Model name:
Ajax Hub 2 Plus
(9NA/AFA) Quick Start Guide Before using the device, we strongly recommend reviewing the User Manual on the website. ajax.systems/
support/
devices/
hub-2-plus Product name: Security control panel Hub 2 Plus intelligent control panel is a key element of the Ajax security system. The device monitors the operation of all Ajax detectors and immediately sends an alarm signal to a monitoring station and users. Power supply 110 - 240 V Accumulator unit Li-Ion 3 Ah (up to 15 hours of autonomous operation) Anti-tampering switch Yes Frequency range 905-926,5 MHz FHSS
(complies with part 15 of the FCC rules) Maximum RF output power 21.04 mW Radio signal range Up to 6,500 ft (line-of-sight) Communication channels WCDMA (B2/B4/B5 bands), LTE (B2/B4/B12 bands), Wi-Fi (802.11 b/g/n), Ethernet Operating temperature range From 14 to 104 F Operating humidity Up to 75%
Dimesions Weight 6.4 6.4 x 1.4 12.9 oz ISED Regulatory Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Cana-
das licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appa-
reil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de li-
cence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN IN-
CORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. RF Exposure Compliance This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the ra-
diator and your body. Cet quipement est conforme aux limites dexposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Cet quipe-
ment doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Warranty: Warranty for Ajax devices is valid for two years after the pur-
chase date and does not apply to the backup rechargable battery. If the device does not work correctly, you should first contact the support servicein half of the cases, technical issues can be solved remotely!
The full text of the warranty is available on the website:
ajax.systems/warranty User Agreement: ajax.systems/end-user-agreement 1LTE-FDD B2 does not support Rx-diversity Technical support: support@ajax.systems Complete Set: 1. Hub 2 Plus; 2. SmartBracket mounting panel; 3. Power supply cable; 4. Ethernet cable; 5. Installation kit; 6. Quick Start Guide Manufacturer: AS Manufacturing LLC. Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine. www.ajax.systems FCC Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsi-
ble for compliance could void the users authority to operate the equip-
ment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.