AltekAI Camera Quick Start p1 Product Specifications Model name: AICAMX2 Max resolution: 8MP Operating temperature: -C ~ 4 C Focal Length: 4mm F number: F1.8 USB:Type C (DC in only) Sensor: 1/1.8 CMOS p2 Parts and Controls p3 Before start Register account at https://azure.microsoft.com/
Log in by your azure account to Azure portal. Choose + Create a resource, then choose Internet of Things. Then, create your own Iothub and IotEdge
(Refer to https://docs.microsoft.com/en-us/azure/iot-fundamentals/for detail) Choose + Create a resource, then choose Internet of Things. Then, create your own Iothub and IotEdge Copy the value of either Connection stringprimary key or Connection string secondary key to a notepad that you will use later. A connection string looks like HostName=xxxxxxxxxx.azure-
devices.net;DeviceId=xxxxxxxxxxxx;SharedAccessKey=xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxx p4 Add iotedge device at Azure cloud p5 Select your device
, and set module p6 Add IotEdge module p7 Setup for vison module codes snippet in Container Create Options
{"HostConfig": {
"Binds": [
"/data/misc/camera:/app/vam_model_folder"
],"NetworkMode": "host"
},"NetworkingConfig": {
"EndpointsConfig": {
"host": {}
}}}
Press Save one aove ready p8 Click Configure advanced Edge Runtime settings button at the bottom and add this line "User": "root", in Create Options. Then, press save and next p9 Submit your setting p10 Get connection string from azure cloud first. Then, input connection string by OOBE process to device p11 OOBE by webpage -1 URL: setaicamera.ms Connect device with PC via Wi-Fi You can check your SSID and password at bottom of device
( Default password is 12345678 if there is no label at bottom) p12 OOBE by webpage -2 Scan and select available wi-fiapfor internet access Press next directly at 1st page if you dont want change device wi-fipassword and sshaccount p13 OOBE by webpage -3 Input your connect string at webpage p14 Connection to IotEdge After OOBE, wait for connection confirmation feedback from web site once edgeAgentis run You can check by below adbshell cmd Device will automatically run IotEdge next boot-up no matter internet is available or not
dockerps p15 p16 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
CAUTION:
-Reorient or relocate the receiving antenna. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
-Increase the separation between the equipment and receiver. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help. operation.
(1) this device may not cause harmful interference, and RF Exposure Information (SAR)
(2) this device must accept any interference received, including interference that may cause undesired This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID: 2ACQ9-16880002 To ensure that RF exposure levels remain at or below the tested levels, use a belt-clip, holster, or similar accessory that maintains a minimum separation distance of 5mm between your body and the device.