For FAQs and more information, please visit:
anker.com/support
@anker_official
@Anker Deutschland
@AnkerOfficial
@anker_jp
@Anker Japan
@Anker
@Anker_JP Product Number: A2538 51005003171 V01 EN LED Light Bar Status Solid blue for 4 seconds, then turns off Connected to power Solid blue for 5 seconds, then turns off Charging your device Flashing blue quickly Metal or abnormal objects detected The right and left lights:
Solid blue The middle light: Flashing blue Overvoltage or undervoltage protection activated T You cannot charge your device wirelessly in these scenarios:
When using a case with a magnetic/iron plate;
When using a case with a pop socket;
When using an ultra-thick (> 5 mm) protective phone case. Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40C / 104F. Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. The socket-outlet shall be installed near the product and shall be easily accessible. Disconnection from line voltage should be made via the AC plug. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Product Name: Anker 533 Wireless Charger (3-in-1 Stand) Model: A2538 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Caution Radio Standards Specification RSS-Gen, issue 5 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. RF exposure statement:
The equipment complies with IC Radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body. Dclaration d'exposition RF:
L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 10 cm entre le radiateur et votre corps. This product complies with the radio interference requirements of the European Community. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the users body and the product. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2538 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/
This device in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out. 1.The device complies with RF specifications when the device used at 20cm form your body. GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2538 is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address:
https://www.anker.com/
Specifications Input Output 9V/12V/15V Wireless: 5W / 7.5W / 10W (for phones) 5W Max (for earbuds) USB-A: 5W Max Operating Temperature
-10C - 40C Radiated H-Field Radiated H-Field(for phones):9.44dBuA/
m(@10m) Radiated H-Field (for earbuds) :-1.7dBuA/
m(@10m) TX/RX Frequency Range 110-205KHz (for EU / UK only) Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importer is the responsible party (contract for EU and UK matters) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. DE LED-Anzeigenleiste Status Leuchtet 4Sekunden lang blau, geht dann aus Leuchtet 5Sekunden lang blau, geht dann aus Mit der Stromversorgung verbunden Ihr Gert wird aufgeladen Blinkt langsam blau Metall- oder anormale Objekte erkannt Die rechte und linke Anzeige: Leuchtet blau Die mittlere Anzeige:
Blinkt blau berspannungs- oder Unterspannungsschutz aktiviert In den folgenden Szenarien knnen Sie Ihr Gert nicht drahtlos T aufladen:
Bei Verwendung einer Schutzhlle mit Magnet-/Eisenplatte, Bei Verwendung einer Schutzhlle mit Sockel/Griff, Bei Verwendung einer ultradicken (> 5 mm) Schutzhlle. Schlieen Sie das kabellose Ladegert an einen Quick Charge 2.0/3.0- oder Power Delivery-Wandadapter an. Schlieen Sie das Gert nicht an ein 5 V/1 A-Wandladegert oder einen USB-Anschluss eines Computers an, da dies die Funktion zum kabellosen Aufladen beeintrchtigen kann. Legen Sie keine Fremdkrper zwischen Ihr Gert und die Oberflche des kabellosen Ladegerts, einschlielich Metallpads an einer Kfz-Halterung, Magnetkarten, Trschlssel, Mnzen, NFC-Karten oder andere Metallgegenstnde, da diese das kabellose Ladegert mglicherweise entmagnetisieren, die Ladegeschwindigkeit beeintrchtigen oder eine berhitzung verursachen knnen. Kabellose Ladegerte machen das Aufladen praktischer als Ladegerte mit Kabel, haben aber eine langsamere Ladegeschwindigkeit als Ladegerte mit Kabel, da sie durch die aktuelle kabellose Technologie eingeschrnkt sind. Hohe Temperaturen verringern die Ladegeschwindigkeit und schrnken die Leistung ein. Es wird empfohlen, dass Sie Ihr Gert in Umgebungen mit Temperaturen unter 40C aufladen. Wichtige Sicherheitshinweise Lesen Sie die elektrischen und Sicherheitsinformationen unten, bevor Sie das Produkt installieren oder betreiben. Nicht fallen lassen. Nicht auseinanderbauen. Keinen Flssigkeiten aussetzen. Verwenden Sie fr das sicherste und schnellste Aufladen Original- oder zertifizierte Kabel. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40C nicht bersteigen. Offene Flammen wie z.B. Kerzen drfen nicht auf das Produkt gestellt werden. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. Die Steckdose muss in der Nhe des Produkt installiert werden und leicht zugnglich sein. 01 02 03 04 05 06 For FAQs and more information, please visit:
anker.com/support
@anker_official
@anker_jp
@Anker Deutschland
@Anker Japan
@Anker
@AnkerOfficial
@Anker_JP Product Number: A2538 51005003171 V01 Die Trennung von der Netzspannung sollte ber den AC-Stecker erfolgen. Dieses Produkt erfllt die Anforderungen der Europischen FR Gemeinschaft an Funkstrungen. Barre de tmoins DEL tat Konformittserklrung Anker Innovations Limited erklrt hiermit, dass Produkttyp A2538 die Richtlinien 2014/53/EU und 2011/65/EU erfllt. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar:
https://www.anker.com/
Technische Daten Leistungsaufnahme 9V/12V/15V Ausgang Kabellos: 5W/7,5W/10W (fr Telefone) Max. 5W (fr Ohrhrer) USB-A: Max. 5W Betriebstemperatur
-10 C - 40 C Abgestrahltes H-Feld Abgestrahltes H-Feld(fr Telefone) 9.44dBuA/m(@10m) Abgestrahltes H-Feld (fr Ohrhrer)
-1.7dBuA/m(@10m) TX-/RX-Frequenzbereich 110-205kHz (nur EU und UK) Dieses Symbol bedeutet, dass das Produkt nicht als Hausmll entsorgt werden darf. Stattdessen ist es an der jeweiligen Sammelstelle fr das Recycling von Elektro- und Elektronikgerten abzugeben. Bleu fixe pendant 4secondes, puis s'teint Connect lalimentation Bleu fixe pendant 5secondes, puis s'teint Charge de votre appareil en cours Bleu clignotant rapide Mtal ou objets anormaux dtects Tmoins gauche et droit:
bleu fixe Tmoin du milieu: bleu clignotant Protection contre les surtensions ou les sous-
tensions active Vous ne pouvez pas charger votre appareil sans fil lors des T situations suivantes :
lors de l'utilisation d'un botier avec une plaque magntique/de fer;
lors de l'utilisation d'un botier avec support poigne;
lors de l'utilisation d'un tui de protection ultra-pais (> 5 mm). Connectez le chargeur sans fil un adaptateur mural Quick Charge 2.0/3.0 ou Power Delivery. Neffectuez pas le raccordement un chargeur mural 5V/1A ou un port USB dun ordinateur car cela pourrait affecter la fonction de charge sans fil. Ne placez aucun objet tranger entre votre appareil et la surface du chargeur sans fil, y compris les plaques mtalliques des supports pour voiture, les cartes magntiques, les cls, les pices de monnaie, les cartes NFC ou tout autre objet mtallique, car ils pourraient potentiellement dmagntiser le chargeur sans fil, rduire la vitesse de charge ou provoquer une surchauffe. Les chargeurs sans fil facilitent le chargement compars aux versions filaires traditionnelles. Nanmoins, restreinte par la technologie sans fil actuelle, la vitesse de chargement est plus lente que celle des chargeurs filaires. Les tempratures leves rduiront la vitesse de chargement et limiteront la puissance. Il est recommand de charger votre appareil dans un environnement une temprature infrieure 40C / 104F. Consignes de scurit importantes Veuillez vous rfrer aux informations lectriques et de scurit sur le dessous avant de monter ou dutiliser le produit. Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Afin de garantir un chargement plus rapide et plus sr, utiliser les cbles dorigine ou des cbles certifis. Ce produit est adapt uniquement aux climats temprs. La temprature ambiante maximale pendant lutilisation de ce produit ne doit pas dpasser 40C. Ce produit ne doit pas tre expos des sources de flamme nue telles que les bougies. accessible. La dconnexion de l'alimentation secteur doit tre effectue via la prise C.A. Ce produit est conforme aux exigences en matire dinterfrences radio de la Communaut europenne. Dclaration de conformit Par la prsente, Anker Innovations Limited dclare que ce produit de type A2538 est conforme aux Directives 2014/53/EU et 2011/65/EU. Le texte intgral de la dclaration de conformit pour lUE est disponible ladresse suivante:
https://www.anker.com/
Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Limportateur suivant est la partie responsable (contact pour les questions europennes uniquement) AnkerInnovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. La prise de courant doit se situer proximit du produit et tre facilement Champ H rayonn Spcifications Entre Sortie 9V/12V/15V Sans fil: 5W / 7,5W / 10W (pour tlphones) 5W Max (pour couteurs) USB-A: 5W maximum Temprature de fonctionnement
-10C - 40 C H-Field rayonn(pour les tlphones) 9.44dBuA/m(@10m) Champ H rayonn (pour les couteurs)
-1.7dBuA/m(@10m) 110 205KHz (pour lUE / le Royaume-
Uni uniquement) Gamme de frquence TX/RX Ce symbole indique que ce produit ne doit pas tre trait comme un dchet mnager. Il doit plutt tre remis au point de collecte appropri pour le recyclage des quipements lectriques et lectroniques. JP LED 4 5 LED :
LED :
T
(5 mm ) Quick Charge 2.0/3.0 Power Delivery 5V/1A USB
NFC ) 40 C Customer Service DE: Kundenservice FR: Service Client JP:
support@anker.com support.mea@anker.com (For Middle East and Africa Only) 40
( ) AC 9V/12V/15V
:5W/7.5W/10W ( ) 5W ( ) USB-A: 5W
-10 C - 40 C EN: 18-month limited warranty* | DE: 18 Monate eingeschrnkte Garantie*
FR: Garantie limite de 18 mois* | JP: 18 EN: Lifetime technical support | DE: Technischer Support fr die Produktlebensdauer FR: Assistance technique vie | JP:
(US) +1 (800)988 7973 Mon-Fri 6:15 - 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00;
Sat-Sun 6:00-14:00
(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00
(Middle East & Africa) +971 42463266 Sun-Thu 9:00 - 17:30
(UAE) +971 8000320817 Sun-Thu 9:00 - 17:30
(KSA) +966 8008500030 Sun-Thu 8:00 - 16:30
(Kuwait) +965 22069086 Sun-Thu 8:00 - 16:30
(Egypt) +20 8000000826 Sun-Thu 7:00 - 15:30
(AU) +61 3 8331 4800 Mon-Fri 8:30 - 17:00 (AEST)
(TR) +90 0850 460 14 14 Mon-Fri 9:00 - 18:00
(RU) +8 (800) 511-86-23 Mon-Fri 9:00 - 18:00 (MSK)
9:00 - 17:30
) +86 400 0550 036
) 03 4455 7823
+82 02-1670-7098 - 10:00 - 17: 00 9:00 - 17:00
07 08 09 10 11 12 13 14