FCC ID: 2AB7K-A7910 Anker A7910 Pocket Bluetooth Speaker

Anker A7910 Pocket Bluetooth Speaker Package Contents Anker A7910 Pocket Bluetooth Speaker Micro USB charging cable (2.3 ft) AUX to Micro USB audio cable (2.3 ft) Welcome Guide Product Features Ring-box size profile fits easily into your pocket, or the small side pocket of your backpack. Impressively full sound powered by a powerful 3 watt audio driver. 12 hours of play time significantly outlasts other Bluetooth speakers. Non-Bluetooth devices enjoy unhampered compatibility with the provided AUX to Micro USB audio cable. NFC compatibility enables easier pairing. Connects automatically to the last-connected device once powered on. Specifications Product Model Bluetooth Standard Product Weight Product Size Play Time Charge Time Input Operating Range Speaker Output Power Audio Cable Type Supported Profiles Bluetooth A7910 3.0 90 5g / 3.2 0.2oz 45 45 45mm / 1.8 1.8 1.8in 12 hours 1.5 hours 5V / 1A 10m / 33ft 3W AUX to Micro USB audio cable A2DP, AVRCP Product Overview Power button LED indicator Micro USB charging & audio 2-in-1 port NFC chip location How to Turn On / Off the Speaker Press the power button for 3 seconds to turn the speaker on or off. How to Pair with Your Device 1. Press the power button for 3 seconds. The speaker will turn on and automatically enter pairing mode indicated by the flashing blue LED. 2. Activate your devices Bluetooth function and search for the device. 3. Once the Bluetooth speaker has been detected, select the product name Anker A7910 to connect.

(For devices with Bluetooth versions below 3.0, press Yes to confirm pairing. Enter a passkey or PIN code 0000 (4 zeros), then press the Yes or OK key to finish pairing.) 4. When the Bluetooth speaker and your device are successfully paired, the blue LED will go on and remain on while connected. How to Pair with a NFC-Supportive Device 1. Press the power button for 3 seconds. The speaker will turn on and the indicator will start flashing blue. 2. Enable your devices NFC function. 3. Put your device near the NFC chip location. 4. Click Yes on your devices screen to confirm Bluetooth connection. 5. When the Bluetooth speaker and your device are successfully paired, the blue indicator will go on and remain on while connected. Note: When turning on the speaker, to the last-connected device

(Bluetooth function needs to be enabled). When pairing with an additional device, disable the Bluetooth function on the previous device, the speaker will automatically return to pairing mode. Then, repeat the pairing process. it will automatically connect How to Recharge When the speakers battery is low, the speaker will announce Battery low, and the red battery indicator will flash for about 10 minutes. 1. Plug the Micro USB cable into the speakers Micro USB charging port. 2. Insert the remaining end of the USB power wire into (a) a USB AC adapter (not included) connected to a wall socket, or (b) a charging computer USB port. A steady red battery indicator will show that it is charging. 3. The red battery indicator will go off when the speaker is fully charged. LED Indicator Instructions LED indicator Blue indicator rapidly flashing Steady blue indicator Red indicator flashing Steady red indicator Red indicator goes off Meaning Pairing mode Connected to a device Low Battery Charging Fully charged Usage Tips 1. Power off the speaker when not in use and before storing. 2. The operational range of the speakers may be influenced by obstructions, such as walls, pillars, etc. To ensure a stable connection, we recommend avoiding such obstructions whenever possible and/or shortening the distance during use. 3. To protect the long-term performance of the battery, please do not place the speaker in high temperatures above 140F/60, such as in a hot vehicle or under direct sunlight. 4. Do not expose the speaker or any of its supplied parts to water or liquids. FAQ and Solutions 1. Why cant the speaker connect to my device?

a. Check to ensure your devices Bluetooth function is enabled. b. Make sure your device is within 3ft/1m of the speaker. c. Delete the pairing record(s) on the speaker or your device. 2. Can I use the speaker to play music while charging?

To protect the long-term performance of the battery, it is better to charge it when the speaker is turned off, especially when the battery is low. 3. Can I make or answer phone calls through the speaker?

No. The speaker does not feature a built-in microphone. 4. Why cant I connect by NFC?

a. Make sure that your device supports NFC functionality. b. Keep your mobile device close to the NFC chip location of the speaker when attempting to connect. c. Disable the Bluetooth connection of the speaker to other devices. FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Figure 7 The EUT-Inside View Figure 8 The EUT-Inside View Figure 9 The EUT-Inside View Figure 10 PCB of the EUT-Front View Antenna Figure 11 PCB of the EUT-Back View Figure 12 PCB of the EUT-Front View Figure 13 PCB of the EUT-Back View

Figure 1 The EUT-Top View Figure 2 The EUT-Bottom View Figure 3 The EUT-Front View Figure 4 The EUT-Back View Figure 5 The EUT-Left View Figure 6 The EUT-Right View

Product Name: Bluetooth Speaker Model No.: A7910 FCC ID: 2AB7K-A7910 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Anker Technology Co., Limited FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We,

(the approval holder) Company name Address City Country Anker Technology Co., Limited Room 1318-19, Hollywood Commercial Center, 610 Nathan Road, Mongkok, Kowloon Hongkong declare that the following representative (agent):

Name (person) Company name Addresss City Country Tom Chen Shenzhen Anbotek Compliance Laboratory Limited 1/F., Building 1, SEC Industrial Park, No.0409 Qianhai Road, Nanshan District, Shenzhen China is hereby authorized to apply the following equipment for certification on our behalf:

Bluetooth Speaker Product Description A7910 Type or Model(s) Tradename or Brand(s) Anker We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation:

City and Country:

Date:

Kowloon, Hongkong 2014-11-26 Name:

(this must be a person) Simon Zhang Function:

Product Manager Signature:

(or official company stamp)

Anker Technology Co., Limited FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012

(Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we,

(the applicant / grantee) Company name Address City Country Anker Technology Co., Limited Room 1318-19, Hollywood Commercial Center, 610 Nathan Road, Mongkok, Kowloon Hongkong request for this certification filing under:

FCC ID:

Grantee Code 2AB7K Product Number

-A7910 to maintain permanent confidentiality for the following documents submitted within this application:

(please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Operational Description Operational Description Block Diagrams Schematics Diagrams Block Diagrams Schematics Bill of Materials Description explaining the functioning of the block diagram showing the systematic building blocks of the EUT showing components, their values and interconnection List of components used on the PCBs of the EUT Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation:

City and Country:

Date:

Kowloon, Hongkong 2014-11-26 Name:

(this must be a person) Simon Zhang Function:

Product Manager Signature:

(or official company stamp)