FCC ID: 2AZVE-ADUO-C Analogue Duo

Analogue Duo User Guide analogue.co V0.1 July.2023 analogue.co Congratulations on becoming an Analogue Duo owner. Whats in the box Analogue Duo HDMI cable USB-C cable USB-C Power Supply A tribute to the original NEC console Out of the box, Duo is compatible with the TurboGrafx-16, PC Engine, Supergrafx & CD-ROM game libraries. Sync up any wireless 8BitDo Bluetooth or 2.4g controller directly to Duo for wireless play. Up to 5 player support (including miniDIN). You can connect controllers directly via wired USB, too. Some features coming in OS v1.3. analogue.coV0.1 July.2023 USB-C CONNECTION LED INDICATORS PAIRING BUTTON analogue.coV0.1 July.2023 HDMI Port Output video and audio from Analogue Duo to your display or receiver. USB Ports x 2 Connect and charge your controllers here. Power Port Insert the USB-C Cable and connect it to the USB-C Power Supply to power Duo. Pairing Button Used primarily for manual pairing of wireless controllers. Controller LEDs Indicate whether Player 1 - 4 is connected or pairing with Duo. Wired Controllers Plug any hardwired USB controller that Duo supports into a USB port and it will instantly connect to Duo. You can also use and charge any supported wireless controller as a wired USB controller by adapting it with a USB cable. Original Controllers Duo supports original controllers via the miniDIN connector. Additionally, TurboTap can be connected here for up to five player support with original controllers. Getting Started To use Duo, connect the power supply to the USB-C cable and the cable to Duo. Plug the power supply into a standard AC outlet. Duo has two USB ports which can connect and charge controllers and an original style miniDIN connector for original controllers.Duo may receive input from up to four Bluetooth controllers, two 8BitDo 2.4G controllers or two USB controllers. Up to four controllers can be connected simulatiously using any combination of these inputs. A fifth controller can be connected via the original miniDIN connection or by using an original TurboTap. When you first use Duo the system will automatically search for a wireless controller to pair with - indicated by a flashing white LED. After you pair a controller, you can activate that controller

(typically with the Start button) to turn on Duo without having to press the power button. Upgrading Duos OS and Firmware In order to Upgrade Duos OS and Firmware please visit https://www.analogue.co/support/duo to receive the most recent release. You will see an update bar on your display during the update process. If power is lost during the update, restart the update process again after power is restored. Power LED Status 1 2 3 LED Solid White LED Blinking White LED Solid Purple Power is On CD Ejecting System Sleep Controller LED Status 1 2 LED Blinking White LED Solid White Pairing Connected Ports and Indicators Power Button Press to power on or wake Duo. Hold to power off Duo. Eject Button Press to eject the CD analogue.coV0.1 July.2023 Controllers - Dock 1.1 beta Firmware Supported Controllers Switch Pro (and variants) Switch Joycon Wiiu Pro Wiimote Stadia Pairing controllers to Duo Xbox One PS3 PS4 PS5 Turbo mini 8BitDo Pro 2 8BitDo Zero 2 8BitDo Lite 8BitDo Lite 2 8BitDo M30 8BitDo SN30 8BitDo SN30 Pro 8BitDo SN30 Pro+

8BitDo N30 Pro 8BitDo N30 Pro 2 8BitDo Arcade Stick

(BT & Wired USB only) 8BitDo SNK NeoGeo 2.4g N30 2.4g N30 (Noir) 2.4g SN30 2.4g SN30 Classic 2.4g SF30 2.4g M30 2.4g M30 Classic 2.4g PCE A Controller LED indicator will start to blink. Duo is now in Pairing mode. 1. Press the pairing button on the left side of Duo or select Pair Controller from the OS menu. 2. Put your controller in pairing mode by pressing the pairing button. 3. Your controller will pair to Duo. Controller LED indicator will become solid when a controller is paired, or wired controller connected to USB port. 4. Pair additional controllers by repeating the above steps.S 8bitdo Bluetooth Controllers should be put in X-input mode. Pairing your PS4 controller: press and hold the PS button and Share button to enter pairing mode. 2.4g controllers will require new firmware to work properly with Duo and will disable compatibility with original NES, SNES, Genesis and USB controller port receivers. The firmware update can be reverted by the same method indicated to update the firmware.

+ If you experience any connectivity issues, please update your controller to the latest firmware at support.8bitdo.com

+ For most recent 2.4g and bluetooth firmware support.8bitdo.com/analogue/Dock

+ All 8BitDo controllers must be in X INPUT mode. Refer to your 8bitdo controllers manual for instructions on how to do this. Resetting Duo Restting will erase all paired controllers from the Duo. Library and Memories will not be affected. Select and confirm Gloabal Reset from the OS menu. Manual instructions: Plug the USB-C power into Duo. Wait 4 seconds then press and hold the pairing button until the Controller LEDs begin to flash green. Release the button before the green LEDs turn off. If successful, all four Controller LEDs will flash red. analogue.coV0.1 July.2023 Controllers Main system(s) default button mapping across compatible game controllers. All Bluetooth 8BitDo controllers need to be in X-Input mode before pairing. GB/GBC GBA Menu A B L R ST SE A B ST SE Game Gear 1 2 ST 8BitDo Controllers Wireless 2.4g N30 N30 Noir SN30 SN30 Classic SF30 M30 M30 Classic PCE Wireless Bluetooth Pro 2 Zero 2 Lite Lite 2 M30 SN30 SN30 Pro SN30 Pro+

N30 Pro N30 Pro 2 Arcade Stick Non 8BitDo Controllers Wireless Switch Pro Switch Joycon Wiiu Pro Wiimote PS3 PS4 PS5 Xbox One Home Home

+ SE

+ SE

+ SE Heart Heart Heart Heart

+ SE Heart Heart Heart

+ SE Heart Heart Home Home Heart Menu Home Home Home Home PS PS PS Xbox A A A A A B B I A A A A B A A A A A A B B B B B A A II B B B B A B B B B B B GBA A B A X A 2 O O O B B A B 1 X X X A

L L L L L L L L L L L L L L L L L L L L B L L L L

R R R R R R R R R R R R R R R R R R R R A R R R R ST ST ST ST ST ST ST RN ST ST

ST ST ST ST ST ST ST SE SE SE SE SE

SE SE SE

SE SE SE SE SE SE A A A A A B B I A A A A B A A A A A A B B B B B A A II B B B B A B B B B B B ST ST ST ST ST ST ST RN ST ST

ST ST ST ST ST ST ST SE SE SE SE SE

SE SE SE

SE SE SE SE SE SE B B B B B A A II A B B B A B A A B B B A A A A A B B I B A A A B A B B A A A ST ST ST ST ST ST ST SE ST ST

ST ST ST ST ST ST ST ST SE GB/GBC A B ST SE Game Gear 1 2 ST

ST Opt. Opt. Menu View

A Joy in X A

2

SE O Share O Share O B B A B 1 X X X A

ST Opt. Opt. Menu View

B Joy in A B

1

SE X Share X Share X A A X A 2 O O O B

ST Opt. Opt. Menu analogue.coV0.1 July.2023 Analogue. Duo. analogue.co analogue.coV0.1 July.2023 FCC regulatory conformance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Analogue Duo (ADO) Label and Location 20230601 SKU: ADUO-C01-SE (USA), ADUO-C02-SE (JPN) Top View Product name HDMI logo BT logo 2.4 logo (TM Analogue) Bottom View Company Made in China Input V/A FCC CE UKCA Recycle roHS Telec FCC ID Product Box Labels ID Numbers are placeholders Logo 4.5mm diameter 217-230957 FCC ID: 2AZVE-ADUO-C

Analogue Enterprises Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 3-9-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:2AZVE-ADUO-C Analogue Enterprises Ltd. certifies that the equipment for which authorization is sought is not equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

(Ernest Dorazio) Rev 1/26/2023 Analogue Enterprises Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 3-9-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AZVE-ADUO-C Analogue Enterprises Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing coverd equipment. [Lenovo (Shanghai) Electronics Technology Co., Ltd.] certifies that, as of the date of the filling of the application, the applicant is not identified on the Cover list (as specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Yar

(Applicant sigtiature)

(Ernest Dorazio) Rev 1/26/2023

Date: 5 October 2023 Analogue Enterprises Ltd. To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

Analogue Enterprises Ltd., the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on behalf of Analogue Enterprises Ltd. solely in matters in relation to the application for the FCC equipment authorization for FCC ID: 2AZVE-ADUO-C including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of Analogue Enterprises Ltd. Analogue Enterprises Ltd. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely Ry EY ____ N Ernest Dorazio."

Date: 5 October 2023 Analogue Enterprises Ltd. To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Analogue Enterprises Ltd. FCC ID: 2AZVE-ADUO-C FCC Certification Confidentiality Request Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material, Analogue Enterprises Ltd. requests that the following documents regarding this submission for FCC ID: 2AZVE-ADUO-C be kept confidential:

Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf And below exhibit kept short-term confidential (180 days):

External photos External photos.pdf Test setup photos test photo.pdf Internal photos Internal photos.pdf User manual User manual.pdf Those documents contain detailed system and equipment description and related information about the product which Analogue Enterprises Ltd. Considers confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Analogue Enterprises Ltd. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, ad Ernest Dorazio

Analogue Enterprises Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 9-Oct-23 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID:2AZVE-ADUO-C FRN: 0033871591 Analogue Enterprises Ltd. (the applicant) certifies that, as of the date of the filing of the application, Analogue, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Analogue Enterprises Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Analogue, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: Analogue, Inc. Address: US Address Contact Person: 113 Cherry Street Suite 99071 Seattle Washington USA Tel.: +1 857 246 8683 Email: alice@analogue.co Sincerely, Rev 1/26/2023