It's important to read this instruction prior to using your new product for the first time. CT9223W97 Equipment tested for compliance as a complete unit This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3(B) / NMB-3(B) Increase the separation between the equipment and receiver. Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box 1214, Lockport, NY, 14095, Tel: 716-240-0902) could void the users authority to operate the equipment. 1 This device complies with Industry Canada License-exempt RSS Standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the mains plug from mains completely, the AC adapter should be disconnected from the mains socket outlet completely. The socket-outlet shall be installed near the equipment and shall be easily accessible. IMPORTANT SAFETY INSTRUCTIONS Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments / accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. 2 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ADDITIONAL SAFETY INFORMATION The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. Do not place lighted candles, cigarettes, cigars, etc. on the product. Care should be taken so that objects do not fall into the product. Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components. To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not play your headset at high volume. Hearing experts warn against extended high-volume play. 3 Getting to know your tablet HDMI port Front camera USB port Microphone Headphone jack Power Reset Rear camera DC jack MicroSD card slot Micro-USB port Volume +/-
4 Turning on your tablet for the first time Before turning on your tablet for the first time, connect the supplied AC adapter into the tablet's DC 5V port and to a nearby wall outlet to activate the battery. You may also charge the tablet with the micro USB port. Charging your tablet IMPORTANT! Please Read. We recommend fully charging your tablet before using it for the first time. For optimal operation, please connect the provided AC adapter to your tablet once the battery reaches 20% charge. NOTE You cannot switch on the unit if the battery level is less than 5%. Please charge the unit for more than 20 minutes then switch on the unit. 5 Turning on your tablet Be sure your home Wi-Fi network is turned on and connected to the internet. Press and hold the Power button 4~5 seconds to turn on the unit. Select the language and region, then tap follow the onscreen instructions to setup the tablet. and 6 Tablet docking/undocking Connector Trackpad NOTE The keyboard connects to the tablet via the Magnalink connector. When the connection is successful, the tablet will automatically adjust its settings to use the keyboard. 7 Turning on the tablet screen from standby mode Press the Power to turn on the tablet screen. button Touch and drag to unlock. Sleep / Standby mode Press the Power button to turn off the tablet screen. 8 Power off your tablet Press and hold the Power button until Power off appears and tap it. The tablet will be completely powered off. Specification Power: DC IN 5V (operate with AC adapter) 9 Copyright and trademark notices The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG Inc. Other trademarks and trade names are those of their respective owners. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks, registered trademarks or service marks of HDMI Licensing, LLC in the United States and/or other countries. About HDMI High-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed high definition video and digital multichannel audio. It delivers high quality picture and sound quality. HDMI is fully backward compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI products without HDCP (High bandwidth Digital Content Protection) will result in no Video or Audio output. All other trademark appearing herein are the property of their respective owners. Specifications subject to change without notice. 10