FCC ID: 2AKXF-ALB080 Alert Labs Sub 1GHz Radio Module

Alert Labs Inc. Sub 1GHz Radio Module Model Number: ALRM001 User Manual Overview The Alert Labs Inc. ALRM001 module is based on the Murata CMWX1ZZABZ Sub G Module with the addition of a helical antenna printed on the carrier PCB. The Alert Labs ALRM001 module itself is identical to the Murata CMWX1ZZABZ, and as a result, has all the same electrical and mechanical details specified in the CMWX1ZZABZ datasheet. The Alert Labs ALRM001 is intended for use only in Alert Labs Inc. products. Users of Alert Labs products do not have access to the module firmware meaning that a user cannot inadvertently change the radio operation so as to invalidate regulatory approvals. Label The labelling area of the ALRM001 is on the top surface of the module can whose dimensions are 12.1 mm x 11.1 mm, as shown in Figure 1. It is not possible to print a label such that the regulatory rules for legibility, font size, and formatting the complete regulatory identifiers on one line are all simultaneously met. As a result, the Alert Labs module model number, FCC, and IC identifiers are included in this manual. Further, when the Alert Labs ALRM001 module is integrated into a product, the product literature must indicate the module model number and regulatory identifiers. 2-132 Queen St. S., Kitchener, ON N2G 1V9 DOC-000025-001 User Manual www.alertlabs.com Page 1 of 5 Figure 1: Potential labelling area FCC and IC Identifiers Model Number: ALRM001 FCC ID: 2AKXF-ALB080 IC: 22365-ALB080 Module Integration Integration of the Alert Labs ALRM001 module into an Alert Labs product will make the module inaccessible to a user. This will avoid confusion regarding the regulatory identifiers of the module. Alert Labs products made available for sale in Canada and the USA must themselves be labelled and must use the following text:

Contains FCC ID: 2AKXF-ALB080, IC: 22365-ALB080 Further, the following regulatory warning statements must be included in a prominent location in the Alert Labs product literature. For example, in an insert in the product package or in the product user manual:

FCC COMPLIANCE NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can 2-132 Queen St. S., Kitchener, ON N2G 1V9 DOC-000025-001 User Manual www.alertlabs.com Page 2 of 5 12.1mm11.1mm radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Cet quipement a t test et dclar conforme aux limites pour les appareils numriques de classe B, selon la section 15 des rglements de la FCC. Ces limites sont destines assurer une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement produit, utilise et peut mettre de lnergie radio lectrique et, sil nest pas install et utilis conformment aux prsentes instructions, peut causer des interfrences nuisibles aux communications radio. Il nexiste toutefois aucune garantie que de telles interfrences ne se produiront pas dans une installation particulire. Si cet quipement produit des interfrences nuisibles la rception dmissions de radio ou de tlvision, ce qui peut tre tabli en mettant lappareil sous, puis hors tension, il est recommand lutilisateur dessayer de corriger le problme en prenant lune ou plusieurs des mesures suivantes:

Rorienter ou dplacer lantenne rceptrice. Augmenter la distance sparant lquipement du rcepteur. Brancher lquipement sur un circuit lectrique diffrent de celui du rcepteur. Consulter le distributeur ou un technicien radio et tlvision. Cet appareil est conforme la Section 15 des rglementations de la FCC. Son fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer de brouillage prjudiciable, et

(2) Cet appareil doit accepter tout brouillage subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Tout changement ou modification nayant pas fait lobjet dune autorisation expresse de la partie responsable de la conformit peut entraner la perte du droit dutilisation de cet quipement. 2-132 Queen St. S., Kitchener, ON N2G 1V9 DOC-000025-001 User Manual www.alertlabs.com Page 3 of 5 IC COMPLIANCE NOTICE This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the folowing two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. RF EXPOSURE COMPLIANCE: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm during normal operation. CONFORMIT AUX NORMES DEXPOSITION AUX RF: Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. Antenna The Alert Labs ALRM001 can use an antenna described in the Murata CMWX1ZZABZ and a PCB printed helical antenna. The PCB printed helical antenna has the dimensions specified in Texas Instruments Design Note DN038 (doc # SWRA416), page 3. The performance of this antenna in the 902 to 928MHz band is specified on page 18 of the design note. Notably:

Peak Gain: 0.01dBi RF Circuit The RF connection from the ALRM001 to the antenna is shown in Figure 2. The helical antenna is not a 50 Ohm antenna so a matching network is required. Components L1, C1, and C2 will be populated, as required, with values that optimize the match to 50 Ohms. The matching will be done on an Alert Labs product basis and will remain the same for all instances of a product. 2-132 Queen St. S., Kitchener, ON N2G 1V9 DOC-000025-001 User Manual www.alertlabs.com Page 4 of 5 Figure 2: RF path to antenna 2-132 Queen St. S., Kitchener, ON N2G 1V9 DOC-000025-001 User Manual www.alertlabs.com Page 5 of 5 Alert Labs ALRM001L1C1C2ANT50 Ohm Transmission Line

Alert Labs Inc. Sub 1GHz Radio Module Model Number: ALRM001 Original Equipment Model:

FCC ID:

IC:

CMWX1ZZABZ VPYCMABZ 772C-CMABZ Alert Labs Inc. Equipment Model:

FCC ID:

IC:

ALRM001 2AKXF-ALB080 22365-ALB080 Overview The Alert Labs Inc. ALRM001 module is based on the Murata CMWX1ZZABZ Sub G Module. The Alert Labs ALRM001 module itself is identical to the Murata CMWX1ZZABZ, and as a result, has all the same electrical and mechanical details specified in the CMWX1ZZABZ datasheet. The Alert Labs ALRM001 is intended for use only in Alert Labs Inc. products. Users of Alert Labs products do not have access to the module firmware meaning that a user cannot inadvertently change the radio operation so as to invalidate regulatory approvals. Labelling The labelling area of the ALRM001 is on the top surface of the module EMI can, whose dimensions are 12.1 mm x 11.1 mm, as shown in Figure 1. It is not possible to print a label such that the regulatory rules for legibility, font size, and formatting the complete regulatory identifiers on one line are all simultaneously met. As a result, the Alert Labs module model number, FCC, and IC identifiers are included in this product brief as indicated above. 2-132 Queen St. S., Kitchener, ON N2G 1V9 DOC-000026-001 - Labelling www.alertlabs.com Page 1 of 2 Figure 1: Potential labelling area The Alert Labs ALRM001 is intended for use only in Alert Labs products as mentioned in the overview section. Alert Labs Inc. owns its own PCB assembly equipment meaning that all raw materials are assembled into Alert Labs products in-house. As a result, the Alert Labs ALRM001 module will not be repackaged for shipment to any other facility. Alert Labs products contain no user-serviceable parts, meaning that the Alert Labs ALRM001 module will not be visible to a user after final assembly. 2-132 Queen St. S., Kitchener, ON N2G 1V9 DOC-000026-001 - Labelling www.alertlabs.com Page 2 of 2 12.1mm11.1mm

Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent FCC On our behalf, I appoint Andrey Adelberg of Nemko Canada Inc. at 303 River Road Ottawa, Ontario, Canada K1V 1H2, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-

Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides Alert Labs Inc., 132 Queen Street South, Unit #2, Kitchener, ON N2G 1V9, Canada Dated this 5 Day of January 20 22 Agency agreement expiration date:

5 January 2023 By:

Charlie Harland Signature Printed Title:

VP of Engineering On behalf of:

Alert Labs Inc. Telephone:

519-279-6786 x721 2-132 Queen St. S., Kitchener, ON N2G 1V9 www.alertlabs.com

POP Number:

POP Name:

POP Revision:

Approval Date:

POP-000055-901 Stand Alone Murata Radio A 23-Sep-21 Qty Value Parts MFG_PN Package PART_TYPE POP MAX_HEIGHT Description ALERTLABS_PN PCB-000042-901 SOM-000014-001 Module LoRa 868-915MHz with STM32L082 CAP-000001-001 CAP-000010-001 CAP-000031-001 CAP-000033-001 CAP-000035-001 CAP-000051-001 CON-000106-001 CON-000113-001 DIO-000014-001 FIL-000008-001 IND-000026-001 LED-000005-001 RES-000001-001 RES-000003-001 RES-000041-001 RES-000042-001 SWC-000003-001 CAP CER 100NF 10% 16V X7R M1005 CAP CER 1UF 10% 16V X7R M2012 CAP AL 680UF 20% 16V D1030L1050 CAP CER 22UF 20% 6V3 X5R M2012 CAP CER 1UF 10% 6.3V X7R M1005 CAP CER 6.8PF Tolerance-0.1pF 50V C0G M1005 CONN HDR 1x4 Keyed Shroud 2mm Top Entry SUCTION CAP SMD ALT-CON-000106-002 CONN Banana Jack Standard Thru-hole H-2p36mm L-8p9mm TVS UNI 3V3-VRWM 4V8-VBR 9V0-VC SOD923 Ferrite Bead 1000R@100MHz 450mA M1608 IND WW RF 2.2nH Tolerance-0.1nH 2530mA 22mOhm 15.5GHz M1005 LED RGB Common Anode Top-Fire SMD M1616 RES 0R OHM JUMPER THICK FILM SMD M1005 RES 10K0 OHM 1% THICK FILM SMD M1005 RES 255R OHM 1% THICK FILM SMD M1005 RES 470R OHM 1% THICK FILM SMD M1005 SWITCH MICRO SPST NO 32VDC 50MA H-2.5mm F-4N GND-TAB TOP-ACTUATED SMD 1 1 ALRM001 5 100nF 2 1.0uF 1 680uF 3 22uF 2 1.0uF 1 6.8pF 1 B4B-PH-SM4-TBT(LF)(SN) 2 575-8 4 ESD9L3.3ST5G 2 1000R@100MHz 1 2.2nH 1 LTST-C19HE1WT 2 0R 5 10K0 2 255R 1 470R 1 KMR442GLFS U1 C4, C8, C11, C12, C13 C1, C2 C3 C5, C6, C7 C9, C10 C14 J4 J1, J2 D2, D3, D4, D5 FIL1, FIL2 L1 D1 R8, R9 R4, R5, R6, R11, R12 R2, R3 R1 S1 MFG PCBWay Alert Labs muRata muRata Wurth Elektronik muRata muRata muRata JST Sales Keystone Electronics ON Semiconductor muRata muRata Lite-ON Inc Yageo Yageo Yageo Yageo C&K ALRM001 GRM155R71C104KA88 GRM21BR71C105KA01 865060357010 GRM21BR60J226ME39 GRM155R70J105KA12 GJM1555C1H6R8BB01#

B4B-PH-SM4-TBT(LF)(SN) 575-8 ESD9L3.3ST5G BLM18AG102SN1 LQW15AN2N2B80#

LTST-C19HE1WT RC0402JR-070RL RC0402FR-0710KL RC0402FR-07255RL RC0402FR-07470RL KMR442GLFS LGA57S080P2X2_1250X1160X176 CAPC1005X055N_EIA0402 CAPC2012X135N_EIA0805 CAPAE1030X1050N CAPC2012X135_EIA0805 CAPC1005X055N_EIA0402 CAPC1005X055N_EIA0402 CONN_JST_B4B-PH-SM4-TB CONN_KEYSTONE_575-X SODFL1006X04_UNI-SOD923-2N BEADC1608X045N_EIA0603 INDC1005X035N_EIA0402 LEDC160X160X035-4 RESC1005X035N_EIA0402 RESC1005X035N_EIA0402 RESC1005X035N_EIA0402 RESC1005X035N_EIA0402 SW_CK-COMPONENTS_KMR_GROUND SMD SMD SMD SMD SMD SMD SMD SMD Thru-Hole SMD SMD SMD SMD SMD SMD SMD SMD yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes 1.76mm 0.55mm 1.35mm 10.5mm 1.4mm 0.55mm 0.55mm 6.6mm 2.36mm 0.4mm 0.95mm 0.6mm 0.35mm 0.4mm 0.4mm 0.4mm 0.4mm 2.5mm