VeriLock Security Sensor Application VeriLock Security Sensor Application for Andersen A-Series Frenchwood Gliding, 400 Series Frenchwood Gliding, 200 Series Narroline Gliding and 200 Series Perma-Shield Gliding Patio Doors for Andersen A-Series Frenchwood Gliding, 400 Series Frenchwood Gliding, 200 Series Narroline Gliding and 200 Series Perma-Shield Gliding Patio Doors Thank you for choosing Andersen. / Gracias por elegir Andersen. For questions call 1-888-888-7020. For more information and/or guides visit andersenwindows.com. Please leave this guide with building owner. Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener ms informacin y/o guas, visite andersenwindows.com. Deje esta gua con el dueo de la construccin. Lea completamente la gua antes de comenzar la instalacin. Lea y respete todas las advertencias y precauciones durante la instalacin de la unidad. Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation. Check with your local building code official to identify and confirm compliance with local building code requirements. Consulte los cdigos locales de construccin para identificar y confirmar que se cumplan los requisitos del cdigo de construccin. Instruction Guide / Gua de instrucciones Parts Included / Partes Incluidas
(1)
(4) VeriLock Face Plate /
Placa frontal VeriLock
(1) VeriLock Sensor / Sensor VeriLock
(1) Actuator / Accionador
(1) CR-2032 Battery / Batera CR-2032
(1) Magnet / Imn
(2) #6 x 1" Screw / Tornillo No. 6 x 1"
(12) #10 x 2" Screw / Tornillo No. 10 x 2"
(2) Spacer (Tribeca Hardware Only) /
Espaciador (Solo para herrajes Tribeca) Tools Needed /
Herramientas Necesarias Safety Glasses / Lentes de seguridad Phillips Screwdriver / Destornillador Phillips Drill/Driver / Taladro/destornillador 1/8" Drill Bit /Broca para taladro de 1/8"
Drop Cloth / Tela protectora VeriLock Face Plate Placa frontal VeriLock VeriLock Sensor Sensor VeriLock CR-2032 Battery Batera CR-2032 Actuator Accionador Magnet Imn
#6 x 1" Screw Tornillo No. 6 x 1"
Spacer
(Tribeca hardware only) Espaciador
(Solo para herrajes Tribeca)
#10 x 2" Screw Tornillo No. 10 x 2"
Depending on individual installation requirements, some parts may not be used. Es probable que no sean necesarias algunas piezas. Esto depende de los requisitos de instalacin individual. Use caution when working at elevated heights and around unit openings. Follow manufacturers instructions for ladders and/or scaffolding. Failure to do so may result in injury or death. Sea cauteloso al trabajar en lugares elevados y cerca de las aberturas de la unidad. Siga las instrucciones del fabricante para el uso de escaleras y/o andamios. Si no lo hiciera, podran producirse lesiones o la muerte. Follow manufacturers instructions for hand or power tools. Always wear safety glasses. Failure to do so may result in injury and/or product damage. Siga las instrucciones del fabricante para el uso de herramientas elctricas o manuales. Utilice siempre gafas de seguridad. Si no lo hiciera, podran producirse lesiones y/o daos al producto. Andersen and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. 2016 Andersen Corporation. All rights reserved. Andersen y todas las dems marcas que aparezcan son marcas registradas de Andersen Corporation y su subsidiaria 2016 Andersen Corporation. Todos los derechos reservados. 9136270 BA-01 Revised 03/04/16 Batteries carry the risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212 degrees F (100 degrees C) or incinerate. Dispose of used batteries promptly and properly. Keep away from children. Les piles reprsentent un risque dincendie, dexplosion et de brlures. Ne pas recharger, dmonter, chauffer une temprature excdant 100degrs C (212degrsF) ou incinrer. liminer les piles rapidement et de manire approprie. Garder lcart des enfants. Magnetic field can be harmful to implanted medical device wearers. Keep magnets away from devices. El campo magntico puede daar a personas con dispositivos mdicos implantados. Mantenga los imanes lejos de los dispositivos. Batteries are small parts and, if swallowed, could pose a choking hazard to young children. Las bateras son partes pequeas que, en caso de ingesta, pueden representar un riesgo de asfixia para nios pequeos. Magnets are small parts and, if swallowed, could pose a choking hazard to young children. Los imanes son partes pequeas que, en caso de ingesta, pueden representar un riesgo de asfixia para nios pequeos. 1 Interior Latch Lever Palanca del pestillo Phillips Screwdriver Destornillador Phillips Lay a drop cloth down to prevent losing parts. Unlock and open door. Remove latch lever. Save latch lever for reuse and discard screws. Lay a drop cloth down to prevent losing parts. Unlock and open door. Remove latch lever. Save latch lever for reuse and discard screws. 9136270 2 2 Interior VeriLock Face Plate Placa frontal VeriLock VeriLock Sensor Sensor VeriLock
(back views)
(vistas traseras) Indicator Light Luz indicadora
(back views)
(vistas traseras)
(front view)
(vista frontal) VeriLock Sensor Assembly VeriLock Sensor Assembly Sensor Tab Lengeta del sensor Battery
(+ facing out) Batera
(polo + hacia afuera) Actuator Accionador
(Rotate actuator, then insert into hole, to avoid damage to sensor tab).
(Gire el accionador y despus inserte en el orificio, para evitar daos en la lengeta del sensor). Select preferred color VeriLock face plate. Press sensor into back side of face plate. Install actuator as shown and battery with (+) facing out as shown. Indicator light will illuminate for one second when battery is installed correctly. Seleccione el color preferido de la placa frontal. Presione el sensor en la parte trasera de la placa frontal. Instale el accionador y coloque la batera con el polo positivo (+) hacia afuera, tal y como se muestra. La luz indicadora se iluminar por un segundo cuando la batera est instalada correctamente. 3 Tribeca Hardware Only Solo para herrajes Tribeca Interior VeriLock Assembly VeriLock Assembly Latch Lever Pin Latch Lever Pin
(front view)
(vista frontal) Latch Lever Palanca del pestillo
(back views)
(vistas traseras) Spacer Espaciador Position between. Posicin intermedia. VeriLock Assembly Ensamble Verilock Insert latch lever pin through actuator slot. Inserte la espiga de palanca del pestillo a travs de la ranura del accionador. Tribeca Latch Lever Palanca de pestillo Tribeca For Tribeca hardware only, select preferred color spacer and position between the VeriLock sensor assembly and Tribeca latch lever as shown. For Tribeca hardware only, select preferred color spacer and position between the VeriLock sensor assembly and Tribeca latch lever as shown. Insert latch lever pin through actuator slot as shown. Insert latch lever pin through actuator slot as shown. 9136270 3 4 Interior Sensor contains an anti-tamper switch. Do not apply sensor over wet finish or rough/dirty surface. Improper switch function may result. El sensor contiene un interruptor de seguridad. No instale el sensor en acabados hmedos o superficies sucias/speras. Esto podra dar como resultado un mal funcionamiento del interruptor. VeriLock Sensor
(anti-tamper switch) Sensor VeriLock
(interruptor de seguridad)
(back view)
(vista trasera) Indicator Light Luz indicadora
(front view)
(vista frontal) Latch Lever
(unlocked position) Palanca del pestillo
(en posicin de desbloqueo)
#10 x 2" Screws
(included)
#10 x 2" Screws
(included) Verify panel surface is clean and dry. Position latch lever and VeriLock sensor assembly on panel as shown and fasten using #10 x 2" screws included. The indicator light will illuminate for one (1) second when the sensor assembly is applied to the panel as the anti-tamper switch is depressed. Verify panel surface is clean and dry. Position latch lever and VeriLock sensor assembly on panel as shown and fasten using #10 x 2" screws included. The indicator light will illuminate for one (1) second when the sensor assembly is applied to the panel as the anti-tamper switch is depressed. Magnet Application/ Aplicacin del imn Magnets are small parts and, if swallowed, could pose a choking hazard to young children. Los imanes son partes pequeas que, en caso de ingesta, pueden representar un riesgo de asfixia para nios pequeos. 5 Interior Do not pinch or drill through weatherstrip. Product damage will occur. Do not pinch or drill through weatherstrip. Product damage will occur. Magnet / Imn Side jamb and weatherstrip shown transparent for clarity. La jamba lateral y el burlete se muestran transparentes para que haya claridad. Side Jamb Interior Side Jamba lateral Lado interior Weatherstrip Burlete Lock Receiver Receptor del cerrojo 1/8" Drill Bit Broca para taladro de 1/8"
#6 x 1" Screw Tornillo n. 6 x 1"
Phillips Screwdriver Destornillador Phillips Position magnet on side jamb behind weatherstrip. Slide tight to interior edge of lock receiver as shown and pre-drill two (2) 1/8" holes, 3/4"
deep using magnet holes as a template. Fasten with two (2) #6 x 1" screws. Position magnet on side jamb behind weatherstrip. Slide tight to interior edge of lock receiver as shown and pre-drill two (2) 1/8" holes, 3/4"
deep using magnet holes as a template. Fasten with two (2) #6 x 1" screws. 9136270 4 6 Interior Verify VeriLock Sensor Function / Verifique el funcionamiento de sensor VeriLock Indicator Light Luz indicadora Latch Lever
(unlocked position) Palanca del pestillo
(en posicin abierto) Latch Lever
(locked position) Palanca del pestillo
(en posicin cerrado) 1. Close door without locking. Indicator light will illuminate for one (1) second. 2. Lock door with latch lever. Indicator light will illuminate for one (1) second. Verify door is locked. 3. Unlock door with latch lever. Indicator light will illuminate for one (1) second. 4. Open door. Indicator light will illuminate for one (1) second. 1. Close door without locking. Indicator light will illuminate for one (1) second. 2. Lock door with latch lever. Indicator light will illuminate for one (1) second. Verify door is locked. 3. Unlock door with latch lever. Indicator light will illuminate for one (1) second. 4. Open door. Indicator light will illuminate for one (1) second. Verify VeriLock sensor function. If indicator light does not respond as described, verify sensor application and magnet placement. Verifique el funcionamiento del sensor VeriLock. Si la luz indicadora no funciona como se describi anteriormente, verifique la aplicacin del sensor y la ubicacin del imn. Procedure is complete. El procedimiento se ha completado. Refer to monitoring system of your choice for sensor enrollment. /
Consulte el sistema de monitoreo de su eleccin para el registro del sensor. For maintenance information, please visit http://www.andersenwindows.com/verilock and consult with the VeriLock user guide. Para obtener informacin de mantenimiento, visite http://www.andersenwindows.com/verilock y consulte con la gua del usuario de VeriLock. 9136270 5 Regulatory Statements / Normas reglamentarias Federal Communications Commission (FCC) Part 15 Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference that may be received, including interference that may cause undesired operation. Industry Canada (IC) RSS Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) I'appareil ne doit pas produire de brouillage; (2) I'utilisateur de I'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by Andersen may void the user's authority to operate the equipment. 9136270 6