SAFETY WARNINGS!
Improper use of batteries may lead to overheating, breakage or leaking.
- Do not mix old and new batteries.
- Do not mix different battery brands.
- Install batteries with correct polarity. The flat side (negative terminal) of the battery should rest against the spring.
- Remove dead batteries immediately.
- Avoid liquids, which can short circuit the batteries.
- The truck or remote will become unresponsive when batteries are low, at which point you should replace all batteries with new ones.
- Remove the batteries if you will not use the truck for a long time. Avoid using near furniture or glass to prevent damage to these objects. Do not play on roads. Do not play in crowded areas to avoid injury or damage. Choose a safe location away from traffic. Do not use truck during a storm or when lightning or thunder are present. Do not use in a wet , sandy or muddy environment as truck may become damaged. Do not modify or attempt to replace the built-in original antenna on the remote or truck. Doing so will damage the Do not pull on any wires that are part of the truck. Such action may cause the wires to break and the truck to malfunction. Keep fingers, hair and clothes away from the trucks spinning tires. Failure to do so may result in physical injury. Never aim the truck at other people. Do not throw the truck or purposely hit it with any object. Store truck in a cool environment, away from high-temperature sources such as fires, stoves, radiators, etc. This truck has no user-serviceable parts. Do not attempt to modify components or circuit board. set and affect operation. Limited 90-Day Warranty NORTH AMERICA AMAX Group USA warrants to the original consumer that this product is free from any electrical or mechanical defects for a period of 90 DAYS from the date of purchase. If any such defect is discovered within the warranty period, AMAX Group USA will repair or replace the unit free of charge upon receipt of the unit, shipped postage prepaid and insured to our warranty center. The warranty covers normal consumer use and does not cover damage that occurs in shipment or failure that results from alterations, accident, misuse, abuse, neglect, wear and tear, inadequate maintenance, commercial use or unreasonable use of the unit. Removal of any parts/components voids all warranties. This warranty does not cover cost of repairs made or attempted outside by third-party individuals or companies. Any applicable implied warranties, including warranties of merchantability and fitness, are hereby limited to 90 DAYS from the date of purchase. Consequential or incidental damages resulting from a breach of any applicable express or implied warranties are hereby excluded. Some states do not allow limitations on the duration of implied warranties and do not allow exclusion of incidental or consequential damages, so the above limitations and exclusions in these instances may not apply. REPAIR/REPLACE PRODUCT If your product begins to malfunction or stop working, immediately email our warranty center at the email listed below. If it is determined that a return is necessary, our warranty department will issue you an RMA number/form and an address to the nearest return center for shipping the product to. IMPORTANT NOTICE: We will reject all returns that are not accompanied by an issued RMA form and number so make sure to contact our warranty center before attempting to return your product!
PREPARATION FOR SHIPPING YOUR PRODUCT Please repack your product in a durable box, preferably in the original carton, and send it prepaid, and adequately insured. Include the RMA form that was issued by our warranty department along with your daytime telephone number and email address inside the shipping carton. If your warranty has expired, contact our warranty center for charged service. For further information please send all inquiries to:
customercare@amaxbrands.com IMPORTANT NOTICE!
DO NOT ATTEMPT TO SHIP YOUR PRODUCT BACK WITHOUT FIRST CONTACTING OUR WARRANTY DEPARTMENT BY EMAIL AT:
customercare@amaxbrands.com FCC Part 15 C Notice CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. INDUSTRY CANADA NOTICE: CANADA ONLY. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter dout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B) This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit rpond aux spcifications techniques pertinentes d'Innovation, Science et Dveloppement conomique applicables. INSTRUCTION MANUAL Thank you for choosingPOWER CRAZE. With proper care, your new POWER CRAZE will provide you with many hours of enjoyment. Please read this instruction manual completely before using the product for the first time, and then keep this manual in a handy place for future reference. Conforms to safety requirements of ASTM, FCC,RSS210 and CPSIA. This product is manufactured by Amax Group 12645 Memorial Drive Suite F1 #388 Houston, TX 77024 Power Craze is the registered trademark of Amax Group 2008 All rights reserved. Visit us at www.amaxbrands.com Made in China CT-2022 CA 8 Colors and styles may slightly vary. PACKAGE CONTENTS POWER CRAZE High Speed RC Truck Remote control USB charger Screwdriver 2. Install batteries into the remote control. Using the enclosed screwdriver to open the battery cover on the remote control (see diagram D). Insert 2 AA batteries (not included) into the battery compartment, matching polarity (+ and -) marked inside. Replace the battery cover and scure it. CHARGING THE BATTERY 1. Turn off the Power Craze then insert the charging plug into the truck charging socket on the bottom. The charging plug fits only one way. Dot not force it (see illustration A,B). 2. Connect the USB end of the cable to your computers USB port or a USB wall charger (see diagram C) , The Red CHARGE indicator light turns OFF to show that charging is in progress. 3. Average charging time is approximately 30-35 minutes (via 5.0V 2A USB wall charger). The truck operates for approximately 13-15 minutes on full charge. 4. The red charging indicator turns on when the battery is fully charged. Note: Periodically examine the charger for external damage. External damage to the charger may result in the risk of fire, electric shock, or injury to persons. Never use a damaged adapter. TRUCK DIAGRAM Shell Rubber Locker Head Lights Arrow Mark Tire Charging Socket ON/OFF Switch B REMOTE DIAGRAM Speed Mode Switch ON/ OFF Switch Power Indicator Steering Wheel Throttle Trim Throttle Red Charging Light A c A A A A BATTERIES NOT INCLUDED (2XAA) D SYNCING YOUR POWER CRAZE Your POWER CRAZE features an automatic 2.4G channel selection system that allows up to 8 people to race side by side in the same wireless range. For One Player:
1. Before starting, make sure that the power on both your remote control and truck are in the OFF position. Make sure that there are no other 2.4G devices in the area. 2. Turn ON the truck and set it down on a flat surface the head light will turn on. 3. Turn ON the remote control. When the remote control's power indicator turn on, pull the throttle all the way down, your truck and remote control should synced. If pairing fails, repeat steps 1-3. For Multiple Players:
1. Before starting, make sure that the power on all trucks and controllers are in the OFF position. Make sure that there are no other 2.4G devices in the area. 2. Each person will have to sync a truck individually at a different time to avoid interference. Follow steps 1 to 3 above, making sure to keep away from other people while also making sure that no one else is syncing at the same time. 3. After syncing, leave the truck ON until all players have synced their trucks. 4. If there is interference, all players must turn off their controllers and trucks and restart the syncing process. OPERATION Steering Wheel trim 1. Turn your truck on:
Fully charged your Power Craze and install 2 fresh AA batteries into the controller. Sync your truck and remote control and set the truck on the ground. 2. Driving your truck:
Pull the throttle halfway to drive forward at low speed. Pull the throttle fully to drive at high speed. Push the throttle forward to make truck move in reverse. Turn the steering control to the counterclockwise to turn the truck left. Turn steering to the clockwise to turn the truck right. To break or quickly stop simply pull or push the throttle in the opposite direction. STEERING WHEEL TRIM ADJUSTMENT If the Truck can not go forward straightly you may need adjust the steering wheel trim on the bottom of the truck from time to time until the truck can go forward straight. (see diagram E) E WARNING DO NOT USE TRUCK IN CLIMATE WEATHER!
TROUBLESHOOTING Before sending your truck in for repair, please check for a solution below. Problem Possible Cause(s) Solution Truck will not move. Weak batteries; no batteries SPEED MODE SWITCH You can drive your Power Craze in low and high speed. Simply push the Speed Mode Switch to right, the Power Craze speed change to high speed mode. Truck does not respond properly to remote control. Truck and remote not synced properly Another RC truck may be transmitting on the same radio frequency THROTTLE TRIM If your Power Craze automatically go forward or backward, you need adjust the Throttle Trim to proper postion to keep the Power Craze stay. Truck loses connection to remote control. Using truck in a small enclosed area Using truck indoors Low batteries in transmitter or vehicle Install new batteries in remote control and recharge the truck. Refer to sync section and re-sync your truck and remote. Move to a new location where no other RC trucks are present. Move outdoors to a large open area. Install new batteries in remote control or recharge your truck. Truck battery has fully charged, but slower than normal. Driving truck for too long at high speeds, causing motor to overheat Turn truck off for 10-15 minutes.