must be FSC compliant, must contain at least 70% of recyclable fibres. Ideally safety instructions must be recycled and recyclable. Safety instructions must be printed with a 100% vegetal ink. Pantone 2728C C:0, M:0, Y:0, K:100 Pantone 715C THIS PAGE NOT PRINTING!
THIS PAGE INFORMATION FOR THE PAGE FOLDING. Recycling of electrical and electronic equipment Product Recycling This symbol indicates the obligation of separate collection of electrical and electronic equipment and dierentiation from other waste. Hazardous substances contained in electrical and electronic equipment and their improper use may have adverse eects on the environment and human health. Once out of use, this product should be disposed of separately from regular household waste streams. Please follow your local and national guidelines for the responsible disposal of electronic waste when the products lifecycle is over. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, that may cause undesired including operation. interference This product has been tested and complies with the specications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and devices. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult a dealer or an experienced radio/TV technician for assistance. FCC Caution The grantee is not responsible for any changes or modications not expressly approved by the party responsible for compliance. Such modications could void the users authority to operate the equipment. 2.4 GHz operation of this product in the USA/CA is rmware limited to channels 1 through 11. The operation of this is prohibited on oil platforms, cars, trains, boats, and aircraft, except the device is permitted in large aircraft while ying above 10,000 feet. Operation of transmitters in the 5.915-7.125 GHz band is prohibited for control of or communication with unmanned aircraft systems. This device is restricted for indoor use. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 45 cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IC Statement contains licence-exempt transmitter(s)/
This device receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence qui sont conformes au (x) RSS (s) exempts de licence dInnovation, Sciences et Dveloppement conomique Canada. Lopration est soumise aux deux conditions suivantes:
(1) Cet appareil ne doit pas provoquer dinterfrences.
(2) Cet appareil doit accepter toute interfrence, y compris les interfrences susceptibles de provoquer un fonctionnement indsirable de lappareil. The device for operation in the band 51505250 MHz is only indoor use to reduce the potential for harmful for interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur an de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Operation on oil platforms, cars, trains, boats and aircraft shall be prohibited except for on large aircraft ying above 10,000 ft. Utilisation interdite bord de plateformes de forage ptrolier, de voitures, de trains, de bateaux et daronefs, sauf bord dun gros aronef volant plus de 10 000 pieds daltitude. For indoor use only. Pour une utilisation en intrieur uniquement. IMPORTANT NOTE IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 26 cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 26 cm de distance entre la source de rayonnement et votre corps. Open Source Software The Product contains Open Source Software. Detailed information on the applicable licenses and license terms can be found on the device's user interface. To obtain a copy of said source code. Please contact osrb@airties.com Additional safety, compliance, recycling and other important information regarding your device can be reached at www.airties.com/sustainability Third-Party Software or Firmware The use of software or rmware not supported/provided by Airties products may result in the equipment no longer being compliant with regulatory requirements. the x x x x x 0 0 0 0 0
P M 2 2 0 2 0 1 6 2 V E R