RFB-913 Bluetooth Stereo Headsets
/User Manual User Manual v 1.0 2017.10.26
/Function Description
/Specification
//Driver Units10mm
//Frequency Range : 20Hz~20KHz
//Impedance : 16
//M.O.P : 10mW
//Sensitivity : 94dB
//T.H.D. : <1%
//Working Hours8hrs
//Battery : 100mA Li-Ion Battery
//Weight : 20g
//Product Feature Bluetooth wireless connectivity ,Ergonomic neckband design 10mm 10mm Ultimate music clarity with 10mm NdFeB drivers Dynamic element design for excellent bass performance 8 8 Up to 8 hours of battery life
//How to use 1. Micro USB" "5V 2. 3~48 3. 4. 4.6~6V 5. 1. Micro USB" "5V 2. 3~48 3. 4. 4.6~6V 5. Charge Battery 1. To connect the"Charger Port
" with the charging port of RFB-913 when it is full-charged, the indicator red will turn off. 2. The RFB-913 could be used for 8hrs approximately after being full charged 3-4hrs. 3. To maintain the life of Lithium Lon Battery, the music function will not be active while being charged. 4. The power range should be from 4.6V to 6V, use the advised power resource to prevent the danger. 5. Charging the battery Charge the battery before using the headphones for the first time or when the headphones has been unused for extended periods.
//
1. " "
2. "ALTEAM:RFB-913"
3. 4. " "
//
1. " "
2. "ALTEAM:RFB-913"
3. 4. " "
Power ON/ Power OFF/Bluetooth Pairing Mode 1. Turn on Bluetooth on your Smartphone, and then press and hold the headsets "POWER SWITCH " button down until the indicator will flash blue and red in one second. 2. Activate your Bluetooth device and search for the device name "ALTEAM : RFB-913". 3. The RFB-913 pair up successfully, and then the indicator light flash blue continually. 4. Press and hold the "POWER SWITCH " down, and the indicator light turn off. 1. ;
2. ;
3. ""
1. ;
2. ;
3. " "
Music Mode 1. Press button to volume up. Press and hold button to play next song. button to volume down. Press and hold 2. Press 3. Press and hold "Play/Pause Music
"button to play and stop the music. button to play previous song.
"" 23 21
"" 23""
21 Call Function The indicator light will flash 3 times every 2 seconds while having the phone call
(DU sounds prompted), then press the power switch to receive, and press the same button again to hang up. DPS button again, turn off DPS function and indicator displayed off.
/
1. 2.
/
1. 2. Trouble Shooting No audio at headphone 1.Check the volume control of headphone and audio source. Make sure they are neither in the lowest volume nor in mute. 2.Ensure the music play program is installed correctly. IOSAndroid LR IOSAndroid LR Cautions:
Ensure your Smartphone's Bluetooth feature is activated. Please refer to your Smartphone user guide for IOS or Android specific instruction. Long time use of earphones and too loud sound will damage your hearing. Don't use earphones when driving or cycling or you may cause traffic accidents. Don't use earphones in case that danger may occur. Please distinguish the left and right part when wearing the earphone.
:
NCC:
;
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Model:RFB913 FCCID:UAORFB913 THISDEVICECOMPLIESWITHPART15OFTHEFCCRULES. OPERATIONISUSBJECTTOTHEFOLLOWINGTWOCONDITIONS:
(1)THISDEVICEMAYASSEPTANYINTERFERENCRABD
(2)THISDEVICEMUSTACCEPTANYINTERFERENCERECIVED, INCLUDINGINTERFERENCRTHATMAYCAUSEUNDESIREDOPERATION. MadeinTaiwan ALTEANINC.,