HD-SDI RX WIRELESS MODULE FALCON RX AMN36254 USER GUIDE 1.0 Version 0.1 Version 2.4 AMIMON Confidential 1 Important Notice Important Notice AMIMON Ltd. reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to AMIMON's terms and conditions of sale supplied at the time of order acknowledgment. AMIMON warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with AMIMON's standard warranty. Testing and other quality control techniques are used to the extent AMIMON deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. AMIMON assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using AMIMON components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. AMIMON does not warrant or represent that any license, either express or implied, is granted under any AMIMON patent right, copyright, mask work right, or other AMIMON intellectual property right relating to any combination, machine, or process in which AMIMON products or services are used. Information published by AMIMON regarding third-party products or services does not constitute a license from AMIMON to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from AMIMON under the patents or other intellectual property of AMIMON. Reproduction of information in AMIMON data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. AMIMON is not responsible or liable for such altered documentation. Resale of AMIMON products or services with statements different from or beyond the parameters stated by AMIMON for that product or service voids all express and any implied warranties for the associated AMIMON product or service and is an unfair and deceptive business practice. AMIMON is not responsible or liable for any such statements. All company and brand products and service names are trademarks or registered trademarks of their respective holders. Contact Us US Office Israeli Headquarters Japan Office 2350 Mission College Blvd. Suite 500 Santa Clara, CA 95054 Tel: +1 650 641 7178 2 Maskit St. Building D, 2nd Floor P.O.Box 12618 Herzlia 46733, Israel Tel: +972-9-962-9222 Fax: +972-9-956-5467 contact@amimon.com FS Building 9F. 1-14-9 Higashi-Gotanda Shinagawa-ku Tokyo 141-0022, Japan TEL +81-3-3444-4305 contact.japan@amimon.com Version 1.0 AMIMON Confidential 2 Revision History Revision History Version Date Description 1.0 February 17,2013 Initial Release Version 1.0 AMIMON Confidential 3 Table of Contents Table of Contents Important Notice ............................................................................................... 2 Revision History ................................................................................................ 3 Table of Contents .............................................................................................. 4 List of Figures .................................................................................................... 5 List of Tables ..................................................................................................... 5 Chapter 1 6 Introduction ....................................................................................................... 6 Chapter 2 7 Overview 7 2.1 AMN36254 WHDI Sink (RX): ........................................................................................................................ 7 2.1.1 AMN36254 - General Guidelines (Rx) .............................................................................................. 7 2.1.2 LEDs .................................................................................................................................................. 8 2.1.3 On/Off switch ...................................................................................................................................... 9 2.1.4 Boot button ......................................................................................................................................... 9 2.1.5 Reset button ....................................................................................................................................... 9 2.1.6 Input Voltage connector ..................................................................................................................... 9 2.1.7 Microcontroller .................................................................................................................................. 10 2.1.8 IR blaster .......................................................................................................................................... 10 2.1.9 USB .................................................................................................................................................. 10 2.1.10 External On/Off switch connector .................................................................................................... 11 2.1.11 I2C connector ................................................................................................................................... 11 2.2 Antennas ...................................................................................................................................................... 11 2.3 Block Diagram ............................................................................................................................................. 11 Chapter 3 12 FCC Caution ..................................................................................................... 12 Version 1.0 AMIMON Confidential 4 List of Figures List of Figures Figure 1 Rx AMN36254 .......................................................................................................................................... 7 Figure 2 Block Diagram ........................................................................................................................................ 11 List of Tables Table 1: Technical Specifications ............................................................................................................................... 6 Table 2: Receiver Specifications................................................................................................................................ 6 Version 1.0 AMIMON Confidential 5 Chapter 1 Introduction The AMN36254 is wireless A/V receiver board, which works at the 5GHz unlicensed band. It is are based on AMIMON's WHDI Professional chipset that consist of the AMN2220_A4W baseband receiver and the MAXIM 2850 ICs, presents the ultimate solution for HD-SDI receiver of the WHDI system. The perfect HD/SD video, audio quality, the high robustness and the invisible latency of the wireless system are unmatched by any other wireless technology and presents a true alternative to cable. The WHDI system transmits uncompressed video and audio streams wirelessly and thus simplifies and eliminates system issues, such as:
lip-sync, large buffers and other burdens like retransmissions or error propagation. System Technical Specifications:
Video Resolution:
1080p/50, 1080p/60, 1080/59.94i, 1080/50i, 1080/29.97p, 1080/23.98p, , 720/59.94p, 720/50p, 525i/59.94, 625i/50, 1080/24p, 1080/24PsF, 1080/23.98PsF,1080/25PsF Frequencies:
Non-DFS Frequencies:
5.15 ~ 5.25 GHz 5.725~5.825 GHz DFS Frequencies:
5.25 ~ 5.35 GHz 5.47 ~ 5.725 GHz Video Interface:
Two SDI outputs over 75 Ohm BNC. Environment:
Operational - 0:40 C, 10%~90% humidity Storage - 0:55 C, 10%~90% humidity Range:
Up to 50 meter line of sight. Audio:
Over SDI Table 1: Technical Specifications Receiver Specifications:
Video Interface:
Receiver AMN36254 SDI splitter Option to connect external connector board Antenna:
Voltage:
Size:
User interface:
4 receiving +1 transmitting/ receiving 7-17 V
(L)130mm x (W)106mm x (H )13mm 3 LEDs indicating Power, Video lock and Network lock USB connector for software update Reset button Table 2: Receiver Specifications Version 2.4 AMIMON Confidential 6 Chapter 2 Overview Overview 2.1 AMN36254 WHDI Sink (RX):
The AMN36254 WHDI Sink is designed to be at the receiver end of the WHDI downstream. The AMN36254 receives wireless downstream transmission, demodulates it and regenerates the video, audio and control content transmitted by the AMN35254 WHDI source. The receiver works at the 5GHz unlicensed band. 2.1.1 AMN36254 - General Guidelines (Rx) Figure 1 Rx AMN36254 Version 1.0 AMIMON Confidential 7 1143251112131415161718192021222367892524GND VDD 10 01- Down link antenna CH#0 02- Down link antenna CH#1 03- Down link antenna CH#2 04- Down link /UPLINK antenna CH#3 05- Down link antenna #4 06- Reset Button 07- HD-SDI output1 08- HD-SDI output2 09- FPGA JTAG port 10- DFS antenna (located on PS) 11- MAC DEBUG Port 12- APP DEBUG Port 13- Interface connector 14- LED #4 15- LED #3 2.1.2 LEDs Overview 16- LED #2 17- LED #1 18- DIP Switch 19- TBD 20- Boot Button 21- Input Voltage connector 7-17v 22- ON/OFF Switch 23- External On/Off switch connector 24- USB 25- IR 1- Power- the LED is ON when the power is applied and the ON/OFF switch is ON 2- Video Lock (Gennum lock) 3- Network (blink while searching, solid on when connected to Tx) 4- Unused. Version 1.0 AMIMON Confidential 8 Overview 2.1.3 On/Off switch System has a main switch that turns on and off. The system is active when the switch is near J1 (voltage input connector) 2.1.4 Boot button Boot mode is a technical mode. In order to operate this mode you should hold "Boot button" for 5 seconds, when the system wakes up and then press momentary and simultaneously the "Reset button". 2.1.5 Reset button The "Reset button" clears the dynamic memory and reboots the system. 2.1.6 Input Voltage connector Input voltage connector contains 4 pins, 1: +BAT. 2: Power supply. 3: GND. 4: GND. Version 1.0 AMIMON Confidential 9 2.1.7 Microcontroller Overview The connectivity microcontroller. It includes the following:
line, ARM-based, 32-bit STM32F103 chip is used as the AMN36254 128 KB Flash Memory USB Interface device with Mini-B connector IR Blaster UART JTAG SPI to Baseband and SPI Power Jack 3 LEDs indicators power, video lock and network lock Software reset Push Buttons Reset Button 3 DIP Switches USB for software update Hidden button for registration Hidden button for Reset IR option with micro jack connector to place the IR outside the box 2.1.8 IR blaster AMN35254 support PWM interface to IR blaster via audio 2.5mm jack, for mechanical dimensions of the audio jack follow the datasheet http://www.cui.com/pdffiles/SJ-2523-SMT.pdf , Silk number: U47. 2.1.9 USB There is a USB connector on board that is connected to the application uC. This will be used for software upgrade through WHDI monitor. USB type: USB mini-B connector, Silk number J15. Version 1.0 AMIMON Confidential 10 Overview 2.1.10 External On/Off switch connector This connector is used for external On/Off switch, Pin 1 is VDD, Pin 2 is Power Enable. 2.1.11 I2C connector I2C Host interface connector is used for transferring I2C protocol message between the host chip (Micro Controller STM32F103) and the slave component. Pin-1: 3.3v, Pin2: SCL Pin3: SDA Pin-4: GND 2.2 Antennas This module is authorized to be used only with the RP-SMA external antennas with 5dBi gain or less. The module also use 2dBi chip antenna for reception only. 2.3 Block Diagram Figure 2 Block Diagram Version 1.0 AMIMON Confidential 11 AMN 2220 (BB Rx)FlashSPIMaxim 2851(RFIC Rx)DLI/QULI/QPADDRAiroha 7230USBPower7-17VYCbCr[29:0]HS,VS,DE,DCLKUARTAPP UARTI2SMAC UARTUSBSTM32F103 UARTSPIRSTRSTINTMasterSlaveFPGA2972YCbCr[19:0]SDISPI, CFGJTAGSDIButtonsLEDs FCC Caution Chapter 3 FCC Caution Any changes or modifications not expressly approved by the responsible party could void the user's authority to operate this equipment. Notice:
This module in its final integration requires the end-product to continue to comply with DFS requirements. A class II permissive change may be required for operation not already described in the FCC Grant filing. OEM Labeling Requirements Notice: The OEM of final integrator must ensure that FCC labeling requirements are met. For a host using this module, if (1) the modules FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module should be used, with the following contents: Contains FCC ID:VQSAMN36254. The host OEM user manual must also contain clear instructions on how end users can find and/or access the module and the FCC ID. The applicable usage is to be used as a wireless device, connected to the back of a professional camera and transmitting live video, coming from BNC connectors NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radi-ate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. The antenna used for transmission must be installed to provide a separation distance of at least 20cm fro m all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Version 1.0 AMIMON Confidential 12