*504471*
Instruction Manual for the Akrapovi Sound Kit Sound Remote Controller and Akrapovi Car Sound Kit App Manual FOR CARS Ver 1.0 / April 2015 Akrapovi Sound Kit CONGRATULATIONS -
Congratulations on purchasing the Akrapovi Sound Kit. The Akrapovi Sound Kit is a product of Akrapovi d.d., Malo Hudo 8a, 1295 Ivanna Gorica, Slovenia (Akrapovi). Please read this entire installation manual carefully prior to installing and using the Akrapovi Sound Kit. The Akrapovi Sound Kit should be used only with original Akrapovi exhaust systems. The Akrapovi Sound Kit may be operated using the enclosed Sound Remote Controller or with the Akrapovi Car Sound Kit App. 3 / 36 The Akrapovi Sound Kit is intended for use only in cars. Use or adaption of the Sound Kit for other types of vehicles may result in non-working products. For more information on the Akrapovi Sound Kit and/or Akrapovi exhaust systems, see the official Akrapovi website at:
http://www.akrapovic.com Please entrust the installation of the Akrapovi Sound Kit to a trained professional skilled in car electronics and knowledge of exhaust system installation and performance. The instructions provided in this manual should be followed to ensure proper installation and safe use of the Akrapovi Sound Kit. Akrapovi and/or its partners shall not be held liable for any damage or personal injury (including direct, indirect, or consequential damage) sustained as a result of improper installation of the Akrapovi Sound Kit, use contrary to the instructions and warnings contained herein, or use with exhaust systems other than Akrapovi
(original) exhaust systems or vehicles other than those specified on the particular Akrapovi Sound Kit box and/or the official Akrapovi website. If you have any questions regarding the installation and/or proper use of the Akrapovi Sound Kit or these instructions, contact your local authorized Akrapovi partner. COPYRIGHTS AND OTHER RIGHTS NOTICE The Akrapovi trademark, including corporate logos and emblems, are subject to copyright as well as trademark rights of Akrapovi, its licensors, or third persons authorizing Akrapovi to use them. Any reproduction, technical or other manipulation, translation, or other use of the copyright and/or trademark rights contained herein is prohibited without the explicit prior written con-
sent of Akrapovi. The same especially applies to the entire contents of this manual and/
or any of its parts, including but not limited to technical specifications, instructions, graphs, photographs, and so on included in this manual. The photographs and other illustrations in this manual are symbolic and are intended to help represent individual steps for proper installation and use, as well as for a general overview. The actual component parts of the Akrapovi Sound Kit may not entirely correspond to the photographs and other illustrations. Akrapovi d.d., 2015, All rights reserved. 4 / 36 5 / 36 CONTENTS 1 1 1 Sound Remote Controller (IP54)*
2 1 key ring 3 1 Sound Remote Controller holder 4 1 instruction manual with the PIN pairing code
(printed on the back cover of this manual)
*Battery included. 6 / 36 3 2 PRODUCT OVERVIEW The Akrapovi Sound Kit enables owners of selected Akrapovi car exhausts to control the sound of the system from the cockpit of their vehicle. Using Akrapovi technology, the driver can easily switch between the quiet mode and a sportier sound. With the use of a receiver to drive the actuators that open or close the valves at the end of the exhaust system, the driver can use the Sound Remote Controller or the Akrapovi Car Sound Kit App to regulate the valves. As an alternative to the Sound Remote Controller, Akrapovi has created a smartphone app (for iOS and Android) to provide an even better connection to the receiver. The operation of the Akrapovi Sound Kit using the Akrapovi Car Sound Kit App requires the PIN pairing code, which is permanently written on the sound receiver and is printed on the back cover of this manual. KEEP THIS MANUAL FOR FURTHER REFERENCE because the PIN pairing code is unique to a particular 7 / 36 Akrapovi Sound Kit and cannot be retrieved if it is lost or if its inscription on the sound receiver becomes unreadable or inaccessible. It is possible to use the Akrapovi Sound Kit with more than one Sound Remote Controller (not at the same time). Additional Sound Remote Controllers can be purchased separately; contact your local authorized Akrapovi partner for more information. SAFETY WARNINGS Road Safety To avoid traffic accidents, use the Akrapovi Sound Kit system responsibly and safely, and always obey local traffic rules. Use of the Sound Remote Controller and the Akrapovi Car Sound Kit App while driving may cause distraction, so avoid operating the Akrapovi Sound Kit system in circumstances that prevent you from focusing on safe driving. Note that using the Akrapovi Sound Kit system (changing between the open and closed modes) influences the engine response and torque generated, causing certain changes in the vehicle response;
therefore do not use the Akrapovi Sound Kit system in poor weather conditions. When using the Akrapovi Sound Kit, always consider the road and traffic conditions. Use of the Sound Remote Controller and/or Akrapovi Car Sound Kit App by persons other than the driver (especially 8 / 36 9 / 36 children) and consequently unexpected changes between the open and closed modes in uncontrolled circumstances may take drivers by surprise, endangering the safety of the passengers in the vehicle and/or other road users or causing interference-related malfunctions. Refer to the Interference section below. Interference All wireless devices are susceptible to or may cause interference. Do not use the Sound Remote Controller in environments where such interference might cause malfunction of machines or devices and/
or endanger the lives of others (e.g., in airplanes, in hospitals, or near medical equipment or implanted medical devices) as well as in places where the use of wireless devices is prohibited or restricted. Child Safety The Sound Remote Controller should be kept out of reach of children because it contains small parts. The Sound Remote Controller and/
or Akrapovi Car Sound Kit App should not be operated by children. Refer to the Road Safety section above. OPERATING THE AKRAPOVI SOUND KIT WITH THE SOUND REMOTE CONTROLLER PAIRING PROCESS with a New Sound Remote Controller For the Sound Remote Controller to work, it must be paired with the sound receiver. The (original) Akrapovi exhaust system with the valves and sound receiver must first be installed. Refer to the Akrapovi exhaust system and the Akrapovi Sound Kit Installation Manual. To pair the Sound Remote Controller with the sound receiver, press and hold the button on the Sound Remote Controller until the red LED starts flashing. Switch the car ON to supply the sound receiver. The pairing process will occur automatically within ten seconds. If the pairing process is completed successfully, the LED (white or red) on the Sound Remote Controller will turn on for fifteen seconds. 10 / 36 11 / 36 regulation and permanently open valves. The availability of closed valves / automatic regulation mode may vary depending on the type of vehicle. By pressing the button, the LED on the Sound Remote Controller is activated. One button two different modes. If the pairing is unsuccessful, the LED light on the Sound Remote Controller will flash white three times and switch to sleep mode. If this happens, you should repeat the complete pairing process. After the pairing process is completed, the Sound Remote Controller can only be used with the corresponding installed and paired receiver. The pairing process must be completed before the first use of the Akrapovi Sound Kit. HOW TO USE the Sound Remote Controller For the Sound Remote Controller to work, it must be used in the vehicle or within a twenty-meter range. Press the Sound Remote Controller button to change the valve position, switching between permanently closed valves / automatic 12 / 36 13 / 36 The LED colors change when the valve position (the modes of the Akrapovi Sound Kit) is changed:
White closed valves Blinking White no communication with the receiver; refer to the troubleshooting section Red open valves Blinking Red communication with the receiver is working but there is an issue with the valve system; see the troubleshooting section No color: sleep mode Orange: battery level too low to operate or detected default on the battery If the button is not pressed for a full fifteen seconds, the Sound Remote Controller enters sleep mode until the next time it is pressed. Note that the valves are always in default closed position when the engine is started. If the Sound Remote Controller stops operating during driving (e.g., the battery runs out, or the Sound Remote Controller is damaged or is not functioning due to some other technical reason), switching between the modes is not possible and the valves remain in the last mode activated until the vehicles engine is switched off. At the next engine start, the default mode
(closed) is applied. The Sound Remote Controller will not function when the Akrapovi Car Sound Kit App is connected. 14 / 36 15 / 36 KEY RING AND SOUND REMOTE CONTROLLER HANGER MOUNTING INSTRUCTIONS 1. Adding the Key Ring to the Sound Remote Controller Simultaneously press the Sound Remote Controller side buttons and insert the key ring support, as shown in Figures 1 and 2. 2. Mounting and Using the Sound Remote Controller Hanger Peel off the protective strip (Figure 3), and correctly orient and stick the Sound Remote Controller together on the hanger in the desired position (Figure 4). Figure 1 Figure 2 Figure 3 Figure 4 16 / 36 17 / 36 The Sound Remote Controller can be removed from its hanger by pressing the side buttons simultaneously (Figure 5). NEVER use rechargeable coin cell batteries or other battery types Risk of explosion if battery is replaced by an incorrect type. Figure 5 3. Battery Replacement for the Sound Remote Controller 3.1 Unscrew the housing screws and open the Sound Remote Controller housing. Carefully remove the battery by offsetting the marked battery holder pin (Figures 6 and 7). Tool: Use a small PH000 screwdriver NOTE: Make sure to insert the new battery correctly! Check the battery polarity (type: Lithium CR2032 3V). Use ONLY disposable brand-named CR2032 3V lithium coin cell batteries in the Sound Remote Controller. Figure 6 Figure 7 3.2 After inserting the new battery, carefully snap the housing back together, aligning the side buttons as indicated, and close the housing. Tighten the screws as indicated (Figure 8). Figure 8 18 / 36 19 / 36 OPERATING THE AKRAPOVI SOUND KIT WITH THE AKRAPOVI CAR SOUND KIT APP Important notes This Akrapovi Sound Kit only works with the Akrapovi Car Sound Kit App. Check the name of the app carefully because the Akrapovi Sound Kit system will not function if the incorrect app is installed. The Akrapovi Car Sound Kit App is adapted for use on smartphones only and it is not functional on other mobile devices. The Sound Remote Controller will not function when the Akrapovi Car Sound Kit App is connected. Turn off the app if you wish to use the Sound Remote Controller instead. The Akrapovi Car Sound Kit App can be paired with different Akrapovi Sound Kits for cars. Installing the Akrapovi Car Sound Kit App iOS The Akrapovi Car Sound Kit App can be installed on devices listed in the app installer.
> Use the barcode scanner to open and install the Akrapovi Car Sound Kit App. The app can be installed from the App Store. Android The Akrapovi Car Sound Kit App can be installed on devices listed in the app installer (smartphones with embedded Bluetooth 4.0 Low Energy and Android 4.4.2 and 5.1; 5.0 excluded) QR KODA
> Use the barcode scanner to open and install the Akrapovi Car Sound Kit App. The app can be installed from the Play Store. 20 / 36 21 / 36 2. Opening the Akrapovi Sound Kit Smartphone App for the First Time After the Akrapovi Car Sound Kit App is installed on your smart-
phone, switch ON the vehicle and open the Akrapovi Car Sound Kit App on your device. The first time the app is opened, a message will appear and ask if an Akrapovi Sound Kit is installed in the car (Figure 9). 3. Pairing the Akrapovi Sound Kit with the Smartphone App Before using the Akrapovi Car Sound Kit App, it must be paired with the Akrapovi Sound Kit receiver. To pair the Akrapovi Car Sound Kit App with the receiver, touch PAIR NEW (Figure 10). The Akrapovi Car Sound Kit App will search for Bluetooth devices. The sound receiver discovery name is SoundKit Pressing on it will launch the pairing request Enter the PIN paring code as found on the back cover of this manual The pairing process in concluded by entering and saving your car name for further use. 4. How to Use the Akrapovi Sound Kit Smartphone App Touch your car name in the app. A screen with the Sound Remote Controller will appear. Touch the Akrapovi logo in the middle of Figure 9 Figure 10 22 / 36 23 / 36 the screen (Figure 11) to switch between the two different positions of the valves: permanently closed valves / automatic regulation and permanently open valves. This (i.e., closed valves /
automatic regulation) may vary depending on the type of the vehicle. Note that the valves are always in default closed position when the engine is started. If the Bluetooth connection is lost/disconnected or the Akrapovi Car Sound Kit App is closed, the valves remain in the last mode activated until the vehicles engine is switched off. At the next engine start, the default mode
(closed) is applied. By touching the back button, the app disconnects from the sound re-
ceiver. The Sound Remote Control-
ler can now be used. Figure 11 24 / 36 TROUBLESHOOTING If youre having trouble using the Sound Remote Controller and/
or Akrapovi Car Sound Kit App, first check the following to see if the Sound Remote Controller and/or Akrapovi Car Sound Kit App is paired with the sound receiver. If yes, refer to the list of possible solutions in the table below. If youre unable to resolve the problem based on the suggestions below, contact your local authorized Akrapovi partner. Sound Remote Controller PROBLEM POSSIBLE CAUSE SOLUTION No LED on the Sound Remote Controller Battery level too low to function Sound Remote Controller not working properly Replace the battery. Remove the battery, press the Sound Remote Control-
ler button for one second, and put the battery back in. 25 / 36 Sound Remote Controller PROBLEM Orange LED on the Sound Remote Controller White LED blinking on the Sound Remote Controller POSSIBLE CAUSE Low battery level or issue with the battery SOLUTION Replace the battery. No communication with the receiver Check if the vehicle is switched ON. Make sure you are within a range of twenty meters from your vehicle. Check the receiver: the green LED on the receiver must be ON when pressing the Sound Remote Control-
ler, meaning communica-
tion is enabled. Red LED blinking on the Sound Remote Controller There is communication with the receiver but there is some issue with the valve system Switch off the car. Wait one minute and switch on the car. 26 / 36 Smartphone App PROBLEM Issues related to connecting or pairing with the receiver POSSIBLE CAUSE Not able to discover or connect to the receiver SOLUTION Check if the app is adapted for use with your device:
refer to the list of devices in the app installer. Check if the vehicle is switched ON. Not able to pair with the receiver Check the PIN pairing code entered. Smartphone app not working properly Not able to connect with the receiver Check if the vehicle is switched ON. Restart the app. If the prob-
lem persists, restart your smartphone. Go to the smartphones Blue-
tooth settings: press on forget device. Repeat the procedure described under Opening the Akrapovi Car Sound Kit App for the First Time. 27 / 36 DECLARATION OF CONFORMITY COMPANY Akrapovi ADDRESS: Malo Hudo 8a, 1295 Ivanna Gorica, Slovenia declares that the following products:
PRODUCT NAME: Sound Kit TRADE NAME: Akrapovi TYPE OR MODEL: P-HF841 is in conformity with the requirements of the following Directives of the European Union: Regulation UN/ECE-R10 rev5 E1 10 R-057586 FCC NOTICE This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 28 / 36 29 / 36 Consult the dealer or an experienced radio technician for help. Sound Remote Controller: IC: 20099-ASK01 Sound Receiver: IC: 20099-ASR01 Sound Remote Controller: FCC-ID: 2AECJASK01 Sound Receiver: FCC-ID: 2AECJASR01 Industry Canada compliance statement This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. European Union Directives conformance Statement Akrapovi d.d. hereby declares that this Akrapovi Sound Kit P-HF481 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.akrapovic.com/docs/SoundKitCertification.pdf. Caring for the Environment by Recycling Please dispose of any materials in accordance with local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated, but disposed of in accordance with local regulations concerning battery disposal. 30 / 36 31 / 36 GENERAL WARNING Because of the worldwide distribution of Akrapovi d.d. products, neither Akrapovi d.d. nor any of its subsidiaries make any representation that the products comply with the air and/or noise emissions laws, or labeling laws, of any jurisdiction. The purchasers are entirely responsible for informing themselves of the applicable laws where the products are to be used and for complying with those laws. WARNING / USA:
Various US states and the US federal government have individual laws regulating the use of aftermarket exhaust parts and systems, especially as those parts and systems modify, remove, or replace original equipment catalysts. Consult the appropriate laws in your area before installing any aftermarket part or system on your vehicle to ensure compliance with all applicable laws. Neither Akrapovic d.d. nor any of its subsidiaries nor the sellers of the parts or systems make any representation that any of their parts or systems comply with any such laws. WARNING / California:
California laws prohibit the use of any aftermarket exhaust part or system that modifies, removes, or replaces original equipment catalysts unless the California Air Resources Board has issued an executive order regarding such part or system or unless the part or system is exempted by being used only on racing vehicles on closed courses. Neither Akrapovic d.d. nor any of its subsidiaries make any representation that any of their parts or systems has received such an executive order or that any of their parts or systems conform with the racing vehicles exemption. The purchasers are entirely responsible for informing themselves of applicable California laws and for complying with those laws. 32 / 36 33 / 36 Absolute control with a simple push of the button. 34 / 36 Pin pairing code:
Keep this code for future reference. Refer to the product overview section for important information regarding the pin pairing code. www.akrapovic.com