FCC ID: 2BEED-C7011E C7011E Charger

Tablet Sleeves and Charging Dock (User Guide) 231211 A) Introduction The Charge Dock C7011Xyz(*) is a device that provide charging function to Tablet using either contact (via pogo pins), or contactless charging. With the USB Type-C connector interface built into the Tablet sleeves, the Tablet sleeves allows you to easily connect various Tablet to perform battery charging function. What's in the box Your docking station ships with the components shown below:

1. Docking station 2. Tablet sleeves 3. User guide 4. USB-C to DC2.1 cable Front View Side View Tablet Sleeves Docking Station USB-C to DC2.1 cable Figure A B) Hardware requirements Before using the Charge Dock, ensure that Tablet has a USB Type-C that is designed to support charging function. C) Setting up your docking station 1. Connect the USB Type-C connector of the Sleeves to the Tablet. 2. Connect the USB-C cable to any USB power source. Then, connect the DC jack (from the other end of the cable) to the 2.1 mm DC-in power input on the Charge Dock C7011Xyz. 3. Place the Tablet into the Sleeves and align it properly. Tablet Sleeves D) Charging Handset The Charge Dock C7011Xyz features a wireless charging pad for charging Tablet. Steps 1. Align and place the Tablet on the Charge Dock. 2. The Tablet charging indicator should turn on and the Tablet should start charging automatically.

(Not Supply) Tablet

(Not Supply) Any USB power source 3 1 Figure C DC2.1 USB-C 2 Cable

(Not Supply) Remarks : D100Xyz (*) X= D (contact charging), E (wireless charging) y = A, B, .., etc. stands for various Tablet models that can fit into the provided Tablet Sleeves z = 1, 2, , etc. stands for various colour for the device (1=Silver, 2= Black, ., etc.) Figure D C701Xyz (Tablet Sleeves / Dock) Theory of Operations 231214 A) Introduction The Charge Dock C7011Xyz(*) is a device that provide a basic charging function as well as waking up a tablet device, using a very basic form of close proximity detection (without a touch). What's in the system The docking station system do have the following components shown below:

1. Docking station :

IR Transmit / Receive module (IR proximity sensor), a. b. Application Processor c. DC input, d. Circuit to generate instantaneous voltage dip for Wireless Charging Transmitter while Tablet is on dock e. Wireless Charging Transmitter module 2. Handset sleeves : Wireless Charging Receiver module B) Operations (Charging function) 1. Upon the installation of Wireless Charging Transmitter & Receiver on the Dock & Sleeves (respectively). 2. The Wireless Charging Transmitter will transmit electricity through the air by creating a magnetic field between two circuits, a transmitter and a receiver C) Operations (Proximity Sensing, while Tablet is setting on Dock) 1. With the built-in IR Proximity Sensor, the Dock will send the instantaneous voltage dip to the Sleeves. Hence, it will turn the screen on upon someone approaching to the Docking station. 2. Operating procedure is as follows :

a. Put the Tablet onto the dock b. When someone (or, an object) approaching to the Docking station c. The proximity sensor detect and analyse a large enough change from the background readings and react appropriately. d. The proximity sensor will, then, trigger an interrupt and send a signal to the Application Processor (when the detected IR signal past the threshold that was set). e. Application Processor control the power line circuit to generate instantaneous voltage dip while charging the tablet f. The tablet will turn the screen on. Charging Dock Charging Sleeves IR Tx/Rx IR Proximity Sensor Application Processor DC Input Wireless Charging Transmitter Wireless Charging Receiver USB Tablet This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

all f S

2

J

D s

a

iO

ALLIED VANTAGE INTERNATIONAL LIMITED Unit 1805, 18/F., Stelux House, 698 Prince Edward Road East,San Po Kong, Kowloon, Hong Kong China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-1-10 To whom it may concern:

We, ALLIED VANTAGE INTERNATIONAL LIMITED, hereby certify that the equipment for which authorization is sought (FCC ID: 2BEED-C7011E) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Rommy Wu Director ALLIED VANTAGE INTERNATIONAL LIMITED

ALLIED VANTAGE INTERNATIONAL LIMITED Add: Unit 1805, 18/F., Stelux House, 698 Prince Edward Road East,San Po Kong, Kowloon, Hong Kong China Date: 2024-1-10 FCC ID: 2BEED-C7011E Dear Sir/Madam, We, ALLIED VANTAGE INTERNATIONAL LIMITED Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: C7011E Charger Model no.: C7011E, C7011EA1, C7011EA2, C7011EA3, C7011EA4, C7011EAS, C7011EA6, C7011EA7, C7011EA8, C7011EA9, C7011EA0, C7011EB1, C7011EB2, C7011EB3, C7011EB4, C7011EB5, C7011EB6, C7011EB7, C7011EB8, C7011EB9, C7011EBO, C7011EA1, C7011EC2, C7011EC3, C7011EC4, C7011EC5, C7011EC6, C7011EC7, C7011EC8, C7011EC9, C7011ECO, C7011ED1, C7011ED2, C7011ED3, C7011ED4, C7011ED5, C7011ED6, C7011ED7, C7011ED8, C7011ED9, C7011ED0O Sincerely, Name/Title :

Company: ALLIED VANTAGE INTERNATIONAL LIMITED Address: Unit 1805, 18/F., Stelux House, 698 Prince Edward Road East,San Po Kong, Kowloon, Hong Kong China Phone: 852-27518213 Fax: N/A E-Mail: rommywu@hptasia.com TTT TT ET TE 4

og Uy'}svy Proy PIEMpY aduLg g69 ASNOFL XN]AIG A/S GOST un CALINTT TWNOLLVNUALNI ADVINVA darTTV ANOJ@G UMOYS SSGJPPE BU} JE OW JDEJUOS O} BB4j 99) aseaid suojsanb Aue sAey gdINEP MOU INO jo BuHeyeW /eN}Oe oy) [JUN JeENUEpyUOS suJeLes uoReuwOyur eaqisues sseutsng yey} Bulunsue jo siseq el) UO Ayyenuepyuco uwey-poys sy,

*SJO}JEGWOD JNO O} }yeUaq JO eq PINOD yey} UOHEULOJUF Aueyeudosd pue sjei0es Spel} INO U!e}UOD S}!QI4XSe Ayyenuepyuoo uus}-Huoj oyL WEUSPYUOD uua | -6u07

}eHUSPYUOS pjey eq UOeUUOJU! BuImo}jo} a4) Jey) ISeNbes eM sroge paye}s PNposd ay} 104 3attozd 3tT029-03358Z SueU apo aoo4 syonposd Buimojjoy a4) 40) Ayenuepyuoo sysenbes em joy UOHeUUOjU| JO WOP@J4-4 OY) JO (y)(q)zgg Youseg pue (y'4'D Lt) SeINY S,UOISsIUWOD ey) JO ESP PUe LS'OS sydesbeseg 0} JUeNSING

<0} b-pZ0Z>:032q 9012 AW eIquinjog peoy SIIIW PUBDEO Ser yoursg Bulsses0d4 uoneoddy UolsiAig UOHeZWOUINY juewdinb3 UOISSIWWOD UOHESUNWWOD |espe4 VSN U! Bd1IAJaS UOHJIIjNPOD 4104 1S4ANDAY ALITVILNAGIANOD

ALLIED VANTAGE INTERNATIONAL LIMITED Unit 1805, 18/F., Stelux House, 698 Prince Edward Road East,San Po Kong, Kowloon, Hong Kong China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-1-10 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BEED-C7011E including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title:

Company: ALLIED VANTAGE INTERNATIONAL LIMITED Address: Unit 1805, 18/F., Stelux House, 698 Prince Edward Road East,San Po Kong, Kowloon, Hong Kong China Phone: 852-27518213 Fax: N/A E-Mail: rommywu@hptasia.com

ALLIED VANTAGE INTERNAT Unit 1805, 18/F., Stelux House, 698 topples osdetal Kowloon, | | tai San Po Kong, Federal Communications Commission sf reer Kong, China :

Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023/01/09 ALLIED VANTAGE INTERNATIONAL LIMITED acknowledges thair consent for the following contact located in the United States to act as their agent far service of process for the equipment for which authonzation 1s sought

(FCC 1D: 2BEED-C7011E) Name and company of U.S. agent: AQCE Corporation Inc. Physical U.S. address of agent: 6547 N Academy Bivd #2266 Springs, CO 80918 United States FRN of U.S. agent: 0033401381 Email address of U.S. agent: wwbj2008@126.com AQCE Corporation Inc. acknowledges their obligation to accept service of process on behalf of ALLIED VANTAGE INTERNATIONAL LIMITED ALLIED VANTAGE INTERNATIONAL LIMITED with the FRN [0034703454] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.94 1(0)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. auntie SSW \ | Signature R viii Wu Johnson Wang a 4 PM ae AOCE Corporation Inc. ALLIED VANTAGE INTERNATIONAL LIMITED