AMI Global 6280 S. Valley View #212, Las Vegas NV, 89118 Phone 702-478-9700 Fax 702-478-9707 Website www.amiglobal.com VAPOR-C MANUAL & SPECIFICATIONS VERSION: 2.4 DISCOVER YOUR DIGITAL POTENTIAL TABLE OF CONTENTS SAFETY STATEMENTS ........................................................................................................................................ 3 FCC LABEL ...................................................................................................................................................... 4 SPECIFICATIONS ............................................................................................................................................... 5 ASSEMBLY ...................................................................................................................................................... 6 DIMENSIONS .................................................................................................................................................. 6 MOUNTING .................................................................................................................................................... 7 WIRING ......................................................................................................................................................... 9 BATTERIES REPLACEMENT ................................................................................................................................ 11 Date 11/18/18 11/26/18 01/15/19 Document Version Comments 2.0 2.2 3.4 Created Adding FCC label artwork Update text By Ori Peled Ori Peled Ori Peled DISCOVER YOUR DIGITAL POTENTIAL 2 SAFETY STATEMENTS WARNING: Changes or modifications which are not expressly approved by AMI Global LLC could void the users authority to operate the equipment. The distance between user and products should be no less than 20cm AVERTISSEMENT: Les changements ou modifications qui ne sont pas approuvs par COMPANY XXX pourrait annuler l'autorit de l'utilisateur de faire fonctionner l'quipement La distance entre l'utilisateur et de produits ne devrait pas tre infrieure 20cm ATTENTION: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. The distance between user and products should be no less than 20cm. ISED RSS-GEN statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS(s) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. ISED RSS-102 This system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits specified by Health Canada Safety Code 6. The system must be installed at a minimum separation distance from the antenna to a general bystander of xx inches (xx cm) to maintain compliance with the General Population limits. Lexposition aux radiofrquences de ce systme a t value selon la norme RSS-102 et est juge conforme aux limites tablies par le Code de scurit 6 de Sant Canada. Le systme doit tre install une distance minimale de xx pouces (xx cm) sparant lantenne dune personne prsente en conformit avec les limites permises dexposition du grand public DISCOVER YOUR DIGITAL POTENTIAL 3 FCC LABEL (VERIZON CAT-1 MODEL) FCC LABEL (VERIZON CAT-M MODEL) FCC LABEL (AT&T / T-MOBILE CAT-1 MODEL) DISCOVER YOUR DIGITAL POTENTIAL 4 SPECIFICATIONS I/O Communication Measurements EDGE computing Notifications Operation modes User interface Dimension & build Standards Environmental conditions Analog input x 4: 0-2.5V, 0-10V / 4-20mA (SW configurable) Digital input RS485 Half-Duplex 4G LTE cellular cloud connectivity 900MHz RF star-network configuration for multiple pumps connectivity BLE GPS 3-Axis vibration monitoring [Inch/Sec]
Temperature 5 [F]
Battery voltage [V]
Radial velocity RMS Axial velocity RMS 3-Axis velocity FFT @ Five selected frequencies o Where x = rotation freq. ex. 1x, 2x, 3x, 7x, 10x Rotation velocity [RPM]
Operational hours Axis velocity RMS threshold cross Radial velocity RMS threshold cross Velocity amplitude threshold cross in any of the FFT selected frequencies Operational time threshold cross Temperature threshold cross Analog measurement threshold cross Digital input changes or flow frequency threshold cross Battery: 1 yr. @ 4 sample/hour and 2 cloud updates per day External DC power: 9..24VDC; up to 20 sample/hour and 8 cloud updates per day Internet browser Mobile apps: IoS and Android using BLE for on-site offline device connectivity 3.4x3.4x1.9 Robust glass filled PP enclosure IP65 comply Mounting screws 4x #8-32 x1 inch long FCC Part 15 (see label) RoHS comply Temperature: -22F/+158F DISCOVER YOUR DIGITAL POTENTIAL 5 ASSEMBLY DIMENSIONS DISCOVER YOUR DIGITAL POTENTIAL 6 73.66 (2.9") Typ. x4(3.4")(3.4")(1.9") MOUNTING Use the #8-32 x 1 screws to secure the VAPOR-C to the monitored equipment (9/64 Allen wrench). If the device is used as a pump controller or communication gateway, then there is no importance to the orientation;
however, if also used for rotating equipment vibration monitoring then follow the below for the right orientation. DISCOVER YOUR DIGITAL POTENTIAL 7 Mounting orientation Mounting screws DISCOVER YOUR DIGITAL POTENTIAL 8 Radial X WIRING Use the Allen wrench 5/6 (8mm) to unscrew the cover from the base. Open the box, so you have access to the wires terminal block Run the 6-wire cable through the cable gland in the bottom. For water resistance environment use cable AMI part#400-0048. If other cable is used, ensure cable outer diameter of 8mm and smooth cable jacket for proper sealing. Connect the wires according to the wiring diagram below DISCOVER YOUR DIGITAL POTENTIAL 9 DISCOVER YOUR DIGITAL POTENTIAL 10 Digital input wiringSignalSignalDINGNDDINGNDOpen collector Dry contact 4-20mASensor#10-10VSensor#4I/O are functional only when device is connected to external power supply BATTERIES REPLACEMENT Use Energizer L91 Ultimate Lithium 3 x AA batteries ONLY DISCOVER YOUR DIGITAL POTENTIAL 11