FCC ID: XS5-CAPMX ERA Remote Unit for Cellular Systems

COMMSCOPE CAP MX 6/7E/80 85/17E/19/23/25 C TACAPE ID No:7830127 0001 Rev: 00 A SN: 6 ANT Input: 100-240 VAC 6A 50-60 Hz IP Cl ass: |P66/x7 Model: CAP MX IC: 2237E -CAPMX FCC ID: X$5CAPMX For RoHS Inquiries:

CommScope Inc. Corke Abbey, Bray, Co. Dublin. Ireland Attn: Legal Department Andrew Wireless Systems GmbH Made in MEXICO November 2020 DLAB92

CommScope, Inc. Andrew Wireless Systems GmbH Industriering 10 86675 Buchdorf Tel: +49 9099 69 0 Fax: +49 9099 69 930 www.commscope.com To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/04/20 Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii)

(KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Andrew Wireless System (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Andrew Wireless System (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Type of Equipment subject to FCC Certification: ERA Remote Unit for Cellular Systems FCC ID: XS5-CAPMX If you have any questions, please feel free to contact me. Contact Person:

Position in the Company:

Ji eka ICN DAS Engineering Quality Senior Manager

& Grantee Contact Person Date of Signature:

4/20/2023 ___________________________ Signature of the applicant Andrew Wireless Systems GmbH Ji eka ICN DAS Engineering Quality Senior Manager jiri.cecka@commscope.com Andrew Wireless Systems GmbH, Industriering 10, D-86675 Buchdorf Geschftsfhrer: Dr. Thomas Kummetz, Alisdair Saunders Lamb More, Gillian Coleman Telefon: +49 90 99 69-0, Fax: +49 90 99 69-930, Internet: www.commscope.com Amtsgericht Augsburg, HRB No: 949, German Tax-No: 152/121/50468, VAT: DE127491606

To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA CommScope, Inc. Andrew Wireless Systems GmbH Industriering 10 86675 Buchdorf Tel: +49 9099 69 0 Fax: +49 9099 69 930 www.commscope.com Date 4/20/2023 Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7)

(KDB 986446 D01 Covered Equipment) Andrew Wireless Systems GmbH (the applicant) as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicants agent for service of process. The applicant also accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Type of Equipment subject to FCC Certification: ERA Remote Unit for Cellular Systems FCC ID: XS5-CAPMX Sincerely yours, Applicant/Grantee FRN: 0019152750 US Agent FRN: 0033464595 _________________

(Signature) ___________________

(Signature) Andrew Wireless Systems GmbH CommScope Technologies LLC Ji eka Zachary Johnson ICN DAS Engineering Quality Senior Manager Regulatory Engineer jiri.cecka@commscope.com zac.johnson@commscope.com Cross Point Tower 900 Chelmsford Street Lowell, MA 01851 Andrew Wireless Systems GmbH, Industriering 10, D-86675 Buchdorf Geschftsfhrer: Dr. Thomas Kummetz, Alisdair Saunders Lamb More, Gillian Coleman Telefon: +49 90 99 69-0, Fax: +49 90 99 69-930, Internet: www.commscope.com Amtsgericht Augsburg, HRB No: 949, German Tax-No: 152/121/50468, VAT: DE127491606

To: Federal Communications Commission Date: 2023/05/17 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Request for a Class II Permissive Change FCC ID: XS5-CAPMX Grant Date(s): 12/04/2020 Pursuant to CFR47 2.1043, the Grantee Andrew Wireless (Grantee Code: XS5) hereby requests a Class II Permissive Change for the above listed device to address following changes:

The CAP MX is a Remote Unit for the US market of CommScopes digital Distributed Antenna System (DAS), called Era. It accommodates 7 transmit and receive paths to handle up to 12 operating bands. Component suppliers have discontinued some transistors of the Linear Power Amplifier (LPA) Board in the CAP MX used for the 700 MHz path, the 850 MHz path, the 1900 MHz path and the 2100 MHz path. Equivalent replacement parts have been identified and evaluated. The carefully selected and replaced components do not change the performance of the system - any possible gain differences are compensated by the transistors RF frontend. Module and System specification, SW and production process and limits will not change. Traceability is guaranteed by increasing the suffix of the ID number on module level. The performed changes are properly documented with updated schematics/parts list of the LPA-Board including a detailed change description (LPA Board EOL Redesign). The replacement components required appropriate modification of the PCB layout therefore Notification 201209-001 and PAG for C2PCPX is applied accordingly. There are no further changes made to the original product - therefore the not repeated test results continue to be representative of and applicable also to this modified device. Sincerely R&T Assistant & Authorized Agent

To: Federal Communications Commission Date: 2023/06/02 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Compliance to Items 1 ~ 9 of KDB Publication 178919 Attachment Notification 202109-001 subject to PAG C2PCPX FCC ID: XS5-CAPMX Grant Date(s): 12/04/2020 The Grantee Andrew Wireless (Grantee Code: XS5) hereby acknowledges compliance with KDB Publication 178919 Attachment Notification 202109-001:

1) The requirements of 2.1043 are fulfilled, i.e., the devices block functions for the fundamental frequency, primary modulator circuit, maximum power, or field strength ratings shall remain unchanged.

- Requirement fulfilled because the Block Diagram and the certified RF parameters remain identical. Discontinued electronic components (here transistors of the Linear Power Amplifier board) have been exchanged with equivalent carefully selected components so that the necessary PCB layout changes kept to a minimum. Uploaded Block Diagram, Schematics, Parts List, PCB layout document in detail the performed modifications where the test reports confirm unchanged RF parameters. 2) Transmitter PCB layout and parts changes are only permitted if there is no change in identifying a devices form, functional specification, as initially granted or previously approved under a Class II permissive change.

- Requirement fulfilled the overall appearance of the PCB remains the same. Neither the shape nor the size of the entire PCB varies to the original certified device. The component changes require slightly PCB layout adaptations, that are documented in detail with the internal photos and PCB layouts. Uploaded schematics and parts list document the parts exchanges. 3) PCB changes are limited to non-substantive modifications layout changes to the same size physical circuit board previously granted.

- Requirement fulfilled because the overall appearance of the PCB remains the same than the originally certified one. Neither size nor shape of the PCB varies. Replaced components carefully selected to keep necessary PCB layout adaption to the minimum. Submitted internal photos clearly show the layout changes only related to the exchanged electronic components. 4) C2PCPX is not permitted to add, remove, augment, or change capabilities, such as transmitters, increased bandwidth, additional rule parts, bands, etc.

- Requirement fulfilled because the certified RF parameters remain unchanged. The uploaded C2PC test reports show similar test results compared to the original test reports. 5) In the PAG submission for item C2PCPX, the applicant shall provide complete information on testing demonstrating that the proposed changes for fundamental emissions are unchanged within the normal, acceptable tolerances and out-of-band;

emissions do not exceed the appropriate limits. The PAG submission shall include all applicable test reports and internal photos.

- Requirement fulfilled: Test Reports and Test Setup Photos for each individual modified frequency band showing compliance to Output Power, Zone Enhancer Gain, Occupied Bandwidth, Input-versus Output Spectrum, Out-of-bounds Emissions and Out-of-Band Refection uploaded. There are Internal Photos uploaded that allow a general comparison of the overall PCB and a detailed comparison of the individual portions for each frequency band. 6) The modified device shall not be marketed under the existing grant of certification before confirmation that the C2PCPX PAG is approved and granted.

- Requirement fulfilled: Grantee awaits approval of this C2PCPX PAG to start marketing of the modified devices. 7) Software Defined Radio (SDR) grants that use the C2PCPX procedure are not permitted to make subsequent Class III permissive changes.

- Requirement is NOT applicable because the device (Equipment Class B2I + B9B) is not certified as a Software Defined Radio (SDR). 8) The C2PCPX PAG procedure has no impact on the provisions of V) of this publication for non-SDR software-only changes; thus, adding an equipment class when related to rule changes is still permitted.

- Requirement fulfilled because the modified device remains identical RF parameters and functionalities as originally certified and documented with the uploaded C2PC test reports. 9) Class I permissive changes are not permitted3 under this C2PCPX procedure.

- Requirement fulfilled and C2PCPX applied for documented modifications. Sincerely R&T Assistant & Authorized Agent

Long/Short-term Confidentiality Request PHOENIX TESTLAB GmbH Date: 03.Sept.2020 Product Certification K6nigswinkel 10 D 32825 Blomberg FCC ID: XS5-CAPMX To Whom it may concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby requests long-term confidential treatment of information accompanying this application as outlined below: . x] Schematics [x] Parts List

[x] Block Diagram ><] Tune-Up Info

[><] Operational Description In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentilality) withheld from the public disclosure 1 for an initial period of 180 days LJ until: [| not applicable

[_] External Photos [_] Test Setup Photos

[x] Internal Photos [x] Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. Thank you for your attention in this matter. Applicants Company Andrew Wireless Systems GmbH address Industriering 10 Andrew 86675 Buchdorf Wireless Systems GmbFi 86675 Buchdort Job Title and Dept. : Specialist Reliability Compliance Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 02.01.2012 Datum: 00.00.0000 Seite 1 von 1

Long/Short-term Confidentiality Request To: Federal Communications Commission Date: 2023/06/01 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: XS5-CAPMX To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the information long-term confidential requests Grantee hereby accompanying this application as outlined below:

treatment of Schematics Block Diagram Operational Description Parts List Tune-Up Info In addition, the Grantee requests the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure for an initial period of days until:

not applicable External Photos Internal Photos Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Sabrina Berghahn PHOENIX TESTLAB GmbH R&T Assistant and Authorized Agent

PHOENIX TESTLAB GmbH Product Certification Department Koenigswinkel 10 32825 Blomberg Germany CommScope, Inc. Andrew Wireless Systems GmbH Industriering 10 86675 Buchdorf Tel: +49 9099 69 0 Fax: +49 9099 69 930 www.commscope.com Date 5/10/2023 To Whom It May Concern:

Power of Attorney Please be advised that we, Andrew Wireless Systems GmbH, authorize the following persons from PHOENIX TESTLAB GmbH:

Sabrina Berghahn to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters in the following countries:

PHOENIX TESTLAB GmbH has our permission to use our technical documents for the approvals for the following name device:

USA ERA Remote Unit for Cellular Systems FCC ID: XS5-CAPMX Unless future correspondence from FCC please extend your full cooperation to PHOENIX TESTLAB GmbH regarding matters to the above mentioned products to 12 months after the signatory date of this authorization. Contact Person:

Position in the Company:

Date of Signature:

Ji eka ICN DAS Engineering Quality Senior Manager 5/10/2023 ___________________________ Signature of the applicant Andrew Wireless Systems GmbH Ji eka ICN DAS Engineering Quality Senior Manager jiri.cecka@commscope.com Andrew Wireless Systems GmbH, Industriering 10, D-86675 Buchdorf Geschftsfhrer: Dr. Thomas Kummetz, Alisdair Saunders Lamb More, Gillian Coleman Telefon: +49 90 99 69-0, Fax: +49 90 99 69-930, Internet: www.commscope.com Amtsgericht Augsburg, HRB No: 949, German Tax-No: 152/121/50468, VAT: DE127491606

To whom it may concern to KDB 935210 D02, INDUSTRIAL (PART 20) SIGNAL According BOOSTER, we as manufacturer, Andrew Wireless Systems GmbH, Buchdorf declare that the warning below:

and the warning according to RSS-131 Issue 3 or a combined, from FCC and ISED accepted warning Label According to KDB 935210 D02, PART 90 SIGNAL BOOSTER SPECIFIC REQUIREMENTS, we as manufacturer, Andrew Wireless Systems GmbH, Buchdorf declare that the warning below:

- Product itself as label

- Packaging as label

- manual

- data sheet

- sales brochure

- all other electronic media where customer has access can be seen at:

Buchdorf, 08. Sept. 2020 AWS GmbH _____________________ F.Futter Specialist Reliability Compliance