Model name:
Ajax Transmitter (9NA) Quick Start Guide Before using the device, we strongly recommend reviewing the User Manual on the website. ajax.systems/
support/devices/
transmitter Product name: Integration module Transmitter is a wireless module to integrate third-party wired detectors into the Ajax security system. Detector connection type NC/NO terminals (alarm/tamper) Processing mode Pulse or bistable Frequency range 905-926.5 MHz FHSS
(complies with part 15 of the FCC rules) Maximum RF output power 3.53 mW Radio signal range 5,200 ft (line-of-sight) Protection against dismounting Accelerometer Power supply Power output for wired detectors 3 x CR123A, 3 V batteries 3,3 V Operating temperature range From -13 to 122F Operating humidity Up to 75%
Dimesions Weight 3.94 1.54 x 0.87 2.61 oz Complete Set: 1. Transmitter; 2. Battery CR123A 3 pcs; 3. Instal-
lation kit; 4. Quick Start Guide FCC Regulatory Compliance ISED Regulatory Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develop-
ment Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interfer-
ence that may cause undesired operation of the device. To maintain compliance with ISEDs RF Exposure guidelines, this equipment should be installed and operated with a mini-
mum distance of 20 cm between the radiator your body: Use only the supplied antenna. licence contenu dans Lmetteur/rcepteur exempt de le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appa-
reils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Pour maintenir la conformit avec les directives dexposition aux RF dISDE, cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps :
Utilisez uniquement lantenne fournie. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES AC-
CORDING TO THE INSTRUCTIONS. Warranty: Warranty for Ajax devices is valid for two years after the purchase date and does not apply to the supplied battery. If the device does not work correctly, you should first contact the support servicein half of the cases, technical issues can be solved remotely!
The full text of the warranty is available on the website:
ajax.systems/warranty User Agreement: ajax.systems/end-user-agreement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for com-
pliance could void the users authority to operate the equipment. Technical support: [email protected] Manufacturer: AS Manufacturing LLC. Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine. www.ajax.systems this equipment should be installed and operated with a minimum dis-
tance of 20 cm between the radiator your body: Use only the supplied antenna. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.