FCC ID: 2AOKB-T8B00 C210 SoloCam

QUICK START GUIDE eufy Security C210 SoloCam Model:T8B00 AT A GLANCE CHARGING YOUR SOLOCAM C210 SoloCam Model: T8B00 Camera Lens Motion Sensor Microphone Photosensitive Sensor LED Indicator Speaker SYNC Button USB-C Charging Port

(with Sealing Cap) Mounting Hole 5V/2A Charging Fully Charged Charging Time Solid Blue Off 4.5 Hours SETTING UP THE SYSTEM 1. Download and install the eufy Security app, then sign in or create an account. MOUNTING YOUR SOLOCAM Select a Location This camera can be mounted on a wall. Select a location where you can get the desired view. We recommend mounting the camera 7-10 ft (2-3 m) above the ground to achieve up to 26 ft of motion detection range. Mount the Camera This camera can be mounted both outdoors and indoors. 1. Loosen the cover of the mounting bracket by turning it counterclockwise and disassemble the mounting bracket. 2. Follow the in-app instructions to add the camera to the device list. Camera Field of View 10 t f 0 1

7

) m 3

2

Motion Detection Zone Up to 26 ft (8 m) 2. For walls that are made out of hard materials, such as stucco, brick, or concrete, drill holes with a 15/64 inch

(6mm) drill bit, then insert the anchors into the holes.

- For soft surfaces such as wood, skip this step. Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005004027 V1 01 02 03 04 05 06 3. Firmly screw the base of the mount onto the wall. Reassemble the mounting bracket. The C210 SoloCam can also be installed on the ceiling. Follow the steps above to install it. For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status. 4. Screw the camera onto the mounting bracket. Position the camera to achieve the desired view, checking it using the live stream in the eufy Security app. SAFETY The suitable temperature for devices and accessories is -20C to 50C (Charging temperature is 0C to 40C). Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature. Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments. It is recommended to supply the device in an environment with a temperature that ranges from 5C to 25C. When supplying power, place the device in an environment that has a normal room temperature and good ventilation. CAUTION!

THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS. ATTENTION!

IL EXISTE UN RISQUE DEXPLOSION EN CAS DUTILISATION DUN TYPE DE PILE INCORRECT.LIMINEZ LES PILES USAGES CONFORMMENT AUX INSTRUCTIONS. Warning:

Replacing a battery with an incorrect type may bypass safeguards and create danger;

Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;

Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;

A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases. Attention :

Le remplacement dune batterie par un type incorrect peut contourner les protections et crer un danger ;

Llimination dune pile dans un feu ou une autre source de chaleur importante, ou par crasement ou dcoupage, peut entraner une explosion ainsi quune fuite de liquides et de gaz inflammables ;

Le fait de laisser une batterie dans un environnement extrmement chaud peut entraner une explosion ainsi quune fuite de liquides et de gaz inflammables ;

Une batterie soumise une pression dair extrmement faible peut provoquer une explosion ainsi quune fuite de liquides et de gaz inflammables. NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and 7 8 9 10 11 receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20 cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004 Telephone: 1-800-988-7973 IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage 12 radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition RF. CUSTOMER SERVICE 12-month limited warranty

(US) +1 (800) 988-7973

(UK) +44 (0) 1604 936200

(DE) +49 (0) 69 9579 7960

) +86 400 0550 036

) +81 03 4455 7823

(AU) +61 3 8331 4800

(Egypt) +20 8000000826

(UAE) +971 8000320817

(Kuwait) +965 22069086

(Saudi Arabia) +966 8008500030

(Middle East & Africa) +971 520750842 support@eufy.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

@EufyOfficial

@EufyOfficial

@EufyOfficial 13

Anker Innovations Limited Section 2.911(d)(5)(i) Certification Equipment Type Company name: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Product Name: C210 SoloCam FCC ID: 2AOKB-T8B00 Model(s): T8B00 2.911(d)(5)(i) Equipment Type We, [Anker Innovations Limited] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: louis Qi Date: 2023-06-02 Title and Company name: Manager/ Anker Innovations Limited NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Anker Innovations Limited Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Product Name: C210 SoloCam FCC ID: 2AOKB-T8B00 Model(s): T8B00 2.911(d)(5)(ii) Applicant filing We, [Anker Innovations Limited] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: louis Qi Date: 2023-06-02 Title and Company name: Manager/ Anker Innovations Limited NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Anker Innovations Limited Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 4/24/23

[Anker Innovations Limited] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought

(FCC ID: 2AOKB-T8B00):

Name and company of U.S. agent:Fantasia Trading LLC Physical U.S. address of agent:5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 FRN of U.S. agent: 0033423005 Email address of U.S. agent

:louis.qi@anker-in.com Fantasia Trading LLC acknowledges their obligation to accept service of process on behalf of [Anker Innovations Limited].

[Anker Innovations Limited] with the FRN 0027073105 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] Louis Qi

[Title ] Compliance Manager 4 0 V

[Company] Anker Innovations Limited

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U Signature

[Name of U.S. agent] Louis Qi

[Title of U.S. agent] Compliance Manager

[Company of U.S. agent] Fantasia Trading LLC

l e d o m

_ 8 4 The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Anker Innovations Limited Letter of Authorization Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: C210 SoloCam Model Number(s): T8B00 Product Description: C210 SoloCam We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

louis Qi Title:

Manager Company: Anker Innovations Limited Date: 2023-06-09

Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AOKB-T8B00 Date: 2023-06-02 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: louis Qi Title: Manager