FCC ID: 2AVUGAP4220 Wireless LAN Access Point

Quick Start Guide AP4220 Wireless Access Point Package Contents 1 2 3 4 1. AP4220 access point 2. One mounting bracket 3. One pack of screws 4. Documentation Quick Start Guide (this document), Certificate and Warranty card Warning: For indoor use only. The access point and all connected cables are not suitable for outdoor use. Mode 1: The hole on the back of the access point is threaded into the cable tie, and secured to the water pipe at the top. Mode 2: First insert the mounting bracket into the AP then insert the 1 Install the AP a. Install it on the Wall at the top position. d. Install it on the Ceiling Bracket 1. Fix two screws on the wall and 110 mm apart. 2. Slide the APS wall mounting slots down onto the screws so that the unit is secure. b. Install it on the Ceiling T-Bar 1. Rotate the bracket onto the T-bar of the ceiling. 2. Push the AP toward the bracket until it snaps into place. c. Install it with Cable Ties (with or without bracket) 2 1. Use the included screws to attach the mounting bracket to the wall. 2. Push the AP toward the bracket until it snaps into place. 2 Connect Cables 1. Connect the external cable to the WAN/POE port. 2. Connect the local LAN switch or computer cable to the LAN port. 1 150200002019H R04 Quick Start Guide This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

(1) this device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3 Check AP LED 1. Power LED green means normal operation. 2. 2G-WiFi and 5G-WiFi LEDs green means radio enabled. Port Description 1 GE WAN port Support 10/100/1000Mbps 1 GE LAN port Support 10/100/1000Mbps 1 Console RJ45 port 1 Default button 1 USB2.0 port 5V/500mA Size(WxDxH) 191.0x195.0x43.5mm Weight 360g Temperature Working0 C to 45 C Humidity POE Storage: -20 C to 60 C 5% to 95%

(No-condensation) WAN port support s POE, 802.3af/at power supply 2.4 GHz Radio IEEE 802.11b/g/n 5 GHz Radio IEEE 802.11a/ac/n NOMOR:63194/SDPPI/2019 HIDF16000136 2 D T L

. I O C G N T U P

N O C D U O L C A B A B I L A l 2 A 0 E A 9 1 9 0 4 0 t 4 7 t B

1 2 3 4 1. AP4220 2. 1 3. 1 4.

1

a.

d. 1. 110 mm

2. b. T 1. 2.

c. 2 1.

2. 2

1. WAN/POE

LAN 2. LAN 1 150200002019H R04

3

AP LED

LED

2G-WiFi 5G-WiFi LED

1GE WAN10/100/1000Mbps 1GE LAN10/100/1000Mbps

1Console RJ45

1 1USB2.05V/500mA

POE

(WxDxH) 191.0x195.0x43.5mm 360g

0 C 45 C

-20 C 60 C 5% 95%

WANPOE802.3af/at 2.4 GHz IEEE 802.11b/g/n 5 GHz IEEE 802.11a/ac/n NOMOR:63194/SDPPI/2019 HIDF16000136 D T L

. I O C G N T U P

N O C D U O L C A B A B I L A l 2 A 0 E A 9 1 9 0 4 0 t 4 7 t B 2

Declaration of Authorization Wie) laos Alibaba Cloud Commputing Co.,Ltd Address: Building 8, No.16, Zhuan Tang Jing Ji Qu Kuai, Xihu District, Hangzhou, Orie Hangzhou, Zhejiang Country: China Declare that:

Name Representative of agent: Ms. Mandy Wang Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Wireless LAN Access Point Type designation: AP4220 Trademark: Alibaba Cloud FCC ID: Z2AVUGAP4220 on our behalf. Date: 2020-03-23 Orie Hangzhou, Zhejiang Nels SHI XINGXING Function: manager Notes:

(1): Required for FCC application 2): For FCC it must be the Grantee Code owner or the authorized agent.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048

<2020-03-23>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AVUGAP4220 For the product stated above, we request that the following information be held confidential;

AP4220 Model name Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

< Alibaba Cloud Commputing Co.,Lta

< Building 8, No.16, Zhuan Tang Jing Ji Qu Kuai, Xihu District, Hangzhou, Zhejiang, China >

Date: 2020-03-23 FCC ID: 2AVUGAP4220 Model Number: AP4220 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Alibaba Cloud Commputing Co.,Ltd declare that this EUT (FCC ID: 2AVUGAP4220) doesnt have Ad Hoc mode function on on-US/ Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sse N eet Res Veen T ZA! WZ Name / Title: SHI XINGXING / manager Company: Alibaba Cloud Commputing Co.,Ltd Address: Building 8, No.16, Zhuan Tang Jing Ji Qu Kuai, Xihu District, Hangzhou, Zhejiang, China Phone: (+86) 571-8502-2088 Fax: (+86) 571-8526-9066 E-Mail: xingxing.sxx@alibaba-inc.com