TM InnovationShareFun Content User Manual
<Toaster PRO>
1.0 - General Information 1.1 - Charge up your Toaster PRO 1.2 - Install Toaster APP on you iPad/iPhone
/iPod Touch 1.3 - Turn your Toaster PRO WiFi On/O 1.4 - Connect Toaster PRO to iPad/iPhone/iPod Touch 2.0 - Introduction on Toaster App (4.1.5) 2.1 - Set your Toaster PRO SSID and Password 2.2 - Bridge your toaster to your WiFi network 2.3 - Fix IP setting 3.0 - Use your Toaster PRO as a Travel Router 4.0 - Toaster PRO Hardware Specication 5.0 - FAQ Model# ADTP-150 Do Page # P1 1.0 General Information 1.1 Charge up your Toaster PRO
<Package Content>
- Toaster PRO (ADTP-150x) x 1
- USB Cable (60cm) x 1
- AC Adaptor x 1 (Optional)
- Quick Start Guide x 1
- Warranty Card x 1
<Default Setting>
SSID: Toaster-f20xxxx Password: 88888888 Hints: a unique SSID is assigned to each of the Toaster PRO, you can change your preferred SSID and Password in setting page
(Please refer to instruction 2.1). Product Overview SD Card Slot WiFi status indicator (Blue) PC card reader status indicator (Green) Ethernet port / LAN port USB Drive/USB HDD Connection Power Charger/PC connection Power On/O Reset Battery Level indicator
(Red/Orange/Green) P2 Model # ABTP- 150 At rst time use, please fully charge the battery of your Toaster PRO We highly recommend user to charge battery for 8 hours before rst time of use Normal charging time is about 3 hours(WiFi O mode) To charge the Toaster PRO, connect theUSB cable to the Adaptor and the ToasterPRO as below diagram. 1 2 The battery level indicator will turn Green or Orange
(when Batteryis critically low) while charging. Battery Indicator LED will be o once battery is fully charged. P3 1.2 Installing Toaster APP to you iPad/iPhone/iPod Touch Go to Apple App store, search Alpheus Toaster and install the App to your iPad/iPhone/iPod Touch. 1.4 Connect iPad/iPhone/iPod Touch to Toaster Pro Go to Settings, Press WiFi button to turn Toaster PRO on, the WiFi indicator LED will turns on in Blue color. Toaster needs approximately 25-30 seconds to initialize. Once Toaster WiFi is Ready, the Blue LED is will be blinking in a regular speed At Settings WiFi, you will discover the Toaster SSID from your iPad/iPhone/iPod touch, select Toaster. 1.3 Turn your Toaster PRO WiFi On/Off Press to turn on/o the Toaster PRO WiFi WiFi Status table below:
Stays on WiFi Connecting Fast Blink Data Transferring Regular Blink WiFi is ready, iPad/iPhone connected Slow Blink WiFi is ready, iPad/iPhone not yet connected OFF WiFi is O P4 P5 2.0 Introduction on Toaster App (4.1.7) SToaster App may upgrade from time to time, Diagram of the interface may be changed on newer version. For most updated introduction, pls visit our website:
www.alpheus-digital.com or go to setup and select Help, you will see the latest User Manual.
(a)
(b)
(c)(d)
(a) Search Files
(b) Refresh the screen / Reconnect
(c) Thumbnail View / Single View
(d) Download to download you selected image to the App
(e) Files on Toaster
(f) Files on App Local Storage
(g) Transfer le(s) from App back to Toaster storage (SD Card/USB drive)
(h) Settings
(e) (f)
(g) (h) 2.1 Set your Toaster PRO SSID and Password You can re-dene your SSID and Password by the following steps 1Go to WiFi Setting in Toaster App 2Input your New Device name(SSID) 3Input your New Password and press one conrmed P6 P 2.2 Connect your toaster to your WiFi network This Repeater function allows your iPad/iPhone to connect your Toaster to the WiFi network while accessing Toaster storage contents simultaneously.
(For DHCP Non-Fixed IPenvironment) 3Input the Password of the acquired network. 1Go to WiFi Settings of Toaster App, Click on WiFi Repeater 2Select the WiFi Connection you want to be connecting. 4Once Password is input, the network setting will be saved to Toaster and Toaster will auto reboot.
(Toaster can memorize the network setting and you will not be ask for password once it saved) P8
(For Static IP Non-dynamic IP environment) P9 4Input your IP and Gateway and 5Select the WiFi Connection you want to bridge 1)Go to WiFi setting of toaster APP click on Advance setting 2Select Repeater Mode 3Select Static IP 6Input the Password ot the acguirednetwork and press OK 7Input your IP and Gateway and P10 P11 2.3 Setting Up Your Access Point mode Toaster is default as Access Point, DHCP mode, if you are trying to use Toaster PRO in a static IP network, you will need to input your IP Address and Gateway. Please follow below instruction. 3) Select Static IP 4) Input your IP and Gateway and 1) GO to WiFi setting of toaster APP chck on Advance setting 2) Select Access Point Mode P12 P13 FCC ID: OC7ADTP-150W Company: Alpheus Digital Co., Limited Name: Toaster Pro Model Number: ADTP-150W This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.