app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2019-07-12
|
1 2 3
|
2018-10-24
|
1 2 3
|
Applicant's complete, legal business name |
Angie Hospitality, Inc.
|
1 2 3
|
FCC Registration Number (FRN) |
0027741461
|
1 2 3
|
Physical Address |
12465 S Fort St, Ste 240
|
1 2 3
|
Draper, Utah 84020-9021
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
b******@baclcorp.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
2AQSG
|
1 2 3
|
Equipment Product Code |
73500010
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
J**** M**** S********
|
1 2 3
|
Telephone Number |
+1 40********
|
1 2 3
|
Fax Number |
+1 40********
|
1 2 3
|
E-mail |
j******@angie.ai
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11 a/b/g/n/ac Module |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Does not apply |
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 | Change in identification of presently authorized equipment. Original FCC ID: NUK-DAUK-W8812 Grant Date: 06/01/2017 |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device has 20/40/80 MHz bandwidth modes.
Class II Permissive Change for the purpose of incorporating this module co?locates with 4 other radios in one host. For this module, which with a customized antenna and disabled 2.4 GHz, 5.3 GHz, 5.6 GHz, 802.11 b/g/n/a modes, and 40/80 MHz BW bandwidth; only use 5.2 GHz and 5.8 GHz function. Other 4 radios are: 2.4 GHz Wi-Fi module (FCC ID: 2AQSG-73500011) with dipole antenna, 2.4 GHz Wi-Fi module (FCC ID: 2AQSG-73500011) with PIFA antenna, Bluetooth radio (FCC ID: A8TBM64S2) and ZigBee radio (FCC ID: MCQ-XBS2C). |
1 2 3 | Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device has 20/40 MHz bandwidth modes. |
1 2 3 | Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device has 20/40/80 MHz bandwidth modes. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
Bay Area Compliance Laboratories Corporation
|
1 2 3
|
International Certification Corp.
|
1 2 3
|
Name |
L**** T******
|
1 2 3
|
F**** C****
|
1 2 3
|
Telephone Number |
408-7******** Extension:
|
1 2 3
|
886-3******** Extension:
|
1 2 3
|
Fax Number |
408 7********
|
1 2 3
|
886-3********
|
1 2 3
|
E-mail |
l******@baclcorp.com
|
1 2 3
|
J******@icertifi.com.tw
|
|