accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Keyfob The KEY-101 is a battery-operated, wireless remote small enough to fit in a bag, pocket, or on a keychain. The remote gives users the ability to arm and disarm their security system from a distance. In case of emergency, users can activate the systems siren and automatically call the central monitoring station. Adding Sensor to the Panel To add a Remote to the panel, set your panel to sensor learning mode, and program the sensor as a non-supervised sensor then exit program mode. Testing To test KEY-101 go to test mode on your panel and ensure the panel volume is loud enough to hear. Next, hold one of any buttons down for two seconds. Listen for the appropriate verification sounds (see panel instructions for more details). When you are finished, Exit test mode. Battery Installation/Replacement To install or replace batteries in the KEY-101, open the remoteby removing the screw on the back of the remote and remove the front plate. Remove the existing battery from under the circular battery holder. Insert the new battery into the circular battery holder with the plus sign (+) facing up. Snap the front plate back onto the remote and secure the screw on the back of the remote. Specifications Signal Range: 100m Open Air Frequency: 345.00 MHz Supervisory Interval:60 minutes Operating Temperature: 0-49 Operating Humidity: 5-90% Non-Condensing Battery Type: One (1)CR 2032 FCC COMPLIANCE STATEMENT*
This device complies with FCC Rules and Regulations as Part 15 devices. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID:OC7KEY-101 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in