FCC ID: 2A4D5-G460 SPINNER

FIDGET SPINNER WITH LED LIGHTING AND WIRELESS SPEAKER Introductions This manual will help you operate the wireless speaker function of yout spinner. You should rst familiarize yourself with the wireless functionality of your cell phone or other devices before using the spinner. Safty rules 1. Please follow the rules depicted in this manual closely to ensure your safety. Before using your spinner, we would strongly encourage you to read through this user manual. 2. Be awary of any edges , uneven surfaces , metal parts , accessories and its packing so as to prevent any possible injury or damage. 3. Do not modify, repair of dismantle your spinner. Doing so may result in res, electric shocks, complete break down of this spinner etc. 4. Do not use the spinner in a hazardous location. Diagram Pairing to cell phone or other device To use the wireless function of your spinner,you must rst pair your spinner with a cell phone, tablet or computer. Once your spinner is paired to a specic device,the remain paired and automatically recognize each other whenever they are within range. Pairing to a phone and entertainment

-Turn on your phone and ensure its wireless function is activated.

-Turn on your spinner and go to the pairing mode.

-Search your wireless devices on your device by following the device s user manual for more information.

-After a few seconds the device will list the G460 as a discover device.

-Select it and follow your devices instruction to select this pairing.

-Your device will conrm the pairing, and then press Yes/OK.

-Finally, select to connect with the spinner from your device. Charge your Spinner Connect the spinner to USB Charger with the included cable. The red color led indicator is on when charging. The LED indicator turns o when fully charged. Make sure that your spinner is charged for at least 1 hour before initial use. Warning You must select a qualied charger from a regular manufacturer. You must charge the spinner if it has been not used for more than 1 month. Speaker Power on/o LED indicator USB charging port Product specication Input Output Wireless Version 5V / 0.1A 1W V5.0 Wireless Range 30 Feet Connection Frequency 2.40GHz-2.48GHz Battery Capacity 50mAh Made in China FRONT SIDE BACK SIDE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without estriction

C5266091_X10_Ed.2 Shenzhen Ground Enterprises Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A4D5-G460 To Whom It May Concern, Date: 09 Feb, 2022 to the provisions of Sections 0.457 and 0.459 of Commission's rules Pursuant

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality NOTE 2 No No NOTE 1 NOTE 1 No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. special conditions

(See II. LONG-TERM Above mentioned document contains detailed system and equipment description are the equipment. The public considered as proprietary information in operation of disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. short-term Confidentiality, the applicant requests the exhibits selected In case of above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. 1/1 C5266091_X10_Ed.2 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: WEIZHOU CHEN Title: manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Amtime Inc. DBA AAA INTERNATIONAL Company:Amtime Inc. DBA AAA INTERNATIONAL Address: 3809 S. Hill Street, Los Angeles, CA 90037 Product Name: SPINNER Model Number: G460 FCC Identifier: 2A4D5-G460 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: WEIZHOU CHEN Date: 09 Feb, 2022 Title: manager Signature of applicant:

1/1