OWNER'S MANUAL CT424 DAB BT/ TUNER CT424 DAB BT Safety Information Thank you for purchasing this product, please read the manual carefully before operating, and reserve it for future reference. PRECAUTIONS Only in a 24-volt DC negative-ground When replacing the fuse, be sure to use electrical system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit. Make sure that pins or other foreign objects do not get inside the unit, they may cause malfunctions, or create safety hazards such as electrical shock. If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. Keep the volume at a level at which you can hear outside warning sounds (horns sirens, etc.). CAUTION DO NOT open covers and do not repair by yourself. Ask the dealer or an experienced technician for help. General Power supply:
24V DC (18~32V) Maximum power speaker: 4X20W Suitable speaker impedance: 4 ohm 10A Fuse spec:
Weight:
0.56kg Dimensions (WxDxH):
188x118x58.5mm FM Stereo Radio Frequency range: 76 - 90 Mhz (japan mode ) 87.5 - 108 MHz 50dB Signal/noise ratio:
AUTO Step:
100KHz AM (MW) Radio Frequency range:
Step:
LW Radio(EURO) Frequency range:
AUTO Step:
EXT (AUX) Jack Stereo 3.5mm 300mV auxiliary source DIGITAL RADIO (DAB) Frequency range:
Step:
174.928-239.200 MHz 1452.960-1490.624MHz 20KHz 153-280KHz 1KHz 522-1620KHz 9KHz EN-1 Contents Safety Information ..................... .................1 Specifications............................................... 1 Panel Controls..............................................2 Button Tips....................................................3 Bluetooth Functions .................... ................7 USB function Summarization.........................7
.................................................8 DAB function Other function
...............................................10 FCC............................................ ...11 Troubleshooting............................................12 User Safety Code You need to enter password when power on, the original password is 1234. BEFORE OPERATION Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operation. Note:
1. According to models with different wiring to content, please refer to the model harness connect of the the label. 2. subject to change without notice due to improvements in technology. and the design are Radio, USB (when USB inserted), AUX IN, Panel Controls
(1). - Microphone
(2). - Power on (press),
- Mute (short press),
- Adjust volume (rotate)
- Power off (long press)
(3). - Press to toggle the playing Sources:
A2DP (when Bluetooth is connected),
(4).- Band switch:
- Auto memory system:hold it to automatically search station and save the strongest signal station to preset from 1 to 6 on the current band. DAB
- Hold it more than 2 seconds and rotate the
[volume] knob to select PTY mode. DAB 1 / DAB 2 / DAB 3
(5). - Press [SEL] and rotate [volume] knob to select EQ (equalizer) preset mode.
- Press to confirm,when selecting the PTY mode, When in dial number mode, press [SEL] to start and rotate [volume] knob to dial a phone number.
(6). - Radio mode: Press [DSP] (display) to
(7). - Radio mode:
access: PTY info/ Display FM/AM frequency/clock
- MP3 mode: track duration
- Hold it to enter setting mode Automatic search the station from high to low. 1 2 10 11 SRC SEL DSP 9 16 3 4 5 6 7 8 12 13 1 2 INT 3 RPT 4 RDM 5F 6F 14 15 Hold the touch 2 seconds for manual station search.
- MP3 / BT music mode Select the previous track Fast rewind (long press) only USB
(8). - Radio mode
- MP3 / BT music mode Select the next track Fast forward (long press) only USB
(9). - USB slot
(10). - Play/pause (when USB / BT music) Automatic search the station from low to high:
Hold the touch 2 seconds for manual station search EN-2 of the track (10 seconds) with an USB device.
(11). - Auto playback at the begining
(12). - MP3 repeat play
(13). - MP3 random play
(14). - MP3 folder back/Answer/Dial/Call
(15). - MP3 folder ahead/Hang off/
Disconnect (long press)
(10-15).
-1-6 radio preset Press to select tune in a preset station. transfer/Hang on Hold for more than 2 seconds to save current station.
(16). - AUX Button Tips Tuner mode DAB mode USB/AUX/BT source TA DAB FMLK DAB LBND ON ON ON OFF OFF OFF DAB ANT PASSIVE ACTIVE SCROLL ON OFF DIMMING AUTO MANUAL OFF DIM DISP DIM KEY DISMAN
-3 to +3
-3 to +3 DIMDAY DIMNIGHT SWRC SET ON OFF SWRC TYPE RESIST PWM VOL LAST ADJ LAST S-VOL 5 to 30 PWD SET PWD CLOCK DISP CLOCK 12/24H BEEP TIMER ON ON OFF OFF 00:00 00:00 24HOURS 12HOURS ON ON OFF OFF TA ON OFF MIC SEL AUTO ANS AUTO CON BT VOL SCROLL FRONT REAR (BT source) ON ON OFF OFF 0 to +7
(BT source)
(BT source)
(BT source) ON OFF
(USB(MP3) source) DIMMING AUTO MANUAL OFF DIM DISP DIM KEY DISMAN
-3 to +3
-3 to +3 DIMDAY DIMNIGHT SWRC SET ON OFF SWRC TYPE RESIST PWM VOL LAST ADJ LAST S-VOL 5 to 30 PWD SET PWD CLOCK DISP CLOCK 12/24H BEEP TIMER ON ON OFF OFF 00:00 00:00 24HOURS 12HOURS ON ON OFF OFF TA TA mode TA return TA vol AF REG CT ON ALARM OFF SEEK RETUNEL RETUNES 10 to 35 ON ON ON OFF OFF OFF RUR/URB RURAL URBAN ST/MONO STEREO MONO DIMMING AUTO MANUAL OFF DIM DISP DIM KEY DISMAN
-3 to +3
-3 to +3 DIMDAY DIMNIGHT MW LW SWRC SET ON ON ON SWRC TYPE REIST VOL LAST ADJ S-VOL OFF OFF OFF PWM LAST 5 to 30 PWD SET PWD CLOCK DISP CLOCK 12/24H BEEP TIMER AREA AUDIO ON ON OFF OFF 00:00 00:00 24HOURS 12HOURS ON ON EUR OFF OFF USA JAPAN AUSTRA LATIN BASS BAS -7 to +7 TREBLE TRE -7 to +7 BALANCE FADER LOUD EQ OFF 0 0 ON POP LEFT 7 RIGHT 7 FRONT 7 REAR 7 OFF CLASSIC ROCK JAZZ EN-3
/
6F+] button to select MP3
] button to go to the previous or
] to enter fast forward or reverse Button Tips MP3 Playback Track skip Press the [
next track. MP3 track fast search Hold it [
/
back mode. Folder select 5F-]/[
Press the [
folder back/ahead. Set Clock Radio mode:
Press [DSP] button, turn and turn display PTY/
Clock/current channel. MP3 playback mode: press [DSP] button, turn and turn about folder name/file name/ID3 TAG/Clock Then press [DSP] button more than 2 seconds, Clock displayed, press [SEL] button, rotate the
] button to set,
[volume] knob and press [
press [SEL] to confirm. Automatic clock setting :
While listening an FM RDS station, transmitter updates automatically time on the radio unit. Clock format:
Press several times on [SEL] button to view 24 hours. Rotate [volume] knob to select 12 hours mode
(displays PM or AM). System setting On the non time display menu:
Hold the [DSP] to enter the system setup menu, and press [
CLOCK SEEK TA MODE ALARM/
TAL VOL(10 TA RETURN/RETURNS
] button to select:
TA(ON/OFF)
/
/
DX/LOCAL REG(ON/OFF) ST/MONO AF(ON/OFF) to 35) CT(ON/OFF) AUTO ANS(ON/OFF) BEEP(ON/OFF)
(REAR/FRONT) OFF) OFF) TIMER(ON/OFF) BT VOL(0 to +7) AREA S- VOL(5 to 30) AUTO CON(ON/OFF) MIC/SEL 12/24H SWRC SET (ON/
SCROLL(ON/
VOL LAST/ADJ PWD(ON/
PWD SET OFF) Wait for 1s and rotate the knob to adjust. TA mode Enable /Disable automatic switching to FM- tuner mode in case of incoming Traffic announcements. Rotate the [volume] knob to select TA ALARM or TA SEEK mode. If the TA (traffic announcements) is turned on and there is no traffic program identification code received in the specified time, no TA/TP will display and either TA ALARM or TA SEEK will be activated. TA ALARM mode Alarm is turned on A beep sounds and the display show No TA-
TP when you are listening a radio station that does not broadcast TP info. TA SEEK mode TA SEEK is automatically activated. The radio will automaticaly search for a new TP compatible transmitter in case of signal loss on the station playing. Note EUROPE area: add to RDS function, JAPAN, AUSTRALIA and USA area: no RDS function. TA setting EN-4 Rotate [volume] knob to set ON/OFF. TA VOL mode Rotate the [volume] knob to to adjust TA VOL 10-35. VOL ADJ mode Rotate the [volume] knob to select VOL ADJ or LAST mode. If ADJ selected after pressing >> S-VOL will display to adjust the sound [volume] at the radio ignition settings from 5 to 30. TA RETURN On the FM mode, set the TA time space Info of auto search with RDS. Setting for LONG, Auto search the TA time space for 180 sec, Setting for SHORT, auto search the TA time space for 45 sec. AREA SETTING AREA setting: Rotate the [volume] knob to select EUROPE, USA, JAPAN, AUSTRA, LATIN Audio setting
]
Press [SEL] button, and press the [
button to select BASS/TREBLE/BALANCE/
FADER/LOUD/EQ function, rotate the knob to adjust. Radio Operation Radio seek automatically Press the [
station rewind / forward. Radio tune by step
] button more than 2 seconds, switch Hold [
]
to the MANUAL mode, then short press [
button to step search the station rewind / forward. Manual Memory Store At FM1/FM2/FM3/MW1/MW2/LW mode, press and hold button 1-6 to save current station in memory. You can save up to 36 stations in total.
] button to auto search the
/
/
/
/
Button Tips RDS AF (Alternative Frequency):
When the radio signal strength is weak, enabling the AF function will allow the unit to automatically search another station with the same PI, but with stronger signal strength. PS (Program Service name): The name of station will be display instead of frequency. Press 2 seconds the [DSP] button and select [
] to set AF/TA/REG, rotate the
[volume] knob to open or close AF/TA function.
/
PTY function Hold the [SRC] button to PTY function, rotate the [volume] knob, display NEWS and POP program type. Press 2 seconds [SRC] button and rotate the [volume] knob to select the type of station INFO-SPORT-EDUCATE-DRAMA-
CULTURE-SCIENCE-VARIED-POPM-
ROCK M-EASY M-LIGHT M-CLASSICS-
OTHER M-WEATHER-FINANCE-CHILDREN-
SOCIAL-RELIGION-PHONEIN-TRAVEL-
LEISURE-JAZZ-COUNTRY-NATIONM-
OLDIES-FOLK-DOCUMENT-TEST-ALARM REG on: AF function will implement the regional code (of the PI) and only stations in the current region can be tuned automatically. REG off: AF function will ignore the regional code(of the PI) and stations in the other regions can also be tuned automatically. CT ON/OFF While listening an FM RDS station, transmitter updates automatically the clock on the radio unit. Automatic display of the clock This function allows to display automatically the clock instead of the "standard" display
(tuner, Aux, A2DP, USB). After 15 seconds, in case of manipulation of buttons the display will turn back to "standard" display and will return on the clock. nb : Noted: some radio stations, besides their name, reveal " RT + " information (name of the artist, titles, etc.), in this case the clock will display between 2 scrollings of text. Activation:
Press 2 seconds on "DSP" and then press the
] several times to select function. button [
CLOCK_DISP displays, select ON to activate the function.
/
BT Audio To play music from a Bluetooth device and control with the unit. 1. Press [SRC] button several time up to select BT MUSIC mode. If the Bluetooth device is connected, the display shows A2DP. 2. To play or pause, press "1" and/or [
MUSIC mode : If the Bluetooth device is connected, the display shows A2DP. to skip the track
]
/
EN-5 VOL LAST/ADJ mode Rotate the [volume] knob to select VOL LAST or ADJ mode. In ADJ mode, rotate the [volume] knob to adjust S-VOL 5-30. BEEP mode Rotate the [volume] knob to select button beep sound on or off. SCROLL mode Rotate the [volume] knob to select SCROLL (ID Tag) mode on or off. SWRC function
(system wired remote control) This function allows to control main functions of the radio (VOL-/VOL+ /Source /SEEK+/SEEK-/
Tune Memory /BT-OFF hang off) in USB/BT/
A2DP/AUX. To do so, you need a wired remote to connect to the female input 3.5, yellow connector at the back of the radio. SWRC SET Activate or deactivate the steering wheel controls SWRC (RESIST / PWM) on CT412-
DAB A l l o w s y o u t o s e l e c t t h e s i g n a l mode of the steering wheel controls:
Button Tips
> RESIST: chain of resistors
> PWM: frequency - 100 Hz at 12 Volts Timer ON/OFF Timer ON: when ignition of the machine is off, you can turn the unit on by pressing POWER button, and it can work for about 2 hours Timer OFF: when ignition of the machine is off, the unit can't work anymore.
/
AREA mode Press [DSP] button more than 2 seconds, then press [
] button several time to select AREA funtion. Rotate the knob to select
"EUROPE--USA--JAPAN- AUSTRA-LATIN". NB : the radio will delete the preselected station memory
/
LOUD ON/OFF Press [SEL] to display EQ OFF,then press
[
] button several time to select LOUD function. Rotate the [volume] knob to select Loudness ON or OFF. STEREO/MONO mode
(in Radio mode) Press [DSP] button more than 2 seconds, then press [
] button several time to select ST/
MONO funtion. Rotate the [volume] knob to select FM stereo or mono.
/
LOCAL ON/OFF mode (OFF=DX) Press [DSP] button more than 2 seconds, then press [
] button several time to select DX/LO. Rotate the [volume] knob to select tuner sensitivity distant or local.
/
MIC In Default settings, the MIC SEL is "REAR". The micro cable is connected at the rear of the radio, we advise you not disconnect the micro cable in order to avoid losing it. On the non time display menu:
Press and hold [DSP] button more than 2 seconds, then press [
] button several time to select MIC SEL and rotate the [volume]
knob to select "FRONT".
/
EN-6 Bluetooth Functions Pairing 1. Open the device's BT function, 2. Search bluetooth equipments by your device. Please make sure your device be detectable 3. Select unit CT424 DAB BT to connect.
(through the menu on the device). 6F+] button more than 2 Press [
seconds, and the Bluetooth device will be disconnected (only in A2DP mode or phone use).
] or [
] or [
AUTO CON mode Press [DSP] button more than 2 seconds. Press [
] to display "AUTO CON". Rotate the [volume] knob to select AUTO CON mode, select on or off. When it is on, it will automatically connect the device. AUTO ANS Press [DSP] button more than 2 seconds. Press
[
] to display "AUTO ANS". Rotate the [volume] knob to select AUTO ANS mode, select on or off. When it is ON, the radio will automatically hang on after a ring tone (4/5). BT mode selecting Press [SRC] button to select BT mode. Pres s [DSP] button to display the A2DP information. Dialing 1. Phone dialing Use your mobile phone dialing, LCD screen displays dialing information. 2. Unit dialing Press [SRC] button to switch to A2DP(BT) mode. Press [
5F-] the picture hang on and
"DIAL NO" appears on the LCD, then press
[SEL] button to enter dialing mode. Press USB Function Summarization you can free media connection on the phone on the phone, enter the Bluetooth setting position yourself on the device go to the setting at this device uncheck the setting " audio parameter Media"
close the acces parameter the first device received an transmit call, the second device playing the audio media, to return to standard parametrage, tick the box of the first device having disconnected the second device Voice commands In the A2DP mode, you can use voice commands (mobile application SIRI / Google voice / and Android) to make a telephone call from the phone book or write a SMS. Voic e commands func tion mus t be activated on your telephone and avoid noisy environment. Loading/Take out USB equipment nepO 1. the USB cap located on the bottom left of the unit, insert a USB device into the connector and the unit will begin to play automatically. oT stop playback of USB device, push the
[SRC] button to non USB mode and then remove the USB device. 2.
/
] button and rotate the [volume] knob
[
to input dialing numbers, press [
button to dial out. 3.You can search for any call, dialed, missed, or received. As previously for ""DIAL NUM""
function, select ""Dialed"", ""Missed"" or
""Received"", 5F-]
5F-] butto n to 5F-] button to answer a call, 6F+] button to hang up.
> Press the [SEL] button to enter the selected history.
> Turn the [VOL ] knob to scr oll thro ugh the contacts.
> When the contact's name or mobile phone number is displayed, press the [5F /] button to call the mobile phone number of this contact. Press the [6F /] key to end the call Voice switch During the call, Press the [
transfer between the unit and your phone. Hang up/Answer Press [
Press [
A2DP mode On A2DP music playing mode, press [1] button to pause/play. Press [
/
In AD2P mode, if your phone is paired you can order vocally by "SIRI" or "Google " application to select and give a call. On some ANDROID versions you can separate phone book and music management in order to connect two Bluetooth devices 1. Standard Setting (one device phone and media)with your phone you can receive and send a call and listen to your music at your device 2. Double connection (2 phones connected at second in A2DP mode(listen to your music) in BT ( receipt and phone call)
] to previous or next track. the same time) EN-7 DAB function DAB Radio Selection DAB/DAB+ Provides radio programs in digital sound quality. To access Digital Audio Broadcast
(DAB) press the [SRC] button and select DAB DAB Service SCAN "Synchronising"
If the antenna is not connected, ""No signal""
will be displayed. If the tuner has never been used, ""No service"" will be displayed. Automatic scan:
The radio will initiate an automatic scan of the DAB transmitters for the first operation, or if the DAB transmitters is lost. Manual scan:
In DAB mode, if you want to launch a scan, hold down the ""BAND/SCAN"" button for 1 second. The screen will display the message ""SCAN OK"" and will display the numbers 1 to 100K one after the other (DAB block). At the end of the scan, the screen will display the number of stations received (e.g. FOUND 39 = 39 stations found) and will broadcast the first station. Select DAB group
"Press the [ BAND ] Button to select one of the available DAB groups:
DAB1 > DAB2 > DAB3. They allow the storage of 6 stations each"
Tuning a DAB Service To tune a DAB service push [<< / >> ]
to select the next/previous DAB service. Tuning is shown on the Display, Then the station is automaticaly broadcast DAB Service List
"To get an overview of receivable DAB services . Push [SEL] for 2 seconds to open the DAB Service List, Rotate the [VOL]
knob to scroll through the list of receivable stations. Push [SEL] to tune a DAB service
. Tuning is shown on the display, then the station is automaticly broadcast "
Storing DAB Favourites
" T h e r e a r e 3 f a v o r i t e D A B g r o u p s available (DAB1 -> DAB2 -> DAB 3). Select DAB1-2-3 where you want to store the station, then press the preset button for more than 2 seconds "
Recall Stored Favourites To recall a preset station, briefly press the desired button (1 to 6) Switching automatic between DAB and FM (DABFMLNK) When the DAB signal quality drops significantly, it is prefered to switch and listen to the service via FM. Switching between DAB and FM (DABFMLNK) can be disabled via the system settings menu. EN-8 Note: If the AF indicator is not displayed, the radio has not found the corresponding station in FM and can not switch from DAB to FM and vice versa Rural / Urban Press the [</>] button several times to select RURAL / URBAN. Turn the [volume]
button to select the appropriate tuner mode:
RURAL (poor reception) or URBAN (locations near emitters). BT VOL Adjusts the level of the AD2P-BT relative to other sourcies (from 0 to +7). This radio allows manual or automatic dimming of the display and key buttons. S e l e c t " " D I M M I N G " " f r o m t h e s e t u p menu and select one of the following:
> Select ""OFF"" to deactivate dimming
> Select the ""MANUAL"" attenuation when the radio is not connected to the vehicle ignition pin . The change between day and night mode is done by selecting Settings m e n u " " D I M D A Y " " o r " " D I M N I G H T " "
> Select the ""AUTO"" attenuation when the radio is correctly connected to the vehicle ignition pin (A6, +12 V lantern or pilot lights), the lighting will change when the parking light is switched on. Select Manual dimming to adjust Brightness of display and Buttons". Select DIM MAN and change between day mode and night mode by selecting DIMDAY or DIMNIGHT"
> To adjust Night Brightness of the display and buttons select DIMNIGHT
> To adjust Day Brightness of the display and buttons select DIMDAY""
DAB function DIM KEY Select "DIM KEY" and adjust the brightness from the buttons DIM DISP Select "DIM KEY" and adjust the brightness from the display MW (ON/OFF) To enable/disable MW Reception LW (ON/OFF) To enable/disable LW Reception DAB FMLK Switching automatic between DAB and FM
(DABFMLNK). When the DAB signal quality drops significantly, it is preferred to switch and listen to the service via FM. Switching between DAB and FM (DABFMLNK) can be disabled via the system settings menu. Note: If the AF indicator is not displayed, the radio has not found the corresponding station in FM and can not switch from DAB to FM and vice versa DAB ANT Selection of Active or Passive antenna DAB LBND Rotate the knob to choose DAB LBND ON or OFF (Enable/Disable L-Band Decoding) DAB antenna set-up Position the antenna
- on the windscreen inside the car
- to the right of the driver for safety reasons
- on a fixed surface; avoid moving parts such as doors, windows, etc.
- vertically and half way up the windscreen, out of the driver's field of vision. A detailed version of the assembly notes is available to download http://pro.ams-diffusion.fr/aftersale/
Characteristics These specifications may be modified without notice. Frequency band: 170 - 240 MHz (Band III), 1452 - 1492 MHz (Band L), Impedance: 50 Connector type: SMB Cable length: 2.9m EN-9 Other functions USB functions(flash memory type) 1. USB flash memory 2 in 1 support 2. FAT 12/FAT 16/FAT 32 format supported. 3. USB 1.1 support, USB 2.0 support (For 2.0,speed performance is as USB 1.1) 4. WMA files supported 5. Maximum number of MP3 files FAT 32 format supported is 65535 files. (Maximum number of MP3 files NTFS supported is 1000 files. ) Maximum number of folders is 999. 6. Maximum USB capacity support is 8 GB and best performance with tracks not more than 500, and not exceeding 30 folders. 7. Not all USB devices are compatible with the unit. AUX mode When radio is on, press [SRC] button several time, to display AUX. When the radio is OFF but the contact and the power are ON : If your device detected the Tele-
mute signal (ground A2), the device switch ON automatically. When the signal disapeared, the device switch OFF. nb: Control the track with the external device When using AUX mode, only the POWER knob, the [volume] and [SRC] button can be used. Timer function If the device is switched on while the ignition is on, it then switches off and on again automatically with the ignition. This is provided that the A7 contact is connected to the terminal 15/30 of the vehicle. If the device is switched on without the ignition by pressing "POWER", it switches off again after 120 minutes to save the battery. The device can then be switched on again with "POWER". Caution: When the radio is switched on, the automatic antenna extends. Therefore always switch off the device when the situation requires it (e.g. in a station car wash). You can stop this function in the MENU. SRC Button Press the [SRC] button to switch from Radio, USB (when USB is connected), AUX (when the device is connected), BT audio, AD2P (when the BT device is connected)
/
] buttons to change the digits. Password entered Rotate the [volume] knob to select the digits, press the [
Once the password is fully displayed, press the
[SEL] button at least 2 seconds to confirm, the radio switches to the last tuner mode listened. If the password is incorrect, "ERROR" appears on the display. Please enter the password again. If the user code is lost, contact the After Sales Service. EN-10
/
P W D O F F / O N : A c t i v a t i n g /
Desactivating the security code. When the unit is switched on, Press [DSP]
button more than 2 seconds then press
] button several time to select "PWD
[
OFF/ON" and turn the [volume] knob to select
"ON" or "OFF": the password is activated or deactivated. When set to "ON", the radio code will be requested or if you have disconnected the permanent + (B + battery), you will have to enter the password after each time the battery is disconnected (the default password is "1234"). If you only turn off the ignition
(+15/30), the code will not be requested.
/
PWD NEW: Create a new password You can set a new password for the unit:
Press [DSP] button more than 2 seconds then press
] button several time to select "PWD SET",
[
enter your old password, press the [SEL] button at least 2 seconds to confirm. If the old password is incorrect,"ERROR" "AGN" appears on the display, please enter the password again. If the old password is correctly entered, "NEW"
is displayed, enter your new password, press the
[SEL] button at least 2 seconds to confirm. "AGN"
is displayed, enter your new password again and press the [SEL] button at least 2 seconds to confirm; "SET OK" is ;displayed: the code has been updated. FCC FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body EN-11 TROUBLESHOOTING The following checklist can help you to solve some issues which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell can cause fire or electric shock, immediately stop using it and call the save where you purchased it. Issue General The unit does not switch on. Possible cause Solution Turn your car key in the ignition. Check cables connection. Replace fuse with a new fuse of the same capacity. Check the volume or switch the MUTE function off. No sound Car ignition is not on. Cable is not properly connected. Fuse is burnt. Volume is set at minimum or the MUTE function is on. The unit system is unstable. The unit or screen does not work normally. Tuner mode Unable to receive stations. The antenna is not correctly connected properly. Please check if the antenna is correctly connected and check adaptors. Bad quality reception of radio station. Preset stations are lost. The antenna is not fully extended or it is broken. Fully extend the antenna and if broken, replace it with a new one. Please contact our After Sales Service
- Please turn back to the right AREA.
- You need to set again all parameters
- You may have changed reception AREA
(USA...) as this changing cancel all your presets stations.
- You maybe RESET the unit inadvertently (the unit has turned back to factory settings USB mode Unable to insert USB device The USB device cannot be read. Microphone practical advice :
Bluetooth microphone recommandation The USB device has been inserted the wrong way round. NTFS format is not supported. Application files such as ".exe"cannot be read Bad quality sound of the microphone Insert it the other way around. Check that the file system is in FAT or FAT32 format. Due to different formats, some models of storage devices or MP3 players may not be read. Please make sure that the USB device only contain WMA or MP3 (AAC not compatible) According the location of the radio in your machine, which microphone to use :
- If the radio location is in face to the driver, we recommend then to use the front panel microphone.
- If the radio location is not face to the driver but on the sides or rear, we highly recommend the use of wired remote microphone (rear connection) and place the microphone face to the driver. EN-12 ZA du Chevalement - Rue des Galeries 59286 ROOST WARENDIN - FRANCE Phone : +33 (0)3 27 94 44 44 Fax : +33 (0)3 27 94 44 45 Web : www.ams-diffusion.com P/N:12707500XXXX V1-122018